Electrolux GT21L Replacing the Line, Carburetor Adjustment, Seasonal Storage, Engine, Other

Page 8

REPLACING THE LINE

1.Move the ON/OFF switch to the OFF position.

2.Disconnect the spark plug lead wire.

3.Remove spool by firmly pulling on tap but- ton. Clean entire surface of hub and spool. Replace with a pre-wound spool, or cut a length of 6 meters of 1,6 mm diame- ter line.

WARNING: Never use wire, rope, string, etc., which can break off and become a dangerous missile.

4.Insert one end of the line about 1 cm into the small hole on the inside of spool.

Small

 

Hole

Spool

 

5.Wind the line evenly and tightly onto the spool. Wind in the direction of the arrow found on the spool.

6.Push the line into the notch, leaving 7 -- 12 cm unwound.

7.Insert the line into the the exit hole in the hub as shown in the illustration.

8.Align the notch with the line exit hole.

9.Push spool into hub until it snaps into place.

10.Pull the line extending outside of the hub to release it from the notch.

CARBURETOR ADJUSTMENT

Your carburetor is equipped with limiter caps. Damage will occur if you turn the needles be- yond the limiter stops. Carburetor adjustment is a complicated task. We recommend that you take your unit to an authorized service dealer.

Line in

Notch

Hub

Line exit hole

 

WARNING: Perform the following steps after each use:

SAllow engine to cool before storing or trans-

porting.

SStore unit and fuel in a well ventilated area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc.

SEmpty fuel tank before storing or transport- ing the unit.

SStore unit and fuel well out of the reach of children.

S Store unit with all guards in place. Position

unit so that any sharp object cannot acci- dentally cause injury.

SEASONAL STORAGE

Prepare unit for storage at end of season or if it will not be used for 30 days or more.

If your unit is to be stored for a period of time: S Clean the entire unit before lengthy stor-

age.

SStore in a clean dry area.

S Lightly oil external metal surfaces.

ENGINE

SRemove spark plug and pour 1 teaspoon of 40:1, 2-cycle engine oil (air cooled) through

the spark plug opening. Slowly pull the starter rope 8 to 10 times to distribute oil.

SReplace spark plug with new one of recom-

mended type and heat range.

SClean air filter.

S Check entire unit for loose screws, nuts, and bolts. Replace any damaged, broken, or worn parts.

S At the beginning of the next season, use only fresh fuel having the proper gasoline to oil ratio.

OTHER

SDo not store gasoline from one season to another.

S Replace your gasoline can if it starts to rust.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents N S E R E ON/OFF Fuel Safety Operator SafetyUnit / Maintenance Safety Cutting Safety Adjusting the HandleTransporting and Storage Attaching the ShieldHOW to Stop Your Unit HOW to Start Your UnitFueling Engine Starting a Warm EngineStarting a Flooded Engine Operating PositionTrimmer Line Advance Cutting MethodsInspect and Clean Unit and Labels Clean AIR FilterCheck for Loose Fasteners and Parts Check for Damaged or Worn PartsCarburetor Adjustment Replacing the LineSeasonal Storage EngineTroubleshooting Table Cause Remedy Where to GET Warranty Service Page Weight

GT21L specifications

The Electrolux GT21L is a modern refrigerator designed to meet the needs of today's consumers, combining functionality with energy efficiency and advanced technology. This appliance is particularly notable for its spacious interior and user-friendly features, making it a popular choice for households of varying sizes.

One of the standout features of the Electrolux GT21L is its impressive capacity. With ample storage space for groceries, the refrigerator allows users to easily organize their food items. The adjustable shelves offer flexibility in storage solutions, enabling users to accommodate larger items such as beverages or cakes without hassle. Additionally, the design of the interior shelving is optimized for easy access, ensuring that every item can be quickly located.

Energy efficiency is another key characteristic of the GT21L. Equipped with an energy-saving mode, this refrigerator contributes to reduced electricity bills while minimizing its environmental impact. The appliance typically meets or exceeds energy standards, making it an eco-friendly choice for consumers who prioritize sustainability.

The GT21L also incorporates advanced cooling technologies that ensure optimal temperature control. The Dynamic Cooling System helps maintain even temperatures throughout the refrigerator, preventing temperature fluctuations that can spoil food. This technology not only preserves food quality but also extends the shelf life of perishables.

In terms of design, the Electrolux GT21L boasts a sleek and modern appearance that fits seamlessly into any kitchen décor. Its stainless steel finish is both stylish and easy to clean, while the minimalistic controls add to its contemporary appeal.

Convenience features are abundant in the GT21L. The appliance is typically fitted with an intuitive digital display that allows users to easily adjust settings. Additionally, some models may include a water and ice dispenser, providing instant access to chilled water and ice cubes, enhancing the overall functionality of the refrigerator.

In conclusion, the Electrolux GT21L stands out with its combination of spacious storage, energy efficiency, advanced cooling technologies, and modern design. This refrigerator is not just an appliance; it represents a commitment to quality and convenience, making it an excellent addition to any kitchen. With the GT21L, consumers can enjoy the perfect blend of style and performance, ensuring their food is stored safely and efficiently.
Top Page Image Contents