Cutting Methods, Trimming | Poulan S31SNGBC instruction

The most efficient line length is the maximum length allowed by the line limiter. Always keep the shield in place when the tool is being oper- ated.

To advance line:

SOperate the engine at full throttle.

SHold the trimmer head parallel to and above the grassy area.

STap the bottom of the trimmer head lightly on the ground one time. Approximately 2 in. (5 cm) of line will be advanced with each tap.

Always tap the trimmer head on a grassy area. Tapping on surfaces such as concrete or asphalt can cause excessive wear to the trimmer head.If the line is worn down to 2 inches (5 cm) or less, more than one tap will be required to obtain the most efficient line length.

WARNING: Use only 0.080! (2 mm) diameter line. Other sizes of line will not ad- vance properly and can cause serious injury. Do not use other materials such as wire, string, rope, etc. Wire can break off during cutting and become a dangerous missile that can cause serious injury.

CUTTING METHODS

Trimming

SCALPING -- The scalping technique removes unwanted vegetation down to the ground. Hold the bottom of the trimmer head about 3 in. (8 cm) above the ground and at an angle. Allow the tip of the line to strike the ground around trees, posts, monuments, etc. This technique in- creases line wear.

WARNING: Use minimum speed and do not crowd the line when cutting around hard objects (rock, gravel, fence posts, etc.), which can damage the trimmer head, become entangled in the line, or be thrown causing a serious hazard.

SThe tip of the line does the cutting. You will achieve the best performance and mini- mum line wear by not crowding the line into the cutting area. The right and wrong ways are shown below.

S The line will easily remove grass and weeds from around walls, fences, trees and flower beds, but it also can cut the tender bark of trees or shrubs and scar fences.

SFor trimming or scalping, use less than full throttle to increase line life and decrease head wear, especially:

S During light duty cutting.

S Near objects around which the line can wrap such as small posts, trees or fence

wire.

SFor mowing or sweeping, use full throttle for a good clean job.

TRIMMING -- Hold the bottom of the trimmer head about 3 inches (8 cm) above the ground and at an angle. Allow only the tip of the line to make contact. Do not force trimmer line into work area.

MOWING -- Your trimmer is ideal for mowing in places conventional lawn mowers cannot reach. In the mowing position, keep the line parallel to the ground. Avoid pressing the head into the ground as this can scalp the ground and damage the tool.

SWEEPING -- The fanning action of the rotating line can be used to blow away loose debris from an area. Keep the line parallel to and above the area surface and swing the tool from side to side.

S31SNGBC specifications

The Poulan S31SNGBC is a robust and efficient chainsaw designed for both casual users and those looking for a reliable tool for various cutting tasks. This model stands out for its blend of power, ease of use, and innovative features that cater to the needs of homeowners and professionals alike.

One of the main features of the Poulan S31SNGBC is its potent 31cc engine. This 2-stroke engine provides ample power to tackle a wide range of cutting jobs, from trimming branches to felling small trees. The engine is designed for optimal performance, ensuring users can complete tasks efficiently without the need for constant refueling or frequent breaks.

The chainsaw is equipped with a 16-inch bar and chain, offering a capable cutting capacity that strikes a balance between maneuverability and cutting power. This size is ideal for handling various applications, making it an excellent choice for DIY enthusiasts and those who require a dependable tool for yard work or light commercial use.

Another significant characteristic of the Poulan S31SNGBC is its Easy Start technology. This feature simplifies the starting process, allowing users to fire up the chainsaw with minimal effort, even after extended periods of inactivity. This is particularly beneficial for less experienced users or those who may struggle with traditional starting mechanisms.

Safety is a primary consideration in the design of the S31SNGBC. It includes a chain brake that halts the chain's movement in the event of kickback, significantly enhancing user safety. Additionally, the chainsaw features anti-vibration technology, which reduces the amount of vibration transferred to the user’s hands, minimizing fatigue during prolonged use.

Maintenance is made easy with the chainsaw’s tool-less chain tensioning system. This design allows users to adjust the chain tension quickly and conveniently, ensuring optimal performance and extending the life of the chain. The clear fuel tank also provides easy visibility of fuel levels, preventing unexpected interruptions during operation.

In summary, the Poulan S31SNGBC is a versatile and user-friendly chainsaw equipped with a powerful engine, a reliable bar and chain, and several innovative features that enhance its usability and safety. This makes it an excellent choice for those looking to efficiently manage their cutting tasks without sacrificing comfort or performance. Whether you're a seasoned professional or a weekend warrior, this chainsaw offers the performance and reliability you need to accomplish your jobs effectively.