SAFETY
For Your Own Safety Read Instruction Manual
Before Operating This Equipment
The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words which are intended to convey the level of importance of the safety messages. The progres- sion of symbols is described below. Remember that safety messages by them- selves do not eliminate danger and are not a substitute for proper accident pre- vention measures.
Indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury.
|
|
| Indicates a potentially hazardous situation which, if | |
|
|
| ||
|
|
| not avoided, COULD result in death or serious injury. | |
|
|
| Indicates a potentially hazardous situation which, if | |
|
|
| ||
|
|
| ||
|
|
| not avoided, MAY result in minor or moderate injury. | |
|
|
| It may also be used to alert against unsafe practices. | |
NOTICE | ||||
| ||||
This symbol is used to alert the user to useful infor- | ||||
mation about proper operation of the equipment. | ||||
|
|
|
| |
Safety Instructions For Power Tools
1.KEEP ALL SAFETY DEVICES IN PLACE and in working order.
2.REMOVE ADJUSTING KEYS AND WRENCHES. Form a habit of checking to see that keys and adjusting wrenches are removed from tool before operation.
3.KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents.
4.DO NOT USE IN DANGEROUS ENVIRONMENT. DO NOT use power tools in damp or wet loca- tions, or where any flammable or noxious fumes may exist. Keep work area well lighted.
5.KEEP CHILDREN AND VISITORS AWAY. All children and visitors should be kept a safe distance from work area.
6.WATCH FOR SHARP EDGES, this tool may produce a sharp edge on sheet metal.
7.DO NOT FORCE TOOL. It will do the job better and safer at the rate for which it was designed.
8.USE THE RIGHT TOOL. DO NOT force tool or attachment to do a job for which it was not designed.
9.DO NOT USE UNDER THE INFLU- ENCE OF DRUGS OR ALCOHOL.
H5503 14 Gauge Swivel Head Shears |