Guarantee & Guarantee Policy

If any part is found to be defective due to faulty manufacture within the guarantee period, Husqvarna Outdoor Products, through its Authorised Service Repairers will effect the repair or replacement to the customer free of charge providing:

(a)The fault is reported directly to the Authorised Repairer.

(b)Proof of purchase is provided.

(c)The fault is not caused by misuse, neglect or faulty adjust- ment by the user.

(d)The failure has not occurred through fair wear and tear.

(e)The machine has not been serviced or repaired, taken apart or tampered with by any person not authorised by Husqvarna Outdoor Products.

(f)The machine has not been used for hire.

(g)The machine is owned by the original purchaser.

(h)The machine has not been used outside of the country for which it was specified.

(i)The machine has not been used commercially.

*This guarantee is additional to, and in no way diminishes the customers statutory rights.

Failures due to the following are not covered, therefore it is important that you read the instructions contained in this Operator's Manual and under- stand how to operate and maintain your machine:

Failures not covered by guarantee

*Replacing Nylon Line.

*Failures as a result of not reporting an initial fault.

*Failures as a result of sudden impact.

*Failures as a result of not using the product in accordance with the instructions and recommendations contained in this Operator's Manual.

*Machines used for hire are not covered by this guarantee.

*The following items listed are considered as wearing parts and their life is dependent on regular maintenance and are, therefore not normally subject to a valid warranty claim: Nylon Line., Spool & Line

*Caution!

Husqvarna Outdoor Products does not accept liability under the warranty for defects caused in whole or part, directly or indirectly by the fitting of replacement parts or additional parts that are not either manufactured or approved by Husqvarna Outdoor Products, or by the machine having been modified in any way.

EC Declaration of Conformity

I, the undersigned M. Bowden of Husqvarna			I, the undersigned M. Bowden of Husqvarna		I, the undersigned M. Bowden of Husqvarna
Outdoor Products, Aycliffe Industrial Park, NEW-			Outdoor Products, Aycliffe Industrial Park, NEW-		Outdoor Products, Aycliffe Industrial Park,
TON AYCLIFFE, Co. Durham. DL5 6UP. Certify			TON AYCLIFFE, Co. Durham. DL5 6UP Certify		NEWTON AYCLIFFE, Co. Durham. DL5 6UP
that the Product:-			that a sample of the above product has been		Certify that	a sample of the above product has
Category	Battery Lawn Trimmer		tested using directive 81/1051/EEC as a guide.		been tested using ISO 5349 as a guide. The
Make	Husqvarna Outdoor		The maximum A-weighted sound pressure level		maximum weighted root mean square value of
	Products		recorded at operator position under free field semi		vibration recorded at operator’s hand position
Conforms to the specifications of Directive 2000/14/EEC			anechoic chamber conditions was :-		was:-

Type of Cutting Device....		Cutting Line		Type		GTC24A
Identification of Series		See Product Rating Label		Width of Cut		25 cm
Conformity Assesment Procedure ANNEX VI....				Speed of Rotation of Cutting Device		............... 10,000 RPM
Notified Body		Intertek., Cleeve Road, Leatherhead,
				Guaranteed sound power level		93 dB(A)
		Surrey. KT22 7SB England
				Measured Sound Power Level		92 dB(A)
Other Directives:-		98/37/EEC, 89/336/EEC
				Level		75.6 dB(A)
& applicable standards:- EN786, EN60335-1, EN60335-2-29, EN55022,
				Value		1.87 m/s2
EN61000-4-2, EN61000-4-3, EN55014-1, EN61000-3-2, EN61000-3-3,
				Weight		6.89 kg

Newton Aycliffe, 14/05/2005

M. Bowden,

Research & Development Director

Husqvarna Outdoor Products

Aycliffe Industrial Park

NEWTON AYCLIFFE

Co.Durham DL5 6UP

ENGLAND

Telephone - (00) 44 1325 300303 Fax - (00) 44 1325 310339

UK Customer Helpline - 01325 300303 Fax - 01325 310339

Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice.

5107422-01