How to trim and edge
J |
|
K | L |
| 1 |
| 2 |
M |
|
N | P |
| 1 |
| 2 |
1 |
|
Q |
|
•WARNING
•The use of eye protection is recommended.
Do not lean over the trimmer whilst trimming or edging, objects may be thrown by the cutting line. Do not allow cutting head to rest on the ground. Do not overload your trimmer.
Overloading can be avoided by making sure the motor speed does not drop unduly.
•BEFORE USE
Make sure that the cutting line is fed out.
•Make sure motor is up to full speed before trim- ming or edging.
To start your Product
1.Attach your product to the fully charged Power Pack.(J)
•The assembled product is provided with a lock- off button (K1) to prevent accidental starting.
2.To start, press
How to trim
1.Cut with nylon line at an angle using the tip. (L).
2.Swing trimmer in and out of the cutting area taking small cuts (M)
3.Line is fed out automatically every time the trimmer head stops rotating and returns to operating speed.
•Extra line can be fed out manually as described in
Manual line feed
4. To stop your trimmer release the switch lever.
How to edge
1.To convert to edging mode, press button (N1) and twist head (N2). An audible "click" will confirm that the head is locked.
2.To start, press
3.Rest product on wheel for extra stability and line up
the edge of the lawn with the two indicators on the guard (P1). Edge in direction indicated in Fig P.
4.To stop your product release the switch lever.
5.To return to trimming mode, press button and twist head back the opposite way. An audible "click" will confirm that the head is locked.
How to use your product under shrubs & bushes
1.To enable your product to be used under shrubs and
bushes, press the lever at the back of the trimmer head (Q)
2.Tilt the trimmer head to one of two positions (R)
3.To return to trimming mode, press the lever at the back of the trimmer head (Q).
R