Poulan S31SNGBC Operating the Coupler, Operating Position, Installing Optional ATTACH- Ments

Page 10

If the unit still doesn’t start, refer to TROUBLESHOOTING TABLE or call 1-800-554-6723.

OPERATING THE COUPLER

This model is equipped with a coupler which enables optional attachments to be installed. The optional attachments are:

MODEL:

Edger . . . . . . . . . . . . . . . . . . . . . .SNE31 Cultivator . . . . . . . . . . . . . . . . . . .SNT31 Blower . . . . . . . . . . . . . . . . . . . . .SNB31

WARNING: Always stop unit and dis- connect spark plug before removing or instal- ling attachments.

REMOVING TRIMMER ATTACH- MENT (OR OTHER OPTIONAL ATTACHMENTS)

CAUTION: When removing or installing at- tachments, place the unit on a flat surface for stability.

1. Loosen the coupler by turning the knob

WARNING: Make sure the locking/ release button is locked in the primary hole and the knob is securely tightened before op- erating the unit.

OPERATING POSITION

ALWAYS WEAR:

Hearing

Protection

Eye Protection

Heavy,

Long Pants

Boots

Cut from your left to your right.

When operating unit, clip shoulder strap onto

counterclockwise.

Coupler

Upper Tube

clamp, stand as shown and check for the fol- lowing:

SWear eye protection and heavy clothing.

S Extend your left arm and hold handlebar

Lower

LOOSEN

grip with your left hand.

SHold throttle grip with your right hand with

Attachment

TIGHTEN Knob

2.Press and hold the locking/release button. Locking/Release

Button

Coupler

Upper Tube

Lower Attachment

 

3.While securely holding the engine and upper tube, pull the attachment straight out of the coupler.

INSTALLING OPTIONAL ATTACH- MENTS

1.Remove the tube cap from the attach- ment (if present).

2.Position locking/release button of attach- ment into guide recess of coupler.

3.Push the attachment into the coupler until the locking/release button snaps into the primary hole.

4.Before using the unit, tighten the knob se- curely by turning clockwise.

Coupler

Primary Hole

 

Guide Recess

Upper

Locking/ Attachment

Tube

Release

 

Button

finger on throttle trigger.

SKeep unit below waist level.

SKeep shoulder strap pad centered on your left shoulder and danger sign centered on your back.

S Maintain full weight of tool on your left shoulder.

S Without bending over, keep the blade or trimmer head near and parallel to the ground and not crowded into material being cut.

OPERATING INSTRUCTIONS FOR USE WITH TRIMMER HEAD

WARNING: Always wear eye protec- tion. Never lean over the trimmer head. Rocks or debris can ricochet or be thrown into eyes and face and cause blindness or other serious injury.

Before trimming, bring engine to a speed suffi- cient to cut material to be trimmed.

Do not run the engine at a higher speed than necessary. The cutting line will cut efficiently when the engine is run at less than full throttle. At lower speeds, there is less engine noise and vibration. The cutting line will last longer and will be less likely to “weld” onto the spool.

Always release the throttle trigger and allow the engine to return to idle speed when not cutting.

To stop engine:

SRelease the throttle trigger.

SMove the ON/OFF switch to the OFF posi- tion.

TRIMMER LINE ADVANCE

The trimmer line will advance approximately 2 in. (5 cm) each time the bottom of the trimmer head is tapped on the ground with the engine running at full throttle.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Manual de Instrucciones Manuel d’Instructions Operator Safety Always WearCutting Safety UNIT/MAINTENANCE SafetyFuel Safety Transporting and StorageAdjust and Secure the HAN- Dlebar Carton ContentsInstalling Brushcutter Attachment Tools RequiredConfiguring Your Unit Assembly of Shoulder StrapTo Relocate Shoulder Strap Clamp Attaching the Plastic Shield and Trimmer Head Assembly Information Trimmer HeadAssembly Information Weed Blade Attaching the Metal ShieldInstallation of the Metal Blade Know Your Unit ON/OFF Switch ChokeHOW to Stop Your Unit Primer BulbStarting a Flooded Engine HOW to Start Your UnitStarting a Warm Engine ON/OFFRemoving Trimmer ATTACH- Ment or Other Optional Attachments Installing Optional ATTACH- MentsOperating the Coupler Operating PositionCutting Methods TrimmingUSE with Weed Blade Operating Instructions forRecommended Cutting Position Cultivator Safety Edger SafetyBLOWER/VACUUM Safety Hedge Trimmer SafetyPole Pruner Safety Snow Thrower SafetyCheck for Loose Fasteners and Parts Inspect and Clean Unit and DE- CalsClean AIR Filter Check for Damaged or Worn PartsSeasonal Storage Blade ReplacementCarburetor Adjustment Fuel SystemTroubleshooting Table Cause Remedy OtherElectrolux Home PRODUCTS, INC

S31SNGBC specifications

The Poulan S31SNGBC is a robust and efficient chainsaw designed for both casual users and those looking for a reliable tool for various cutting tasks. This model stands out for its blend of power, ease of use, and innovative features that cater to the needs of homeowners and professionals alike.

One of the main features of the Poulan S31SNGBC is its potent 31cc engine. This 2-stroke engine provides ample power to tackle a wide range of cutting jobs, from trimming branches to felling small trees. The engine is designed for optimal performance, ensuring users can complete tasks efficiently without the need for constant refueling or frequent breaks.

The chainsaw is equipped with a 16-inch bar and chain, offering a capable cutting capacity that strikes a balance between maneuverability and cutting power. This size is ideal for handling various applications, making it an excellent choice for DIY enthusiasts and those who require a dependable tool for yard work or light commercial use.

Another significant characteristic of the Poulan S31SNGBC is its Easy Start technology. This feature simplifies the starting process, allowing users to fire up the chainsaw with minimal effort, even after extended periods of inactivity. This is particularly beneficial for less experienced users or those who may struggle with traditional starting mechanisms.

Safety is a primary consideration in the design of the S31SNGBC. It includes a chain brake that halts the chain's movement in the event of kickback, significantly enhancing user safety. Additionally, the chainsaw features anti-vibration technology, which reduces the amount of vibration transferred to the user’s hands, minimizing fatigue during prolonged use.

Maintenance is made easy with the chainsaw’s tool-less chain tensioning system. This design allows users to adjust the chain tension quickly and conveniently, ensuring optimal performance and extending the life of the chain. The clear fuel tank also provides easy visibility of fuel levels, preventing unexpected interruptions during operation.

In summary, the Poulan S31SNGBC is a versatile and user-friendly chainsaw equipped with a powerful engine, a reliable bar and chain, and several innovative features that enhance its usability and safety. This makes it an excellent choice for those looking to efficiently manage their cutting tasks without sacrificing comfort or performance. Whether you're a seasoned professional or a weekend warrior, this chainsaw offers the performance and reliability you need to accomplish your jobs effectively.
Top Page Image Contents