Simplicity ZT4000 Series manual Safety Decals, Objects Hazard

Page 13

Safety Decals

This unit has been designed and manufactured to provide you with the safety and reliability you would expect from an industry leader in outdoor power equipment manufacturing.

Although reading this manual and the safety instructions it contains will provide you with the necessary basic knowledge to operate this equipment safely and effectively, we have placed several safety labels on the unit to remind you of this important information while you are operating your unit.

All DANGER, WARNING, CAUTION and instructional messages on your rider and mower should be carefully read and obeyed. Personal bodily injury can result when these instructions are not followed. The information is for your safety and it is important! The safety decals below are on your rider and mower.

If any of these decals are lost or damaged, replace them at once. See your local dealer for replacements.

These labels are easily applied and will act as a constant visual reminder to you, and others who may use the equipment, to follow the safety instructions necessary for safe, effective operation.

6

4

1

2

5

3

Operator Safety

1

2
2	AMPUTATION	AND THROWN
	OBJECTS HAZARD

To avoid injury from rotating blades, stay clear of deck edge and keep others away. Do not mow without discharge chute or entire grass catcher in place.

3



4

5

6

11

Image 13

Contents 26HP Zero-Turn Riders 24HP Zero-Turn Riders Mfg. No Description 5900707Mfg. No Description 5900765 Date Purchased Table of Contents Read the Manual Operating SafetyChildren Thrown Objects Slope OperationMoving Parts Retaining Walls, Drop-offs, and Water Roll Bar UseOverhead Obstacles Enclosed Areas Fuel and MaintenanceTransporting and Storage General OperationEmissions Towed Equipment Ride-On UnitsIgnition System Operating on steep slopes can be dangerousService & Maintenance Service and MaintenanceSafe Handling of Gasoline Operational Warnings Roll Bar InstructionsInspection of the Roll Bar Protective Structure Inspection and Maintenance of the Roll Bar Seat Belt Objects Hazard Safety DecalsOperational Safety Checks Safety Interlock SystemSafety Icons North American Safety IconsCE Models Identification NumbersCE Identification Tag Markings North American ModelsParking Brake PTO Power Take Off SwitchChoke Hour Meter / Maintenance Reminder Ignition SwitchSeat Adjustment Lever Throttle ControlChecks Before Starting General Operating SafetyCheck Tire Pressures Seat AdjustmentPushing the Rider by Hand OperationFoot Pedal Adjustment Mowing Height AdjustmentTo Adjust Pedal Position Stopping the Rider Starting the EngineSmooth Travel Zero-Turn Driving PracticeForward Travel Practice Executing an End-Of-Row Zero Turn Practice Turning Around a CornerPractice Turning In Place Mowing StorageMowing Recommendations Fire or explosion can cause severe burns or deathMowing Methods Proper Mulching Attaching a TrailerMulching Requires Excellent Mowing Conditions How Much Grass to MulchCheck Rider / Mower for loose hardware Maintenance ScheduleFuel Filter Checking / Adding FuelChange Oil & Filter Inspect Muffler and Spark ArresterCheck Hydraulic Oil Level Battery MaintenanceChange Hydraulic Oil Filter Grease LubricationOil Lubricating the Front CastersInspecting the Mower Blades Servicing The Mower BladesBalancing the Mower Blade Nail Reinstalling the Mower BladesSpeed Balancing Adjustment Ground Speed Control Lever AdjustmentReturn-to-Neutral Adjustment Neutral AdjustmentTo Adjust Hydraulic Pump Drive Belt Replacement Parking Brake AdjustmentTo adjust the spring pre-load Rear Suspension AdjustmentSpring loaded components can kick back causing injury Deck Lift Rod Timing And Leveling Adjustment Mower PTO Belt Idler Arm Stationary Idler Pulley Mower Belt ReplacementTroubleshooting the Rider TroubleshootingTroubleshooting the Mower Troubleshooting the RiderStreaking Troubleshooting Common Cutting ProblemsHydroGear PG-3H / HGM-12E HP Briggs & StrattonDeck Indentification Product Quick Specs