Carton Contents, Assembly Tools Required

operate in a locale where such regulations ex- ist, you are legally responsible for maintaining the operating condition of these parts. Failure to do so is a violation of the law. For normal homeowner use, the muffler and spark arrest- ing screen will not require any service. After 50 hours of use, we recommend that your muffler be serviced or replaced by your Au- thorized Service Dealer.

SLift handlebar to upright position. Handlebar

CARTON CONTENTS

Check carton contents for the following:

Sbrushcutter

Sblade shield screws (4) S cupped washer

S large nut for installing blade S long hex wrench

S metal shield S plastic shield

S shoulder strap with warning S weed blade

S trimmer head (assembled on unit) S handlebar (assembled on unit)

S container of oil

Examine parts for damage. Do not use dam- aged parts.

NOTE: If you need assistance or find parts missing or damaged, call 1-800-554-6723.

It is normal for the fuel filter to rattle in the empty fuel tank.

Finding fuel or oil residue on muffler is normal due to carburetor adjustments and testing done by the manufacturer.

ASSEMBLY

WARNING: Always stop unit and dis- connect spark plug before performing any as- sembly procedures.

WARNING: Make sure your unit is properly assembled and all fasteners are se- cure.

TOOLS REQUIRED

SHex wrench (provided) S Adjustable wrench

ADJUST AND SECURE THE HAN- DLEBAR

DANGER: During blade usage, the barrier portion of the handlebar must be ad- justed and remain installed as shown to pro- vide a barrier between operator and the spin- ning blade. The handlebar clamp must be positioned between the arrows on the handle- bar decal.

S Rotate handlebar/clamp counterclockwise toward engine until clamp falls into groove of base.

Handlebar

Clamp

Knob

Clamp

Base

SPlace the handlebar in a comfortable oper- ating position.

SRetighten handlebar by turning clamp knob clockwise until handlebar is secure and sta- tionary in clamp base (clamp knob can not be overtightened).

ASSEMBLY OF SHOULDER STRAP

WARNING: Proper shoulder strap and handlebar adjustments before starting the engine are required.

STry on shoulder strap and adjust for fit and balance before starting the engine or begin- ning a cutting operation.

SInsert your right arm and head through the shoulder strap and allow it to rest on your left shoulder. Make sure the danger sign is on your back and the hook is to the right side of your waist.

NOTE: A one-half twist is built in the shoulder strap to allow the strap to rest flat on the shoul- der.

S Adjust the strap, allowing the hook to be about 6 inches below the waist.

SFasten the strap hook to the clamp located between the trigger handle and the handle- bar clamp base and lift the tool to the oper- ating position.

CONFIGURING YOUR UNIT

You can configure your unit using a cutting head for grass and light weeds, or a weed blade for cutting grass, weeds, and brush up to 1/2 inch in diameter. To assemble your unit, go to the section for the desired configuration and follow the instructions.

BC2400P specifications

The Poulan BC2400P is a robust and versatile string trimmer designed for both residential and professional use. One of its standout features is the powerful 2-cycle engine that delivers high performance and efficiency. With a displacement of 24 cc, this engine provides ample power to tackle dense grass and tough weeds, making it suitable for a variety of landscaping tasks.

Equipped with a straight shaft, the BC2400P offers an extended reach that allows users to easily trim under bushes and around obstacles without straining their backs. The straight shaft design also enhances precision, making it ideal for edge trimming along walkways and flower beds. This trimmer includes a dual line spool, which enables users to load two cutting lines simultaneously for a wider cutting path and faster trimming, ensuring a clean and efficient cut every time.

The Poulan BC2400P features an innovative Easy Start system, which reduces the pull resistance when starting the engine. This technology significantly minimizes the effort required to get the trimmer up and running, making it user-friendly even for those who may not have experience with two-stroke engines. Additionally, the engine is designed to run on a fuel mix that is environmentally friendly, producing fewer emissions compared to traditional gas-powered models.

Another notable characteristic of the BC2400P is its lightweight construction. Weighing in at just over 10 pounds, it allows for extended use without causing fatigue, making it an excellent choice for homeowners and professionals alike. The ergonomic handle design contributes to overall comfort, ensuring that users can maintain control and reduce vibration during operation.

Built for durability, the BC2400P features a robust housing that protects the internal components from wear and tear, extending its lifespan. Regular maintenance is straightforward, with easily accessible parts that simplify cleaning and servicing.

In summary, the Poulan BC2400P offers a powerful performance paired with user-friendly features, making it an outstanding choice for anyone in need of a reliable string trimmer. Its combination of advanced technologies, such as the Easy Start and dual line spool, along with its lightweight and ergonomic design, ensure efficiency and comfort for a wide range of trimming tasks. Whether you are maintaining a residential yard or taking on professional landscaping projects, the BC2400P stands out as a valuable tool in your outdoor equipment arsenal.