Poulan PPB200E, 545137274 Assembly, Installing Trimmer ATTACH- Ment, Attaching the Shield

Page 7

ASSEMBLY

WARNING: If received assembled, repeat all steps to ensure your unit is properly assembled and all fasteners are secure.

Examine parts for damage. Do not use dam- aged parts.

NOTE: If you need assistance or find parts missing or damaged, call 1-800-554-6723. It is normal for the fuel filter to rattle in the empty fuel tank.

Finding fuel or oil residue on muffler is normal due to carburetor adjustments and testing done by the manufacturer.

INSTALLING TRIMMER ATTACH- MENT

CAUTION: When installing trimmer attach- ment, place the unit on a flat surface for stabil- ity.

1.Loosen the coupler by turning the knob counterclockwise.

Coupler

LOOSEN

Secondary Hole

Locking/Release Button in Primary Hole

For optional attachments, see the ASSEMBLY section of the applicable attachment instruction manual.

ATTACHING THE SHIELD

WARNING: The shield must be prop- erly installed. The shield provides partial protec- tion from the risk of thrown objects to the opera- tor and others and is equipped with a line limiter blade which cuts excess line to the proper length. The line limiter blade (on underside of shield) is sharp and can cut you.

Shipping protector

TIGHTEN

Knob

For proper orientation of shield, see KNOW YOUR TRIMMER illustration in OPERATION section.

1.

Remove wing nut from shield.

2.

Insert bracket into slot as shown.

3.

Pivot shield until bolt passes through hole in

 

bracket.

4.

Securely tighten wing nut onto bolt.

2.Remove shipping protector from coupler.

3.Remove the shaft cap from the trimmer at- tachment (if present).

4.Position locking/release button of attach- ment into guide recess of coupler.

5.Push the attachment into the coupler until the locking/release button snaps into the primary hole.

6.Before using the unit, tighten the knob se- curely by turning clockwise.

Bracket

Slot

Wing Nut

Coupler

Primary Hole

 

Guide Recess

Shield

Gearbox

Upper

Locking/

Lower

Release

Shaft

Attachment

 

Button

 

WARNING: Make sure the locking/ release button is locked in the primary hole and the knob is securely tightened before op- erating the unit. All attachments are designed to be used in the primary hole unless otherwise stated in the applicable attachment instruction manual. Using the wrong hole could lead to seri- ous injury or damage to the unit.

ADJUSTING THE HANDLE

WARNING: When adjusting the han- dle, be sure it remains above the safety label and below the mark or arrow on the shaft.

1.Loosen wing nut on handle.

2.Rotate the handle on the shaft to an up- right position; retighten wing nut.

7

Image 7
Contents PPB200E Operator Safety Safety RulesUL Classified Product Notice Additional Safety Rules Unit / Maintenance SafetyFuel Safety Line Trimmer SafetyBLOWER/VACUUM Safety Edger SafetyBrushcutter Safety Proboscis nose Cultivator SafetyHedge Trimmer Safety Pole Pruner SafetyKeep the rotor clear of debris Snow Thrower SafetyHigh speed causing injury Know how to stop quicklyAttaching the Shield AssemblyInstalling Trimmer ATTACH- Ment Adjusting the HandleOperation Starting a Warm Engine HOW to Start Your UnitInstalling Optional ATTACH- Ments Starting a Cold EngineHearing Protection Operating PositionTrimmer Line Advance Cutting MethodsCheck for Loose Fasteners and Parts MaintenanceCheck for Damaged or Worn Parts Service and Adjustments Remove the screwdriver Carburetor AdjustmentAuthorized Service dealer or call Replacing the Cutting HeadOther Seasonal StorageFuel System EngineTroubleshooting Table Cause Remedy Ligations The U.S. Environmental Limited WarrantyIntermediate 125 hours Extended 300 hours

PPB200E, 545137274 specifications

The Poulan 545137274 is a versatile and reliable outdoor power equipment product designed for both homeowners and professionals alike. The PPB200E model is particularly noteworthy, as it embodies a combination of power, efficiency, and user-friendly features, making it ideal for a variety of tasks, from routine yard maintenance to more demanding landscaping projects.

One of the key features of the Poulan 545137274 PPB200E is its robust engine. Equipped with a powerful 2-cycle engine, it delivers the necessary power for effective pruning, trimming, and cutting. This engine not only provides ample horsepower but also ensures smooth operation, allowing users to tackle tough jobs with ease. The lightweight design of the unit enhances maneuverability, making it easier for users to navigate through various terrains and reach those hard-to-reach areas without any hassle.

In addition to its powerful engine, the PPB200E incorporates advanced technology for improved performance. The product features an automatic oiling system, which keeps the chain lubricated during operation, thereby minimizing wear and prolonging the life of the equipment. This system also reduces the maintenance required by users, allowing them to focus more on their tasks rather than upkeep.

The Poulan 545137274 model also emphasizes user comfort and ease of use. Its ergonomic handle is designed to reduce fatigue, allowing for extended periods of use without strain. The adjustable handle design further adds to this comfort, enabling users to customize the grip according to their preferences.

Safety is another essential characteristic of this model. It includes a chain brake that automatically activates when kickback occurs, providing an additional layer of protection for the user. This feature is particularly crucial for beginners and those unfamiliar with handling power equipment, as it helps prevent potential accidents.

Overall, the Poulan 545137274 PPB200E combines power, technology, comfort, and safety, making it an excellent choice for anyone in need of a reliable and efficient outdoor tool. Whether it's for personal use or professional landscaping, this model delivers exceptional performance while ensuring user-friendly operation. Its solid build quality and advanced features make the PPB200E a dependable companion for any outdoor project.