10
Fault Finding Hints & Service Recommendations
MAINTENANCE
Fault Finding Hints
1.Line too short
Manually feed out the line.
2.Line broken inside cutting head Remove cap and
3.Line jammed on spool
Remove cap and spool and rewind line to remove crossed loops.
4.Excess line feed
Battery needs to be charged.
5.Poor performance
Ensure inside of cutting head housing is clean and free from debris.
6.Trimmer stops during use
Release switch lever and wait 30 seconds before
Service Recommendations
1.Always use genuine Flymo Spare Parts.
2.Prepacked spares are available from most Flymo/Partner stockists.
3.If you have a problem with your machine contact your local Approved Service Centre ensuring you have full details of your product as described on the product rating label.
4.Should it be necessary for work to be carried out by your Service Centre, it is important to take your complete machine with you.
5.In the event of further difficulty please contact:-
Flymo/Partner, Customer Service
Flymo/Partner
a division of Electrolux Outdoor Products
Preston Road
Aycliffe Industrial Estate,
NEWTON AYCLIFFE,
Co. Durham. |
|
DL5 6UP |
|
Telephone: | (01325) 300303 |
Fax : | (01325) 318193 |
Anetwork of specialist dealers can be found in your local Yellow Pages.
To obtain service on your Flymo product simply telephone or visit your local Service Centre.
Should you require service under the terms of our guarantee the Service Centre will require proof of purchase.
All of the centres listed stock genuine Flymo Spare Parts.
NOTE:
Our Service Repairers act on their own behalf and are not empowered to commit or legally bind Flymo/Partner in any manner whatsoever.