Poulan 545146926 Maintenance, Check for Loose Fasteners and Parts, Clean AIR Filter

Page 11

SFor mowing or sweeping, use full throttle for a good clean job.

TRIMMING -- Hold the bottom of the trimmer head about 3 inches (8 cm) above the ground and at an angle. Allow only the tip of the line to make contact. Do not force trimmer line into work area.

Trimming

3 inches (8 cm) above ground

SCALPING -- The scalping technique re- moves unwanted vegetation down to the ground. Hold the bottom of the trimmer head about 3 inches (8 cm) above the ground and at an angle. Allow the tip of the line to strike the ground around trees, posts, monuments, etc. This technique increases line wear.

Scalping

MOWING -- Your trimmer is ideal for mowing in places conventional lawn mowers cannot reach. In the mowing position, keep the line parallel to the ground. Avoid pressing the head into the ground as this can scalp the ground and damage the tool.

Mowing

SWEEPING -- The fanning action of the rotat- ing line can be used for a quick and easy clean up. Keep the line parallel to and above the surfaces being swept and move the tool from side to side.

Sweeping

MAINTENANCE

WARNING: Disconnect the spark plug before performing maintenance except for carburetor adjustments.

HELPFUL TIP

IMPORTANT: Have all

repairs other than the rec- ommended maintenance described in the instruction manual performed by an authorized service dealer.

If any dealer other than an authorized service dealer performs work on the product, Poulan PRO may not pay for repairs under warranty. It is your re- sponsibility to maintain and perform general maintenance.

CHECK FOR LOOSE

FASTENERS AND PARTS

SSpark Plug Boot S Air Filter

S Housing Screws

S Assist Handle Screw S Debris Shield

CHECK FOR DAMAGED OR WORN PARTS

Contact an authorized service dealer for re- placement of damaged or worn parts.

S ON/OFF Switch -- Ensure ON/OFF switch functions properly by moving the switch to the OFF position. Make sure engine stops; then restart engine and continue.

SFuel Tank -- Discontinue use of unit if fuel tank shows signs of damage or leaks.

SDebris Shield -- Discontinue use of unit if debris shield is damaged.

INSPECT AND CLEAN UNIT AND LABELS

SAfter each use, inspect complete unit for loose or damaged parts. Clean the unit and labels using a damp cloth with a mild deter- gent.

SWipe off unit with a clean dry cloth.

CLEAN AIR FILTER

A dirty air filter decreases engine perform- ance and increases fuel consumption and harmful emissions. Always clean after every 5 hours of operation.

1.Clean the cover and the area around it to keep dirt from falling into the carburetor chamber when the cover is removed.

2.Remove parts by pressing button to re-

lease air filter cover.

NOTE: To avoid creating a fire hazard or producing harmful evaporative emissions, do not clean filter in gasoline or other flammable solvent.

3.Wash the filter in soap and water.

4.Allow filter to dry.

5.Replace parts.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents PPB150E UL Classified Product Notice Safety RulesOperator Safety Transporting and Storage Unit / Maintenance SafetyFuel Safety Line Trimmer SafetyAlways use the handlebar when using edg- er attachment Edger SafetyBLOWER/VACUUM Safety Brushcutter SafetyProboscis nose Cultivator SafetyHedge Trimmer Safety Pole Pruner SafetySnow Thrower Safety Attaching Shield AssemblyInstalling Trimmer ATTACH- Ment Adjusting the Assist HandleOperation Starting a Flooded Engine HOW to Start Your UnitInstalling Optional ATTACH- Ments Starting a Cold EngineSecondary Hole Locking/Release Button in Primary Hole Operating PositionTrimmer Line Advance Cutting MethodsCheck for Loose Fasteners and Parts MaintenanceInspect and Clean Unit and Labels Clean AIR FilterReplace Spark Plug Service and AdjustmentsCarburetor Adjustment Muffler and Spark ARREST- ING ScreenOther Seasonal StorageFuel System EngineTroubleshooting Table Cause Remedy Ligations The U.S. Environmental Limited WarrantyIntermediate 125 hours Extended 300 hours

545146926 specifications

The Poulan 545146926 is a powerful and versatile chainsaw designed for both professional and home use. Known for its robust performance and user-friendly features, this model offers an array of specifications that cater to various cutting tasks, from trimming branches to felling trees.

One of the standout features of the Poulan 545146926 is its efficient engine. The chainsaw is powered by a reliable 50cc two-cycle engine, which delivers ample power while maintaining fuel efficiency. This balance makes it suitable for extended use without the constant need for refueling. Additionally, the engine's design minimizes emissions, allowing for a more environmentally friendly operation, in keeping with modern standards.

The chainsaw is equipped with a 20-inch bar and chain, offering an optimal cutting length for a wide range of applications. This extended reach allows the user to tackle larger trees and thick branches with ease, making the Poulan 545146926 an excellent choice for both professional loggers and homeowners with extensive landscaping needs.

Safety is a priority in the design of the Poulan 545146926. The chainsaw features several safety mechanisms, including a chain brake that activates in the event of a kickback, reducing the risk of injury during operation. Furthermore, the comfortable handle design aids in reducing vibrations, which makes for a smoother cutting experience, minimizing fatigue during longer projects.

Another notable technology featured in this chainsaw is its easy-start system. This mechanism reduces the effort required to start the engine, allowing users to get to work quickly without struggling with traditional pull-start engines. The improved air filtration system further enhances performance, ensuring the engine operates smoothly and efficiently by keeping dirt and debris at bay.

In terms of maintenance, the Poulan 545146926 is designed for ease of use. Its tool-less chain tensioning system simplifies adjustments, allowing users to maintain optimal chain tension effortlessly. Additionally, the easy-access air filter and fuel cap streamline routine checks, making it convenient for users to keep their chainsaw in top working condition.

In summary, the Poulan 545146926 combines power, safety, and user-friendly features, making it an ideal choice for anyone needing a reliable chainsaw for various cutting tasks. Its advanced technology, efficient design, and focus on safety provide a comprehensive solution for both amateur and seasoned users.
Top Page Image Contents