Poulan 545146926 instruction manual Seasonal Storage, Fuel System, Engine, Other

Page 13

S Engine will not idle when the throttle is released.

S The trimmer head or any optional attachment moves/spins at idle.

Make adjustments with the unit supported so the cutting attachment is off the ground and will not make contact with any object. Hold the unit by hand while running and making ad- justments. Keep all parts of your body away from the cutting attachment and muffler.

Idle Speed Adjustment

Allow engine to idle. Adjust speed until engine runs without trimmer head or any optional at- tachment moving or spinning (idle too fast) or engine stalling (idle speed too slow).

S Turn idle speed screw clockwise to increase engine speed if engine stalls or dies.

STurn idle speed screw counterclockwise to decrease engine speed if trimmer head or any optional attachment moves or spins at idle.

WARNING: Recheck the idle speed after each adjustment. The trimmer head or any optional attachment must not move or spin at idle speed to avoid serious injury to the operator or others.

Air Filter

Cover

Idle Speed

Screw

If you require further assistance or are unsure about performing this procedure, contact an authorized service dealer or call 1--800--554--6723.

STORAGE

WARNING: Perform the following steps after each use:

SAllow engine to cool before storing or trans-

porting.

SStore unit and fuel in a well ventilated area where fuel vapors cannot reach sparks or open flames from water heaters, electric

motors or switches, furnaces, etc.

SStore unit with all guards in place. Position unit so that any sharp object cannot acci-

dentally cause injury.

SStore unit and fuel well out of the reach of children.

SEASONAL STORAGE

Prepare unit for storage at end of season or if it will not be used for 30 days or more.

If your unit is to be stored for a period of time: S Clean the entire unit before lengthy

storage.

SStore in a clean dry area.

SLightly oil external metal surfaces.

FUEL SYSTEM

Under FUELING ENGINE in the OPERA- TION section of this manual, see message la- beled IMPORTANT regarding the use of ga- sohol in your engine.

Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to the gasoline in the fuel tank or fuel storage container. Fol- low the mix instructions found on stabilizer container. Run engine at least 5 minutes after adding stabilizer.

HELPFUL TIP

During storage of your gas/ oil mixture, the oil will sepa- rate from the gas.

We recommend that you shake the gas can weekly to insure proper blending of the gas and oil.

ENGINE

SRemove spark plug and pour 1 teaspoon of 40:1, 2-cycle engine oil (air cooled) through the spark plug opening. Slowly pull the

starter rope 8 to 10 times to distribute oil.

SReplace spark plug with new one of recom-

mended type and heat range.

SClean air filter.

S Check entire unit for loose screws, nuts, and bolts. Replace any damaged, broken, or worn parts.

SAt the beginning of the next season, use only fresh fuel having the proper gasoline to oil ratio.

OTHER

SDo not store gasoline from one season to another.

SReplace your gasoline can if it starts to rust.

13

Image 13
Contents PPB150E Operator Safety Safety RulesUL Classified Product Notice Fuel Safety Unit / Maintenance SafetyLine Trimmer Safety Transporting and StorageBLOWER/VACUUM Safety Edger SafetyBrushcutter Safety Always use the handlebar when using edg- er attachmentHedge Trimmer Safety Cultivator SafetyPole Pruner Safety Proboscis noseSnow Thrower Safety Installing Trimmer ATTACH- Ment AssemblyAdjusting the Assist Handle Attaching ShieldOperation Installing Optional ATTACH- Ments HOW to Start Your UnitStarting a Cold Engine Starting a Flooded EngineTrimmer Line Advance Operating PositionCutting Methods Secondary Hole Locking/Release Button in Primary HoleInspect and Clean Unit and Labels MaintenanceClean AIR Filter Check for Loose Fasteners and PartsCarburetor Adjustment Service and AdjustmentsMuffler and Spark ARREST- ING Screen Replace Spark PlugFuel System Seasonal StorageEngine OtherTroubleshooting Table Cause Remedy Ligations The U.S. Environmental Limited WarrantyIntermediate 125 hours Extended 300 hours

545146926 specifications

The Poulan 545146926 is a powerful and versatile chainsaw designed for both professional and home use. Known for its robust performance and user-friendly features, this model offers an array of specifications that cater to various cutting tasks, from trimming branches to felling trees.

One of the standout features of the Poulan 545146926 is its efficient engine. The chainsaw is powered by a reliable 50cc two-cycle engine, which delivers ample power while maintaining fuel efficiency. This balance makes it suitable for extended use without the constant need for refueling. Additionally, the engine's design minimizes emissions, allowing for a more environmentally friendly operation, in keeping with modern standards.

The chainsaw is equipped with a 20-inch bar and chain, offering an optimal cutting length for a wide range of applications. This extended reach allows the user to tackle larger trees and thick branches with ease, making the Poulan 545146926 an excellent choice for both professional loggers and homeowners with extensive landscaping needs.

Safety is a priority in the design of the Poulan 545146926. The chainsaw features several safety mechanisms, including a chain brake that activates in the event of a kickback, reducing the risk of injury during operation. Furthermore, the comfortable handle design aids in reducing vibrations, which makes for a smoother cutting experience, minimizing fatigue during longer projects.

Another notable technology featured in this chainsaw is its easy-start system. This mechanism reduces the effort required to start the engine, allowing users to get to work quickly without struggling with traditional pull-start engines. The improved air filtration system further enhances performance, ensuring the engine operates smoothly and efficiently by keeping dirt and debris at bay.

In terms of maintenance, the Poulan 545146926 is designed for ease of use. Its tool-less chain tensioning system simplifies adjustments, allowing users to maintain optimal chain tension effortlessly. Additionally, the easy-access air filter and fuel cap streamline routine checks, making it convenient for users to keep their chainsaw in top working condition.

In summary, the Poulan 545146926 combines power, safety, and user-friendly features, making it an ideal choice for anyone needing a reliable chainsaw for various cutting tasks. Its advanced technology, efficient design, and focus on safety provide a comprehensive solution for both amateur and seasoned users.