Poulan P3500, 545154718 Starting a Warm Engine, Starting a Flooded Engine, Operating Position

Page 7

Primer Bulb

Choke

Lever

Starter Handle

5.Pull starter rope handle sharply until engine sounds as if it is trying to start, but do not pull rope more than 6 times.

6.As soon as engine sounds as if it is trying to start, move choke lever to HALF CHOKE position.

7.Pull starter rope sharply until engine runs, but no more than 6 pulls.

NOTE: If the engine doesn’t start after 6 pulls (at the HALF CHOKE position), move the choke lever to the FULL CHOKE position and press the primer bulb 6 times. Squeeze and hold the throttle trigger and pull the starter rope 2 more times. Move the choke lever to the HALF CHOKE position and pull the start- er rope until the engine runs, but no more than 6 pulls. If the engine still doesn’t start, it is probably flooded. Proceed to

STARTING A FLOODED ENGINE.

8.Once the engine starts, allow it to run 10 se- conds, then move the choke lever to the RUN position. Allow the unit to run for 30 more seconds at RUN before releasing the throttle trigger.

NOTE: If engine dies with the choke le- ver in the RUN position, move the choke lever to the HALF CHOKE position and pull the rope until engine runs, but no more than 6 pulls.

STARTING A WARM ENGINE

1.Move the choke lever to the HALF CHOKE position.

2.Squeeze and hold the throttle trigger. Keep throttle trigger fully squeezed until the en- gine runs smoothly.

3.Pull starter rope sharply until engine runs, but no more than 6 pulls.

4.Allow engine to run 15 seconds, then move the choke lever to RUN.

NOTE: If engine has not started, pull starter rope 5 more pulls. If engine still does not run, it is probably flooded.

STARTING A FLOODED ENGINE

Flooded engines can be started by placing the choke lever in the RUN position; then, pull the rope to clear the engine of excess fuel. This could require pulling the starter handle many times depending on how badly the unit is flooded.

If the unit still doesn’t start, refer to TROUBLESHOOTING TABLE or call 1-800-554-6723.

OPERATING INSTRUCTIONS

It is recommended that the engine not be operated for longer than 1 minute at full throttle.

OPERATING POSITION

ALWAYS WEAR:

Eye protection

Long pants

Heavy shoes

Cut from your right to your left.

WARNING: Always wear eye protec- tion. Never lean over the trimmer head. Rocks or debris can ricochet or be thrown into eyes and face and cause blindness or other serious injury.

Do not run the engine at a higher speed than necessary. The cutting line will cut efficiently when the engine is run at less than full throttle. At lower speeds, there is less engine noise and vibration. The cutting line will last longer and will be less likely to “weld” onto the spool.

Always release the throttle trigger and allow the engine to return to idle speed when not cutting. To stop engine:

SRelease the throttle trigger.

S Push and hold the STOP switch in the STOP position until the engine stops.

TWIST AND EDGE

The Twist and Edge feature allows for easy edging of sidewalks, patios, driveways, etc.

1.Pull the tab toward the engine.

2.Twist the shaft to the edging position; re- lease tab.

Tab

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Manual de Instrucciones Manuel d’Instructions Identification of Safety Symbols Operator Safety Safety RulesTransporting and Storage Unit / Maintenance SafetyFuel Safety Cutting SafetyAttaching Shield AssemblyAdjusting the Assist Handle OperationPrimer Bulb Stop SwitchHOW to Stop Your Unit HOW to Start Your UnitTwist and Edge Starting a Warm EngineStarting a Flooded Engine Operating PositionDoes The Cutting Work Area Trimmer Line AdvanceCutting Methods Tip of the LineMaintenance Carburetor Idle Speed Adjustment Service and AdjustmentsLine Replacement Installing Spool with LineOther Seasonal StorageFuel System EngineTroubleshooting Table Cause Remedy Canada, contact Limited WarrantyReplacement and Repair of Emis

P3500, 545154718 specifications

The Poulan 545154718, P3500 is a powerful and versatile chainsaw designed for both residential and professional use. This model is well-known for its reliability and efficiency, making it a popular choice among homeowners, landscapers, and tree care professionals alike.

One of the standout features of the P3500 is its robust 50cc engine. This engine delivers ample power to tackle a wide range of cutting tasks, from trimming branches to felling medium-sized trees. The design of the engine not only ensures high performance but also offers easy starting capabilities, reducing the hassle for the user, especially in colder conditions or after extended periods of inactivity.

In terms of cutting performance, the Poulan P3500 is equipped with a 20-inch bar and chain, providing an ideal balance between cutting capacity and control. This length allows the user to efficiently cut through thicker logs while maintaining precision for smaller cuts. The chain itself is designed for durability, ensuring that it remains sharp and effective over time, which contributes to a smoother cutting experience.

The overall ergonomics of the design make the P3500 user-friendly. It features a lightweight construction, which helps reduce operator fatigue during extended use. The innovative handle design provides a comfortable grip, enhancing control and stability during cutting operations. Additionally, the chainsaw is equipped with anti-vibration technology, which further minimizes fatigue and allows for longer, more comfortable use.

Safety is a crucial aspect of any chainsaw, and the Poulan P3500 does not disappoint. It includes several safety features such as a chain brake and a throttle lock-out, ensuring that the user can operate the tool safely. The accessible air filter and fuel tank make maintenance easy, allowing users to keep their chainsaw in optimal condition with minimal effort.

Furthermore, the Poulan P3500 is designed with easy-to-use adjustments for chain tensioning, ensuring that the chain can be tightened or loosened without the need for additional tools. This feature enhances the convenience of the chainsaw, making it simpler for users to perform routine maintenance.

In conclusion, the Poulan 545154718, P3500 is a well-rounded chainsaw that delivers power, comfort, and safety in one package. With its features tailored for both novice and experienced users, it stands out as a reliable tool for anyone looking to manage their cutting tasks effectively. Whether you are pruning trees or tackling larger landscaping projects, the P3500 is engineered to meet your needs with performance and efficiency.
Top Page Image Contents