Poulan PPB200E Replacing the Cutting Head, Carburetor Adjustment, Remove the screwdriver

Page 13

Guide Slot

Guide

Slot

9.Insert the ends of the lines through exit holes in the sides of the cover.

10.Place the spool in the cover.

Spool

Cover

11.Make sure the lines are not caught be- tween the rim of the spool and the wall of the cover.

12.Reinstall the spool and cover onto the trimmer head. Push until cover snaps into place.

REPLACING THE CUTTING HEAD

1.Align hole in the dust cup with the hole in the side of the gearbox by rotating the dust cup.

2.Insert a small screwdriver into aligned holes. This will keep the shaft from turning while removing and installing trimmer head.

Screwdriver

3.While holding the screwdriver in position, remove trimmer head by turning clock- wise.

4.Thread replacement trimmer head onto the shaft by turning counterclockwise. Tighten until secure.

5.Remove the screwdriver.

CARBURETOR ADJUSTMENT

WARNING: Keep others away when making idle speed adjustments. The trimmer head, blade or any optional attachment will be spinning during most of this procedure. Wear your protective equipment and observe all safe- ty precautions. After making adjustments, the trimmer head, blade or any optional attachment must not move/spin at idle speed.

The carburetor has been carefully set at the factory. Adjustments may be necessary if you notice any of the following conditions:

S Engine will not idle when the throttle is released.

S The trimmer head, blade or optional attachment moves/spins at idle.

Make adjustments with the unit supported so the cutting attachment is off the ground and will not make contact with any object. Hold the unit by hand while running and making ad- justments. Keep all parts of your body away from the cutting attachment and muffler.

Idle Speed Adjustment

Allow engine to idle. Adjust speed until engine runs without trimmer head, blade or optional attachment moving or spinning (idle too fast) or stalling (idle speed too slow).

S Turn idle speed screw clockwise to increase engine speed if engine stalls or dies.

STurn idle speed screw counterclockwise to decrease engine speed if trimmer head, blade or optional attachment moves or spins at idle.

WARNING: Recheck the idle speed after each adjustment. The trimmer head, blade or optional attachment must not move or spin at idle speed to avoid serious injury to the operator or others.

Air Filter Cover

Idle Speed Screw

If you require further assistance or are unsure about performing this procedure, contact an

authorized

service dealer or call

1--

800--

554--

6723.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents PPB200E Operator Safety Safety RulesUL Classified Product Notice Fuel Safety Unit / Maintenance SafetyLine Trimmer Safety Additional Safety RulesBLOWER/VACUUM Safety Edger SafetyBrushcutter Safety Hedge Trimmer Safety Cultivator SafetyPole Pruner Safety Proboscis noseHigh speed causing injury Snow Thrower SafetyKnow how to stop quickly Keep the rotor clear of debrisInstalling Trimmer ATTACH- Ment AssemblyAdjusting the Handle Attaching the ShieldOperation Installing Optional ATTACH- Ments HOW to Start Your UnitStarting a Cold Engine Starting a Warm EngineTrimmer Line Advance Operating PositionCutting Methods Hearing ProtectionCheck for Loose Fasteners and Parts MaintenanceCheck for Damaged or Worn Parts Service and Adjustments Authorized Service dealer or call Carburetor AdjustmentReplacing the Cutting Head Remove the screwdriverFuel System Seasonal StorageEngine OtherTroubleshooting Table Cause Remedy Ligations The U.S. Environmental Limited WarrantyIntermediate 125 hours Extended 300 hours

PPB200E, 545137274 specifications

The Poulan 545137274 is a versatile and reliable outdoor power equipment product designed for both homeowners and professionals alike. The PPB200E model is particularly noteworthy, as it embodies a combination of power, efficiency, and user-friendly features, making it ideal for a variety of tasks, from routine yard maintenance to more demanding landscaping projects.

One of the key features of the Poulan 545137274 PPB200E is its robust engine. Equipped with a powerful 2-cycle engine, it delivers the necessary power for effective pruning, trimming, and cutting. This engine not only provides ample horsepower but also ensures smooth operation, allowing users to tackle tough jobs with ease. The lightweight design of the unit enhances maneuverability, making it easier for users to navigate through various terrains and reach those hard-to-reach areas without any hassle.

In addition to its powerful engine, the PPB200E incorporates advanced technology for improved performance. The product features an automatic oiling system, which keeps the chain lubricated during operation, thereby minimizing wear and prolonging the life of the equipment. This system also reduces the maintenance required by users, allowing them to focus more on their tasks rather than upkeep.

The Poulan 545137274 model also emphasizes user comfort and ease of use. Its ergonomic handle is designed to reduce fatigue, allowing for extended periods of use without strain. The adjustable handle design further adds to this comfort, enabling users to customize the grip according to their preferences.

Safety is another essential characteristic of this model. It includes a chain brake that automatically activates when kickback occurs, providing an additional layer of protection for the user. This feature is particularly crucial for beginners and those unfamiliar with handling power equipment, as it helps prevent potential accidents.

Overall, the Poulan 545137274 PPB200E combines power, technology, comfort, and safety, making it an excellent choice for anyone in need of a reliable and efficient outdoor tool. Whether it's for personal use or professional landscaping, this model delivers exceptional performance while ensuring user-friendly operation. Its solid build quality and advanced features make the PPB200E a dependable companion for any outdoor project.
Top Page Image Contents