Poulan PPB200E, 545137274 HOW to Start Your Unit, Starting a Cold Engine, Starting a Warm Engine

Page 9

ON/OFF Switch

HOW TO START YOUR UNIT

WARNING: Avoid any contact with the muffler. A hot muffler can cause serious burns.

Starting Position

HELPFUL TIP

If your engine still does not start after following these instructions, please call 1-800-554-6723.

STARTING A COLD ENGINE

NOTE: DO NOT squeeze the throttle trigger until the engine has started and runs.

1.Set unit on a flat surface.

2.Move ON/OFF switch to the ON position.

3.Slowly press the primer bulb 6 times.

4.Move the start lever to the START posi- tion.

Starter Handle

Start

Lever

Primer Bulb

Muffler

5.Pull starter rope handle sharply until en- gine starts and runs.

6.Allow unit to run for 5 seconds, then fully squeeze the throttle trigger to disengage the starting system.

STARTING A WARM ENGINE

1.Move ON/OFF switch to the ON position.

2.Squeeze and hold the throttle trigger. Keep throttle trigger fully squeezed until engine runs smoothly.

3.Pull starter rope sharply while squeezing throttle trigger until engine runs.

NOTE: Normally, the warm starting proce- dure can be used within 5--10 minutes after the unit is turned OFF. If the unit sits for more than 10 minutes without being ran, it will be necessary to start the unit by following the steps under STARTING A COLD ENGINE or following the starting instruction steps shown on the unit.

STARTING A FLOODED ENGINE

Flooded engines can be started by placing the ON/OFF switch in the ON position. Move the start lever to the RUN position and fully squeeze throttle trigger. Pull the starter han- dle repeatedly while squeezing throttle trigger until engine starts and runs. This could re- quire pulling the starter handle many times, depending on how badly the unit is flooded. If the unit still doesn’t start, refer to TROUBLESHOOTING TABLE or call 1-800-554-6723.

OPERATING THE COUPLER

This model is equipped with a coupler which enables optional attachments to be installed. The optional attachments are:

MODEL:

Edger . . . . . . . . . . . . . . . . . . . . . PPB1000E Cultivator . . . . . . . . . . . . . . . . . . PPB2000T Blower . . . . . . . . . . . . . . . . . . . . PPB3000B Brushcutter . . . . . . . . . . . . . . . . PPB4000C Pruner . . . . . . . . . . . . . . . . . . . . PP5000P

WARNING: Always stop unit and dis- connect spark plug before removing or instal- ling attachments.

REMOVING TRIMMER ATTACH- MENT (OR OTHER OPTIONAL ATTACHMENTS)

CAUTION: When removing or installing at- tachments, place the unit on a flat surface for stability.

1.Loosen the coupler by turning the knob counterclockwise.

 

Upper

Coupler

Shaft

Lower

LOOSEN

 

Attachment

 

TIGHTEN

Knob

2.Press and hold the locking/release button. Locking/Release

Button

Coupler

Upper Shaft

Lower Attachment

 

3.While securely holding the engine and upper shaft, pull the attachment straight out of the coupler.

INSTALLING OPTIONAL ATTACH- MENTS

1.Remove the shaft cap from the attach- ment (if present).

2.Position locking/release button of attach- ment into guide recess of coupler.

3.Push the attachment into the coupler until the locking/release button snaps into the primary hole.

4.Before using the unit, tighten the knob se- curely by turning clockwise.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents PPB200E Safety Rules Operator SafetyUL Classified Product Notice Fuel Safety Unit / Maintenance SafetyLine Trimmer Safety Additional Safety RulesEdger Safety BLOWER/VACUUM SafetyBrushcutter Safety Hedge Trimmer Safety Cultivator SafetyPole Pruner Safety Proboscis noseHigh speed causing injury Snow Thrower SafetyKnow how to stop quickly Keep the rotor clear of debrisInstalling Trimmer ATTACH- Ment AssemblyAdjusting the Handle Attaching the ShieldOperation Installing Optional ATTACH- Ments HOW to Start Your UnitStarting a Cold Engine Starting a Warm EngineTrimmer Line Advance Operating PositionCutting Methods Hearing ProtectionMaintenance Check for Loose Fasteners and PartsCheck for Damaged or Worn Parts Service and Adjustments Authorized Service dealer or call Carburetor AdjustmentReplacing the Cutting Head Remove the screwdriverFuel System Seasonal StorageEngine OtherTroubleshooting Table Cause Remedy Ligations The U.S. Environmental Limited WarrantyIntermediate 125 hours Extended 300 hours

PPB200E, 545137274 specifications

The Poulan 545137274 is a versatile and reliable outdoor power equipment product designed for both homeowners and professionals alike. The PPB200E model is particularly noteworthy, as it embodies a combination of power, efficiency, and user-friendly features, making it ideal for a variety of tasks, from routine yard maintenance to more demanding landscaping projects.

One of the key features of the Poulan 545137274 PPB200E is its robust engine. Equipped with a powerful 2-cycle engine, it delivers the necessary power for effective pruning, trimming, and cutting. This engine not only provides ample horsepower but also ensures smooth operation, allowing users to tackle tough jobs with ease. The lightweight design of the unit enhances maneuverability, making it easier for users to navigate through various terrains and reach those hard-to-reach areas without any hassle.

In addition to its powerful engine, the PPB200E incorporates advanced technology for improved performance. The product features an automatic oiling system, which keeps the chain lubricated during operation, thereby minimizing wear and prolonging the life of the equipment. This system also reduces the maintenance required by users, allowing them to focus more on their tasks rather than upkeep.

The Poulan 545137274 model also emphasizes user comfort and ease of use. Its ergonomic handle is designed to reduce fatigue, allowing for extended periods of use without strain. The adjustable handle design further adds to this comfort, enabling users to customize the grip according to their preferences.

Safety is another essential characteristic of this model. It includes a chain brake that automatically activates when kickback occurs, providing an additional layer of protection for the user. This feature is particularly crucial for beginners and those unfamiliar with handling power equipment, as it helps prevent potential accidents.

Overall, the Poulan 545137274 PPB200E combines power, technology, comfort, and safety, making it an excellent choice for anyone in need of a reliable and efficient outdoor tool. Whether it's for personal use or professional landscaping, this model delivers exceptional performance while ensuring user-friendly operation. Its solid build quality and advanced features make the PPB200E a dependable companion for any outdoor project.
Top Page Image Contents