Safety and International Symbols | Troy-Bilt TB60AF specification

SAFETY INFORMATION

•This unit is intended for infrequent use by homeowners. It is not intended for prolonged use.

ELECTRICAL SAFETY PRECAUTIONS

WARNING: If battery fluid gets in the eyes, flush immediately with clean water for at least 15 minutes. Get immediate medical attention. Do not charge the battery pack in the rain or in wet conditions. Do not immerse the unit, battery pack, or charger in water or other liquid.

•A battery-operated tool with integral batteries or a separate battery pack must be recharged only with the specified charger for the battery. A charger that may be suitable for one type of battery may create a risk or fire when used with another battery.

• SAFETY AND INTERNATIONAL SYMBOLS •

This operator's manual describes safety and international symbols and pictographs that may appear on this product. Read the operator's manual for complete safety, assembly, operating, maintenance and repair information.

SYMBOL MEANING

•SAFETY ALERT SYMBOL

Indicates danger, warning or caution. May be used in conjunction with other symbols or pictographs.

•Use a battery-operated tool only with specific battery pack. Use of any other batteries may create a risk of fire.

•When the battery is not installed in the unit, keep it away from paper clips, coins, keys, nails, screws or other metal objects that could make a connection from one terminal to another. Shorting the battery terminals together may cause sparks, burns or a fire.

Battery Pack and Charger Safety

WARNING: The battery pack may develop a small leak under extreme usage or temperature conditions. If the outer seal is broken and the leakage gets on skin:

-Use soap and water to wash the area immediately.

-Neutralize with lemon juice, vinegar or other mild acid. And seek medical attention immediately.

•DO NOT probe the charger with conductive material. There is a risk of electric shock.

•DO NOT insert battery into the charger if the battery pack is cracked or damaged.

•DO NOT charge any batteries except the ones specified by the charger.

•DO NOT try to use the charger for any other purposes than what is presented in the operator’s manual.

•DO NOT charge batteries in the rain or in wet conditions. Keep the charger in a cool and dry area.

•Keep the charger away from all liquid.

•Do not allow the battery pack or charger to overheat. If they are warm, allow them to cool down. Recharge only at room temperature; 32 and 86˚ F (0 and 30˚ C).

•Do not cover the ventilation slots on the charger. Do not place charger on a soft surface. Keep the ventilation slots of the charger clean and clear of dirt and debris.

•Do not allow small metal items or material such as steel wool, aluminum foil or other foreign particles into the charger cavity.

•Handle batteries with care. Do not short the battery with conductive materials, such as rings, bracelets, keys, etc. Doing so may damage the battery or cause personal injury.

•Unplug the charger before cleaning and when not in use.

•Do not connect two chargers together.

•Do not place the charger where the power cord might be stepped on, tripped over, or subjected to damage.

•An extension cord should not be used unless absolutely necessary. Use of an improper extension cord could result in a risk of fire, electric shock or electrocution.

•DO NOT abuse the extension cord or the power cord on the unit. Never pull or carry the unit by the cord(s), use the cord(s) as a handle, close a door on a cord, pull the cord(s) around sharp edges or corners or yank the cord(s) to disconnect the unit. Grasp the plug(s), not the cord(s), to disconnect the unit.

•DO NOT modify the power cord, extension cord, power cord plug, extension cord plug or wall outlet in any way.

•DO NOT use multiple extension cords.

•Keep the cords away from oil, water, sharp objects and heated surfaces.

•Keep the cords away from the operator’s feet to prevent tripping.

•Make sure the cords are in good condition. Inspect the power cord and extension cord periodically. Look closely for deterioration, cuts or cracks in the insulation. If the power cord is damaged, have it repaired by an authorized service center. If the extension cord is damaged, replace it. Do not use a damaged cord or plug.

•READ OPERATOR'S MANUAL

WARNING: Read the operator’s manual(s) and follow all warnings and safety instructions. Failure to do so can result in serious injury to the operator and/or bystanders.

•WEAR EYE AND HEARING PROTECTION

WARNING: Thrown objects and loud noise can cause severe eye injury and hearing loss. Wear eye protection meeting ANSI Z87.1-1989 standards and ear protection when operating this unit. Use a full face shield when needed.

•WEAR SAFETY GLOVES

Wear non-slip, heavy-duty protective gloves when handling the unit.

•WEAR SAFETY FOOTWEAR

Wear non-slip safety footwear when using this equipment.

•KEEP BYSTANDERS AWAY

WARNING: Keep all bystanders, especially children and pets, at least 50 feet (15 m) from the operating area. If anyone enters the work area, stop the unit!

•THROWN OBJECTS AND ROTATING CUTTER CAN CAUSE SEVERE INJURY

WARNING: Small objects can be propelled at high speed, causing injury. Keep away from the rotating cutter.

•HOT SURFACE

WARNING: Do not touch a hot surface. You may get burned. These parts get extremely hot from operation. They remain hot for a short time after the unit is turned off.

