Makita DCS 6000I, DCS 6800I manual Symbols, Delivery inventory, Recycling

Page 3

Delivery inventory

2

4 3

1

1.

Chain saw

 

 

 

 

 

 

 

 

 

 

 

 

2.

Guide bar

5

6

7

3.

Saw chain

 

 

 

 

 

 

4.Chain protection cover

5.Universal wrench

6.Screwdriver for carburetor adjustment

7.Offset screwdriver

8.Owner’s and Safety Manual (not shown)

Symbols

In case one of the parts listed should not be included in the delivery inventory, please consult your sales agent.

You will notice the following symbols on the saw and in the Owner’s and Safety Manual:

Read Owner’s and Safety Manual and follow the warning- and safety precautions!

Particular care and caution!

Forbidden!

Wear protective helmet, eye and ear protection!

No smoking!

No open fire!

On/Off (I/O) switch

Engine - manual start

Choke switch

STOP Stop engine!

Wear protective gloves!

Chain brake

Caution, kickback!

Fuel and oil mixture

Carburetor adjustment

Chain oil fill/oil pump

Working in winter

First aid

 

Further

Recycling

symbols

RE Y

see page 5.

3

Image 3
Contents Owner’s Safety Manual RE Y Makita DCS 6000i ContentsSymbols Delivery inventoryRecycling Additional safety precautions Safety precautions for chain saw operatorsOperator General Safety PrecautionsDiscription of symbols used on chain saws Ansi B175.1-1991Transporting the chain saw Proper clothingSaw Use of the sawFueling instructions Chain saw operating instructionsFeet FuelingImportant adjustments Working conditionsCutting instructions Reactive forces during the cut, including kickback KickbackDepth gauges Saw chain cutter sharpnessTo avoid kickback Speed of contact at which the cutter contacts the objectTo avoid pull-in Cutting techniquesPushback To avoid pushback= cutting down area Felling instructionsSectioning Method Plunge-Cut MethodLimbing Bucking129 Maintaining and storing the saw Maintenance and RepairYear of manufacture 523.102.672 443.053.661 Denomination of components Identification plateDCS Serial noLength Pitch Technical dataApproved bar and chain combinations Models Makita DCS 6000iMounting the guide bar and saw chain StopEngaging the chain brake braking Chain brakeTightening the saw chain Checking the chain tensionHandling and storage Waste oilFuel / Refuelling Fuel mixtureLubricating the chain Adjusting the chain lubricationClean screw cap and tank after refuelling RefuellingStarting the engine Stopping the engineChecking the chain brake Checking the chain lubrication Adjusting the carburetorExcessive depth increases the risk of kickback Working in winterSharpening the saw chain 030Cleaning the guide bar Files and how to work with themProtective gloves must be worn Cleaning the brake band and sprocket interior Replacing the saw chainReplacing the suction head Electrode gap Cleaning the air filterReplacing the spark plug Stop Champion RCJ-6Y or NGK Bpmr 7AReplacing/cleaning the spark arrester screen Replacing the return spring Replacing the starter cableService, spare parts and guarantee Instructions for daily and periodic maintenanceMaintenance and repair Malfunction System Observation Cause TroubleshootingGuarantee Spare partsBar and chain combinations Canada Extract from the spare parts list DCSPage Makita U.S.A., INC Makita Canada INC