Simplicity 1692959, 1692963, 1692957, 1692961, 1692973 Trim Installation, Face Mask Installation

Trim Installation

Face	Mask	installation:
1 . Position the face mask onto
the unit with the hook in the
middle grille slot, and line
up with the holes on the
outside of the side panels
(note that the front of the
face mask must be in the
“V” position for proper fit.)
2. Insert one Carriage Bolt			Hook from Face
			Mask goes into
through each		of the two
			middle gri//e s/o’\
mounting holes at the rear
of the face mask, and into
the	side panels.

3.Place one washer onto each Carriage Bolt from the inside of the panel.

4.Thread one Nut onto each Carriage Bolt.

5.Check that the Face Mask is in the proper position and

orientation.	NOTE: “V” positioning	-I\\-
6. Tighten the Nuts securely.		Carriage1 Bolt	b