•DO NOT USE IN THE RAIN

WARNING: Avoid dangerous environments. Never operate your unit in the rain or in damp or wet conditions. Moisture is a shock hazard.

•If the extension cord is damaged in any manner while plugged in, disconnect the extension cord from the receptacle.

•If the extension is to be used outside, the cord must be suitable for outdoor use. Any cord marked for outdoor use can also be used for indoor work. The letters “W” or “WA” on the cord jacket indicate that the cord is suitable for outdoor use.

•Make sure the extension cord is heavy enough to carry the current drawn by the unit. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. If in doubt, use the next heavier gauge cord. The smaller the gauge number, the heavier the cord.

MINIMUM WIRE SIZE FOR EXTENSION CORDS

FOR 120 VOLT APPLIANCES USING 0-6 AMPS

Cord Length (feet)	25

Wire Size (AWG)	18

•DOUBLE INSULATED

Two systems of insulation are provided instead of grounding. There is no grounding provided and no means of grounding should be added to the unit.

SAVE THESE INSTRUCTIONS

•A nameplate on your unit indicates the voltage used. Never connect the unit to an AC voltage that differs from this voltage.

•Ground Fault Circuit Interrupter (GFCI) protection should be provided on the circuit(s) or outlet(s) that will be used with the unit. For an extra measure of safety, use receptacles with built-in GFCI protection.

MAINTENANCE AND STORAGE SAFETY

•DO NOT perform maintenance procedures other than those described in this manual. Do not attempt to repair; there are no user serviceable parts inside.

•If the unit is not working as it should, has been dropped, damaged, left outdoors or dropped into water, do not use the unit.

•All service, other than the maintenance procedures described in this manual, should be performed by an authorized service center.

•Follow all maintenance instructions in this manual.

•Before inspecting, servicing, cleaning, storing, transporting or replacing any parts on the unit:

1.Stop the motor. Make sure the lock-off button is in the locked or OFF position.

2.Make sure all moving parts have stopped.

3.Remove the battery.

4.Allow the unit to cool.

•Never remove, modify or make inoperative any safety device furnished with the unit.

•Frequently inspect the unit for damage. Before further use, any damaged part should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, fuel leaks and any other conditions that may affect its operation. Damaged parts should be properly repaired or replaced by an authorized service center, unless otherwise indicated in this manual.

•If the unit starts to vibrate abnormally, stop the motor, remove the battery and allow the unit to cool. Then inspect the unit for the cause of the vibration. Vibration is generally an indicator of trouble.

•Use only original manufacturer replacement parts and accessories, which are designed specifically to enhance the performance and maximize the safe operation of the product. Failure to do so may cause poor performance and possible injury.

•Remove the battery from the unit when not in use.

•Be sure to secure the unit while transporting.

•When not in use, store the unit indoors in a locked-up and dry, or high and dry, place to prevent unauthorized use or damage. Keep out of the reach of children.

•Keep the handles dry, clean and free from debris, oil and grease. Clean the unit after each use. Never douse or spray the unit with water or any other liquid. Do not wash the unit with a hose; avoid getting water in the motor and electrical connections. Do not use solvents or strong detergents.

TB60AF specifications

The Troy-Bilt TB60AF is a versatile and efficient addition to any outdoor maintenance toolkit. Designed for homeowners who value power and ease of use, this gas-powered string trimmer is engineered to tackle a variety of yard tasks, from trimming grass to tackling overgrown weeds and brush.

One of the standout features of the TB60AF is its dependable 60cc 2-cycle engine, which provides ample power for various tasks. This powerful engine enables users to complete yard work quickly and efficiently, even in more challenging conditions. Its lightweight design, coupled with a balanced structure, ensures that users can maneuver it comfortably during extended use without excessive fatigue.

The TB60AF utilizes a 17-inch cutting swath, allowing for a wider trimming area and reducing the time spent on yard work. This increased cutting width is ideal for managing larger sections of grass and weeds with less effort than traditional, narrower trimmers. Additionally, the trimmer features the JumpStart technology, which provides an easy starting experience. This system significantly reduces the hassle of starting the engine, making it more accessible for users who may struggle with traditional starting methods.

Another important aspect of the TB60AF is its innovative Smart Start technology. This feature is designed to reduce the amount of pull force needed to start the engine, ensuring a smooth start every time. Coupled with easy-to-replace trimmer line, maintenance and operation are straightforward, making it an attractive choice for novices and seasoned users alike.

The adjustable handle design of the TB60AF enhances comfort and control during operation. Users can personalize the handle's position for better ergonomics, which can be especially beneficial when navigating around obstacles or working in tight spaces.

In terms of durability, the TB60AF is built with high-quality materials designed to withstand the rigors of outdoor use. The robust construction helps ensure longevity, allowing homeowners to depend on it season after season.

In summary, the Troy-Bilt TB60AF is an exceptional choice for those seeking a reliable and efficient string trimmer. With its powerful 60cc engine, wide cutting swath, user-friendly technologies, and ergonomic design, it stands out as a top contender for anyone looking to maintain a beautiful yard with ease and precision.