Electrolux GT21L instruction manual Fueling Engine, HOW to Stop Your Unit, HOW to Start Your Unit

Page 5

WARNING: Be sure to read the fuel information in the safety rules before you be- gin. If you do not understand the safety rules, do not attempt to fuel your unit. Contact an authorized service dealer.

FUELING ENGINE

WARNING: Remove fuel cap slowly when refueling.

This engine is certified to operate on un- leaded gasoline. Before operation, gasoline must be mixed with a good quality synthetic 2-cycle air-cooled engine oil designed to be mixed at a ratio of 40:1 (2.5%). A 40:1 ratio is obtained by mixing 5 liters of unleaded gaso- line with 0,125 liter of oil. DO NOT USE auto- motive oil or boat oil. These oils will cause en- gine damage. When mixing fuel, follow instructions printed on oil container. Once oil is added to gasoline, shake container mo- mentarily to assure that the fuel is thoroughly mixed. Always read and follow the safety rules relating to fuel before fueling your unit.

IMPORTANT

Experience indicates that alcohol blended fuels (called gasohol or using ethanol or methanol) can attract moisture which leads to separation and formation of acids during stor- age. Acidic gas can damage the fuel system of an engine while in storage. To avoid engine problems, empty the fuel system before stor- age for 30 days or longer. Drain the gas tank, start the engine and let it run until the fuel lines and carburetor are empty. Use fresh fuel next season. Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

HOW TO STOP YOUR UNIT

S To stop the engine, move the ON/OFF switch to the OFF position.

HOW TO START YOUR UNIT

WARNING: The trimmer head will turn while starting the engine. Avoid any con- tact with the muffler. A hot muffler can cause serious burns.

STARTING A COLD ENGINE (or a warm engine after running out of fuel)

Starting Position

Starter Handle

Choke

Lever

Primer Bulb

Muffler

1.Set unit on a flat surface.

2.Move ON/OFF switch to the ON position.

3.Slowly press the primer bulb 6 times.

4.Move choke lever to FULL CHOKE posi- tion.

5.Squeeze and hold trigger through all re- maining steps.

6.Pull starter rope handle sharply until en- gine sounds as if it is trying to start, but do not pull rope more than 6 times.

7.As soon as engine sounds as if it is trying to start, move choke lever to HALF CHOKE.

8.Pull starter rope sharply until engine runs, but no more than 6 pulls. If the engine doesn’t start after 6 pulls (at the HALF CHOKE position), move the choke lever to the FULL CHOKE position and press the primer bulb 6 times. Squeeze and hold the throttle trigger and pull the starter rope 2 more times. Move the choke lever to the HALF CHOKE position and pull the start- er rope until the engine runs, but no more than 6 pulls.

NOTE: If engine still doesn’t start, it is probably flooded. Proceed to STARTING A FLOODED ENGINE.

9.Once the engine starts, allow it to run 10 seconds, then move the choke lever to OFF CHOKE. Allow the unit to run for 30 more seconds at OFF CHOKE before re- leasing the throttle trigger.

NOTE: If engine dies with the choke le- ver in the OFF CHOKE position, move the choke lever to the HALF CHOKE position and pull the rope until engine runs, but no more than 6 pulls.

STARTING A WARM ENGINE

1.Move ON/OFF switch to the ON position.

2.Move the choke lever to the HALF CHOKE position.

3.Squeeze and hold the throttle trigger. Keep throttle trigger fully squeezed until the engine runs smoothly.

4.Pull starter rope sharply until engine runs, but no more than 5 pulls.

5.Allow engine to run 15 seconds, then move the choke lever to the OFF CHOKE position.

5

Image 5
Contents N S E R E ON/OFF Fuel Safety Operator SafetyUnit / Maintenance Safety Adjusting the Handle Cutting SafetyTransporting and Storage Attaching the ShieldHOW to Start Your Unit HOW to Stop Your UnitFueling Engine Starting a Warm EngineOperating Position Starting a Flooded EngineTrimmer Line Advance Cutting MethodsClean AIR Filter Inspect and Clean Unit and LabelsCheck for Loose Fasteners and Parts Check for Damaged or Worn PartsReplacing the Line Carburetor AdjustmentSeasonal Storage EngineTroubleshooting Table Cause Remedy Where to GET Warranty Service Page Weight

GT21L specifications

The Electrolux GT21L is a modern refrigerator designed to meet the needs of today's consumers, combining functionality with energy efficiency and advanced technology. This appliance is particularly notable for its spacious interior and user-friendly features, making it a popular choice for households of varying sizes.

One of the standout features of the Electrolux GT21L is its impressive capacity. With ample storage space for groceries, the refrigerator allows users to easily organize their food items. The adjustable shelves offer flexibility in storage solutions, enabling users to accommodate larger items such as beverages or cakes without hassle. Additionally, the design of the interior shelving is optimized for easy access, ensuring that every item can be quickly located.

Energy efficiency is another key characteristic of the GT21L. Equipped with an energy-saving mode, this refrigerator contributes to reduced electricity bills while minimizing its environmental impact. The appliance typically meets or exceeds energy standards, making it an eco-friendly choice for consumers who prioritize sustainability.

The GT21L also incorporates advanced cooling technologies that ensure optimal temperature control. The Dynamic Cooling System helps maintain even temperatures throughout the refrigerator, preventing temperature fluctuations that can spoil food. This technology not only preserves food quality but also extends the shelf life of perishables.

In terms of design, the Electrolux GT21L boasts a sleek and modern appearance that fits seamlessly into any kitchen décor. Its stainless steel finish is both stylish and easy to clean, while the minimalistic controls add to its contemporary appeal.

Convenience features are abundant in the GT21L. The appliance is typically fitted with an intuitive digital display that allows users to easily adjust settings. Additionally, some models may include a water and ice dispenser, providing instant access to chilled water and ice cubes, enhancing the overall functionality of the refrigerator.

In conclusion, the Electrolux GT21L stands out with its combination of spacious storage, energy efficiency, advanced cooling technologies, and modern design. This refrigerator is not just an appliance; it represents a commitment to quality and convenience, making it an excellent addition to any kitchen. With the GT21L, consumers can enjoy the perfect blend of style and performance, ensuring their food is stored safely and efficiently.