HOW to Stop Your Unit Operating Position | Poulan BC2400P specification

HOW TO STOP YOUR UNIT							OPERATING POSITION
To stop the engine, move the ON/OFF switch
to the OFF position.
HOW TO START YOUR UNIT
Starting Position

WARNING: The trimmer head will turn while starting the engine. Avoid any con- tact with the muffler. A hot muffler can cause serious burns.

SRest engine and shield on ground, support- ing trimmer head off ground.

ON/OFF

Switch

Throttle Trigger

Starter Primer Bulb

Handle

Choke

Lever

Muffler

COLD ENGINE (or warm engine af- ter running out of fuel)

SMove the ON/OFF switch to the ON posi- tion.

SSlowly press the primer bulb 6 times.

SMove choke lever to FULL CHOKE posi- tion.

S Squeeze the throttle trigger fully and hold through all remaining steps.

SPull starter rope handle sharply 6 times. S Move choke lever to HALF CHOKE posi-

tion.

S Pull starter rope handle no more than 6 pulls, until engine runs.

S Allow engine to run 10 seconds, then move choke lever to OFF CHOKE position.

STARTING A WARM ENGINE

SMove the ON/OFF switch to the ON posi-

tion.

SMove choke lever to OFF CHOKE position. S Pull starter rope handle until engine runs. S If engine does not start in 5 pulls, follow in- structions in STARTING A COLD ENGINE.

S Extend your left arm and hold handlebar grip with your left hand.

SHold throttle grip with your right hand with

finger on throttle trigger.

SKeep unit below waist level.

SKeep shoulder strap pad centered on your left shoulder and danger sign centered on

your back.

S Maintain full weight of tool on your left shoulder.

S Without bending over, keep the blade or trimmer head near and parallel to the ground and not crowded into material being cut.

OPERATING INSTRUCTIONS FOR USE WITH TRIMMER HEAD

Before trimming, bring engine to a speed suffi- cient to cut material to be trimmed.

Do not run engine at a higher speed than nec- essary. The cutting line will cut efficiently when the engine is run at less than full throttle. At lower speeds, there is less engine noise and vibration. The cutting line will last longer and will be less likely to “weld” onto the spool. If trimmer head does not turn when the engine is in operation, make sure the tube is properly seated in engine shroud.

Always release the throttle trigger and allow the engine to return to idle speed when not cutting.

To stop engine:

SMove the ON/OFF switch to OFF.

SIf engine does not stop, move choke to the FULL CHOKE position.

ADVANCING THE TRIMMER LINE

Advance line by tapping the bottom of the cut- ting head lightly on the ground while engine is running at full speed. The line limiter blade (on underside of shield) will cut the line to the proper length.

WARNING: Use only 0.080” (2 mm) diameter line. Other sizes of line will not ad- vance properly and can cause serious injury. Do not use other materials such as wire, string, rope, etc. Wire can break off during cutting and become a dangerous missile that can cause serious injury.

BC2400P specifications

The Poulan BC2400P is a robust and versatile string trimmer designed for both residential and professional use. One of its standout features is the powerful 2-cycle engine that delivers high performance and efficiency. With a displacement of 24 cc, this engine provides ample power to tackle dense grass and tough weeds, making it suitable for a variety of landscaping tasks.

Equipped with a straight shaft, the BC2400P offers an extended reach that allows users to easily trim under bushes and around obstacles without straining their backs. The straight shaft design also enhances precision, making it ideal for edge trimming along walkways and flower beds. This trimmer includes a dual line spool, which enables users to load two cutting lines simultaneously for a wider cutting path and faster trimming, ensuring a clean and efficient cut every time.

The Poulan BC2400P features an innovative Easy Start system, which reduces the pull resistance when starting the engine. This technology significantly minimizes the effort required to get the trimmer up and running, making it user-friendly even for those who may not have experience with two-stroke engines. Additionally, the engine is designed to run on a fuel mix that is environmentally friendly, producing fewer emissions compared to traditional gas-powered models.

Another notable characteristic of the BC2400P is its lightweight construction. Weighing in at just over 10 pounds, it allows for extended use without causing fatigue, making it an excellent choice for homeowners and professionals alike. The ergonomic handle design contributes to overall comfort, ensuring that users can maintain control and reduce vibration during operation.

Built for durability, the BC2400P features a robust housing that protects the internal components from wear and tear, extending its lifespan. Regular maintenance is straightforward, with easily accessible parts that simplify cleaning and servicing.

In summary, the Poulan BC2400P offers a powerful performance paired with user-friendly features, making it an outstanding choice for anyone in need of a reliable string trimmer. Its combination of advanced technologies, such as the Easy Start and dual line spool, along with its lightweight and ergonomic design, ensure efficiency and comfort for a wide range of trimming tasks. Whether you are maintaining a residential yard or taking on professional landscaping projects, the BC2400P stands out as a valuable tool in your outdoor equipment arsenal.