OPERATION
KNOW YOUR HEDGE TRIMMER ATTACHMENT
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR HEDGE TRIMMER ATTACHMENT. Compare the illustrations with your attachment to familiarize yourself with the location of the various controls and adjustments. Save this manual for future refer- ence.
Angle Adjustment Track
Fixed Screw
Blade | Angle |
| Adjustment |
| Holder |
| Shaft | |
BLADE | ANGLE ADJUSTMENT HOLDER | |
The BLADE is designed to cut hedges. | The ANGLE ADJUSTMENT HOLDER is | |
| used to adjust the angle of the hedge trimmer | |
| to suit the area you are trimming. | |
|
|
|
OPERATING THE COUPLER
Your powerhead is equipped with a coupler which enables optional attachments to be
Upper Shaft
Coupler
installed. The optional attachments are:
MODEL:
Lower
LOOSEN
Edger . . . . . . . . . . . . . . . . . . . . . PP1000E Cultivator . . . . . . . . . . . . . . . . . . PP2000T Blower . . . . . . . . . . . . . . . . . . . . PP3000B Pruner . . . . . . . . . . . . . . . . . . . . PP5000P Pruner . . . . . . . . . . . . . . . . . . . . PP5500P Brushcutter* . . . . . . . . . . . . . . . PP4000C *not designed for use with electric powerheads
WARNING: Always disconnect pow- erhead spark plug (or disconnect powerhead from power source) before removing or instal- ling attachments.
REMOVING ATTACHMENT CAUTION: When removing or installing at- tachments, place the powerhead and attach- ment on a flat surface for stability.
1.Loosen the coupler by turning the knob counterclockwise.
Attachment
TIGHTEN Knob
2.Press and hold the locking/release button.
Locking/Release Button
Coupler | Upper Shaft | |
Lower Attachment | ||
|
3.While securely holding the upper shaft, pull the attachment straight out of the cou- pler.
5