Poulan S31BC instruction manual Carton Contents, Tools Required, Adjust and Secure the HAN- Dlebar

Page 4

Idaho, Maine, Minnesota, New Jersey, Ore- gon, and Washington require by law that many internal combustion engines be equipped with a spark arresting screen. If you operate in a locale where such regulations ex- ist, you are legally responsible for maintaining the operating condition of these parts. Failure

to do so is a violation of the law. For normal homeowner use, the muffler and spark arrest- ing screen will not require any service. After 50 hours of use, we recommend that your muffler be serviced or replaced by your autho- rized service dealer.

CARTON CONTENTS

Check carton contents against the following list:

SBrushcutter

SBlade shield screws (4) S Cupped washer

S Large nut for installing blades S Hex wrench

S Metal shield S Plastic shield

S Shoulder strap with warning S 4--point weed blade

S Trimmer head (assembled on unit) S Handlebar (assembled on unit)

S Wing nut (screwed onto shield) S Container of oil

WARNING: Always stop unit and dis- connect spark plug before performing any as- sembly procedures.

WARNING: If received assembled, repeat all steps to ensure your unit is properly assembled and all fasteners are secure.

Examine parts for damage. Do not use dam- aged parts.

NOTE: If you need assistance or find parts missing or damaged, call 1-800-554-6723.

It is normal for the fuel filter to rattle in the empty fuel tank.

Finding fuel or oil residue on muffler is normal due to carburetor adjustments and testing done by the manufacturer.

TOOLS REQUIRED

SHex wrench (provided) S Adjustable wrench

ADJUST AND SECURE THE HAN- DLEBAR

DANGER: To avoid serious injury, the barrier portion of the handlebar must be ad- justed and remain installed as shown to pro- vide a barrier between operator and the spin- ning blade. The handlebar clamp must be positioned between the arrows on the handle- bar decal.

1. Lift handlebar to upright position.

Handlebar

2.Rotate handlebar/clamp counterclock- wise toward engine until clamp falls into groove of base.

Handlebar

Handlebar

Clamp

Clamp

Knob

Clamp

Base

3.Place the handlebar in a comfortable position.

4.Retighten handlebar by turning clamp knob clockwise until handlebar is secure and stationary in clamp base (clamp knob can not be overtightened).

ASSEMBLY OF SHOULDER STRAP

WARNING: Proper shoulder strap and handlebar adjustments are required before starting the engine.

1. Try on shoulder strap and adjust for fit and balance before starting the engine or begin- ning a cutting operation.

2. Insert your right arm and head through the shoulder strap and allow it to rest on

your left shoulder. Make sure the danger sign is on your back and the hook is to the right side of your waist.

NOTE: A one-half twist is built in the shoulder strap to allow the strap to rest flat on the shoul- der.

3.Adjust the strap, allowing the hook to be about 6 inches below the waist.

4.Fasten the strap hook to the clamp located between the trigger handle and the handle- bar clamp base and lift the tool to the oper- ating position.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Manual de Instrucciones Manuel d’Instructions Operator Safety Always WearUNIT/MAINTENANCE Safety Fuel SafetyCutting Safety Transporting and StorageCarton Contents Adjust and Secure the HAN- DlebarAssembly of Shoulder Strap Tools RequiredConfiguring Your Unit Assembly Information Trimmer HeadAssembly Information Weed Blade Attaching the Plastic Shield and Trimmer HeadInstallation of the Metal Blade Attaching the Metal ShieldON/STOP Switch HOW to Stop Your UnitKnow Your Brushcutter Primer BulbStarting a Warm Engine HOW to Start Your UnitStarting a Flooded Engine Operating Instructions for USE with Trimmer Head Operating Position Trimmer Line AdvanceCutting Methods Operating Instructions for USE with Weed Blade TrimmingInspect and Clean Unit and DE- Cals Clean AIR FilterCheck for Loose Fasteners and Parts Check for Damaged or Worn PartsBlade Replacement Carburetor AdjustmentReplacing the Line Seasonal StorageTroubleshooting Table Cause Remedy Electrolux Home PRODUCTS, INC

S31BC specifications

The Poulan S31BC is a versatile and powerful piece of outdoor equipment designed to meet the demands of both homeowners and landscaping professionals. This trimmer stands out for its efficiency, durability, and user-friendly features, making it a popular choice for tackling a variety of trimming tasks.

One of the standout features of the Poulan S31BC is its robust 31cc, 2-cycle engine. This powerful engine delivers the necessary torque to handle thick underbrush and tough weeds effortlessly. The 2-cycle engine is designed for high performance while remaining lightweight, which is crucial for extended use without causing fatigue to the operator. Additionally, the engine offers easy starting technology coupled with a smooth operation, allowing for hassle-free trimming in various environments.

The design of the Poulan S31BC also embraces ergonomic principles. Its lightweight frame and adjustable handle provide optimal control and comfort, reducing strain on the user's hands and back during extended use. This trimmer is equipped with a "split-shaft" construction that allows for easy attachment changes. Users can seamlessly switch between various attachments such as brush cutters or pole saws, enhancing the tool's versatility and making it suitable for multiple landscaping tasks.

Another noteworthy feature is the dual-line feed system that efficiently manages line advancement. This allows for quicker trimming sessions and less downtime for line replacement. The S31BC utilizes a bump feed mechanism, enabling users to quickly advance more line simply by tapping the trimmer head on the ground. This feature is especially valuable when tackling larger areas, as it allows for continuous operation without interrupting workflow.

Moreover, the Poulan S31BC is designed with durability in mind. Its rugged construction ensures that it withstands the rigors of regular use, offering reliable performance season after season. Additionally, the machine's lightweight design means that it is highly portable, making it easy to transport from one job site to another.

In conclusion, the Poulan S31BC is an excellent choice for anyone seeking an efficient and reliable trimmer. With its powerful 31cc engine, ergonomic design, interchangeable attachments, and user-friendly features, it caters to a range of trimming needs, making lawn care and maintenance much simpler. Whether you're a weekend warrior or a professional landscaper, the Poulan S31BC is engineered to deliver high performance, making it an invaluable addition to your outdoor toolkit.
Top Page Image Contents