Lexicon 284 manual Stereo Loop Examples, Stereo Effects

Page 12

Rear Panel Connections

Lexicon

3.Connect the mono (or right) output of the effect to the right return of the Signature 284.

4.Set the guitar, preamp and the Left Volume control of the Signature 284 for your loudest playing.

5.Turn up the effect input control to optimum level.

6.Set the Right Volume control of the Signature 284 to the same position as the Left Volume. (No sound will be heard from the right side yet.)

7.Turn up the effect output control until the left level matches the right. (The effects unit is now properly set.)

8.Connect the second channel of the effect to left side of the loop.

Stereo Loop Examples

Stereo Effects

Inserting a Stereo In-Stereo Out processor in the Signature 284 Effects Loop

Inserting a Mono In-Stereo Out processor in the Signature 284 Effects Loop

8

Image 12

Contents User Guide Unpacking and Inspection AcknowledgementContents Limited Warranty Introduction Power and Standby Guitar Input Gain Front Panel ControlsPull for Boost Tone Controls Getting the Feel of the SignatureBass, Midrange, Treble and Presence Volume Front Panel Controls Rear Panel Connections Speaker OutputsSlave Outputs Recording Outputs Loop vs. Mixer Bus for Effects StereoStereo Loop Examples Stereo EffectsMono Loop Example Dual Mono EffectsInserting a Mono Effect Signature 284 Effects Loop Rear Panel Guitar Input Applications Direct recording Recording with directs and microphonesApplications Example Settings Clean Stratocaster/Neck pickup Clean FunkClean Country Stratocaster, Telecaster Jazzy 60s Vox Humbucker BridgeSinging Lead Stratocaster/Neck One Size Fits All Using the Signature 284 with non-Guitar Sources Power Amp for Tube Warmth HarpKeyboards Lead SynthVocals Acoustic GuitarDigital Effects Re-AmpingPrecautions and Maintenance PrecautionsSpecifications Lexicon Inc Oak Park