Troubleshooting Table Carburetor Adjustment

S Wind the line evenly and tightly onto the spool. Wind in the direction of the arrows found on the spool.

SPush the lines into the notches, leaving 3 to

5 inches (7 -- 12 cm) unwound.

SInsert the lines into the the exit holes in the hub as shown in the illustration.

SAlign notches with the line exit holes.

S Push the spool into the hub until it snaps into place.

SPull the lines extending outside of the hub to release the lines from the notches.

We recommend all service and adjustments not listed in this manual be performed by an Authorized Service Dealer.

TROUBLESHOOTING TABLE

CARBURETOR ADJUSTMENT

Your carburetor is equipped with limiter caps. Damage will occur if you turn the needles be- yond the limiter caps. Adjusting the carburetor is a complicated task. We recommend that you take your unit to an Authorized Service Dealer.

SPARK PLUG

Replace spark plug yearly with a Champion RCJ-8Y plug. Spark plug gap is 0.025 inch.

IGNITION TIMING

Ignition timing is fixed, non-adjustable.

NEED ASSISTANCE?

Call 1-800-554-6723.

NEED SERVICE PART?

Contact your dealer.

WARNING: Always stop unit and disconnect spark plug before performing any of the recommended remedies below other than remedies that require operation of the unit.

TROUBLE	CAUSE		REMEDY
Engine will not	S	Engine flooded.	S	See “Starting.”
start.	S	Fuel tank empty.	S	Fill tank with correct fuel mixture.
	S	Spark plug not firing.	S	Install new spark plug.
	S	Fuel not reaching carburetor.	S	Check for dirty fuel filter; replace.
				Check for kinked or split fuel line;
				repair or replace.
	S	Carburetor requires adjustment.	S	See “Carburetor Adjustments.”
Engine will not	S	Carburetor requires adjustment.	S	See “Carburetor Adjustments.”
idle properly.	S	Throttle trigger screw too	S	Loosen screw.
		tight.
Engine will not	S	Air filter dirty.	S	Clean or replace air filter.
accelerate,	S	Spark plug fouled.	S	Clean or replace spark plug; re-gap.
lacks power,	S	Carburetor requires adjustment.	S	See “Carburetor Adjustments.”
or dies under
a load.
Engine	S	Fuel mixture incorrect.	S	Empty fuel tank and refill with
smokes		Air filter dirty.		correct fuel mixture.
excessively.	S	Air filter dirty.	S	Clean or replace air filter.
	S	Carburetor requires adjustment.	S	See “Carburetor Adjustments.”
Line does not	S	Line improperly routed in head.	S	Check line routing.
advance or	S	Line improperly wound on	S	Rewind line tightly and evenly.
breaks while		spool.
cutting.	S	Line size incorrect.	S	Use only 0.080” (2 mm) dia. line.
Line welds	S	Line size incorrect.	S	Use only 0.080” (2 mm) dia. line.
onto spool.	S	Incorrect spool.	S	Replace with correct spool.
	S	Line is being crowded against	S	Cut with tip of line fully extended.
		material being cut.

Line pulls	S	Too little line outside of head.	S	Remove spool and pull 4 inches
back into		Line size incorrect.		(10 cm) of line outside of head.
head.	S	Line size incorrect.	S	Use only 0.080” (2 mm) dia. line.

BC2400P specifications

The Poulan BC2400P is a robust and versatile string trimmer designed for both residential and professional use. One of its standout features is the powerful 2-cycle engine that delivers high performance and efficiency. With a displacement of 24 cc, this engine provides ample power to tackle dense grass and tough weeds, making it suitable for a variety of landscaping tasks.

Equipped with a straight shaft, the BC2400P offers an extended reach that allows users to easily trim under bushes and around obstacles without straining their backs. The straight shaft design also enhances precision, making it ideal for edge trimming along walkways and flower beds. This trimmer includes a dual line spool, which enables users to load two cutting lines simultaneously for a wider cutting path and faster trimming, ensuring a clean and efficient cut every time.

The Poulan BC2400P features an innovative Easy Start system, which reduces the pull resistance when starting the engine. This technology significantly minimizes the effort required to get the trimmer up and running, making it user-friendly even for those who may not have experience with two-stroke engines. Additionally, the engine is designed to run on a fuel mix that is environmentally friendly, producing fewer emissions compared to traditional gas-powered models.

Another notable characteristic of the BC2400P is its lightweight construction. Weighing in at just over 10 pounds, it allows for extended use without causing fatigue, making it an excellent choice for homeowners and professionals alike. The ergonomic handle design contributes to overall comfort, ensuring that users can maintain control and reduce vibration during operation.

Built for durability, the BC2400P features a robust housing that protects the internal components from wear and tear, extending its lifespan. Regular maintenance is straightforward, with easily accessible parts that simplify cleaning and servicing.

In summary, the Poulan BC2400P offers a powerful performance paired with user-friendly features, making it an outstanding choice for anyone in need of a reliable string trimmer. Its combination of advanced technologies, such as the Easy Start and dual line spool, along with its lightweight and ergonomic design, ensure efficiency and comfort for a wide range of trimming tasks. Whether you are maintaining a residential yard or taking on professional landscaping projects, the BC2400P stands out as a valuable tool in your outdoor equipment arsenal.