Makita DCS 6000I, DCS 6800I Chain brake, Tightening the saw chain, Checking the chain tension

Page 19

G

-Turn the chain tightener (C/6) to the right (clockwise) until the chain engages the guide groove of the bottom side of the bar (see circle). Press the guide bar against the housing with your left hand.

Tightening the saw chain

I

-Slightly lift the end of the guide bar and turn the chain adjusting screw (C/6) to the right (clockwise) until the chain rests against the bottom side of the guide bar.

-While still holding up the tip of the guide bar, tighten the retaining nuts (H/3) with the universal wrench.

Chain brake

 

 

 

 

3

 

 

 

 

 

H

4

 

 

 

 

 

 

 

-Replace the sprocket guard (H/4).

-Manually tighten the retaining nuts (H/3).

Checking the chain tension

STOP

J

-The tension of the chain is correct if the chain rests against the bottom side of the guide bar and can still be easily turned by hand.

-While doing so the chain brake must be released.

-Check the chain tension frequently - new chains tend to get longer during use!

-When checking the chain tension the engine must be switched off.

NOTE: It is recommended to use 2-3 chains alternatively. In order to guarantee uniform wear of the guide bar the bar should be turned over whenever replacing the chain.

K

The MAKITA models comes with an inertia chain brake as standard equipment. If kickback occurs due to contact of the guide-bar tip with wood (see SAFETY PRECAUTIONS), the chain brake will stop the chain through inertia if the kickback is sufficiently strong. The chain will stop within a fraction of a second.

The chain brake is installed to block the saw chain before starting it and to stop it immediately in case of an emergency.

32

1

L

Engaging the chain brake (braking)

If the kickback is strong enough the sudden acceleration of the guide bar combined with the inertia of the hand guard (L/1) will automatically actuate the chain brake.

To engage the chain brake manually, simply push the hand guard (L/1) forward (towards the tip of the saw) with your left hand (arrow 2).

Releasing the chain brake

Pull the hand guard (L/1) towards you (arrow 3) until you feel it catch. The brake is now released.

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Owner’s Safety Manual RE Y Makita DCS 6000i ContentsDelivery inventory SymbolsRecycling Additional safety precautions Safety precautions for chain saw operatorsOperator General Safety PrecautionsDiscription of symbols used on chain saws Ansi B175.1-1991Transporting the chain saw Proper clothingSaw Use of the sawFueling instructions Chain saw operating instructionsFeet FuelingWorking conditions Important adjustmentsCutting instructions Reactive forces during the cut, including kickback KickbackDepth gauges Saw chain cutter sharpnessTo avoid kickback Speed of contact at which the cutter contacts the objectTo avoid pull-in Cutting techniquesPushback To avoid pushback= cutting down area Felling instructionsSectioning Method Plunge-Cut MethodBucking Limbing129 Maintaining and storing the saw Maintenance and RepairYear of manufacture 523.102.672 443.053.661 Denomination of components Identification plateDCS Serial noLength Pitch Technical dataApproved bar and chain combinations Models Makita DCS 6000iMounting the guide bar and saw chain StopEngaging the chain brake braking Chain brakeTightening the saw chain Checking the chain tensionHandling and storage Waste oilFuel / Refuelling Fuel mixtureLubricating the chain Adjusting the chain lubricationClean screw cap and tank after refuelling RefuellingStopping the engine Starting the engineChecking the chain brake Checking the chain lubrication Adjusting the carburetorExcessive depth increases the risk of kickback Working in winterSharpening the saw chain 030Files and how to work with them Cleaning the guide barProtective gloves must be worn Replacing the saw chain Cleaning the brake band and sprocket interiorReplacing the suction head Electrode gap Cleaning the air filterReplacing the spark plug Stop Champion RCJ-6Y or NGK Bpmr 7AReplacing/cleaning the spark arrester screen Replacing the return spring Replacing the starter cableInstructions for daily and periodic maintenance Service, spare parts and guaranteeMaintenance and repair Malfunction System Observation Cause TroubleshootingGuarantee Spare partsBar and chain combinations Canada Extract from the spare parts list DCSPage Makita U.S.A., INC Makita Canada INC

DCS 6800I, DCS 6000I specifications

The Makita DCS 6000I and DCS 6800I are two formidable chainsaw models from a brand renowned for its commitment to durability, performance, and innovation. Both saws are designed for professional users who require power, efficiency, and precision in their cutting tasks.

Starting with the DCS 6000I, it offers an impressive engine displacement of 59 cc, producing high torque and enabling effective cutting through thick wood with ease. Its lightweight design, weighing approximately 5.8 kg, ensures better maneuverability during extended use. The DCS 6000I incorporates a 20-inch guide bar, making it suitable for a variety of applications, from felling trees to milling logs.

A key feature of the DCS 6000I is its advanced anti-vibration technology, which minimizes user fatigue and enhances comfort. The model is equipped with an automatic chain lubrication system that maintains optimal performance and prolongs the lifespan of the chain. The air cleaner is easily accessible and designed to filter out debris, ensuring clean air intake and efficient engine performance.

Moving on to the DCS 6800I, it takes power to the next level, featuring a robust 66 cc engine. This model is an ideal choice for professional users involved in heavy-duty cutting tasks. Weighing approximately 6.2 kg, it strikes a balance between power and manageability. Its 24-inch guide bar makes it a perfect fit for felling larger trees and undertaking more demanding forestry work.

The DCS 6800I is characterized by its high-performance oil pump that allows for adjustable flow rates, ensuring efficient lubrication based on the cutting conditions. Additionally, this model features an innovative decompression valve, allowing for easy starting and improved user experience. The DCS 6800I also has a semi-automatic choke that enhances startup efficiency.

Both models exhibit excellent build quality, featuring magnesium components that contribute to their lightweight yet robust structure. They also come with a tool-less air filter cover, facilitating ease of maintenance. Safety is a priority with both saws, equipped with chain brakes and throttle locks to prevent accidental starts.

In summary, the Makita DCS 6000I and DCS 6800I are exceptional chainsaws that cater to the needs of professional users. With advanced technologies, durable construction, and innovative features, these models are well-suited for various applications in forestry and landscaping, ensuring reliability, efficiency, and safety in all cutting tasks.
Top Page Image Contents