Maintenance, Check for Loose Fasteners and Parts

which can damage the trimmer head, become entangled in the line, or be thrown causing a serious hazard.

SThe tip of the line does the cutting. You will achieve the best performance and minimum line wear by not crowding the line into the cutting area. The right and wrong

ways are shown below.

Tip of the line	Line crowded Into
does the cutting	work area

RightWrong

S The line will easily remove grass and weeds from around walls, fences, trees and flower beds, but it also can cut the tender bark of trees or shrubs and scar fences.

SFor trimming or scalping, use less than full throttle to increase line life and decrease head wear, especially:

S During light duty cutting.

S Near objects around which the line can

wrap such as small posts, trees or fence wire.

SFor mowing or sweeping, use full throttle for a good clean job.

TRIMMING -- Hold the bottom of the trimmer head about 3 inches (8 cm) above the ground and at an angle. Allow only the tip of the line to make contact. Do not force trimmer line into work area.

Trimming

3 inches (8 cm) above ground

SCALPING -- The scalping technique re- moves unwanted vegetation down to the ground. Hold the bottom of the trimmer head about 3 inches (8 cm) above the ground and at an angle. Allow the tip of the line to strike the ground around trees, posts, monuments, etc. This technique increases line wear.

Scalping

MOWING -- Your trimmer is ideal for mowing in places conventional lawn mowers cannot reach. In the mowing position, keep the line parallel to the ground. Avoid pressing the head into the ground as this can scalp the ground and damage the tool.

Mowing

SWEEPING -- The fanning action of the rotat- ing line can be used for a quick and easy clean up. Keep the line parallel to and above the surfaces being swept and move the tool from side to side.

Sweeping

MAINTENANCE

WARNING: Disconnect the spark plug before performing maintenance except for carburetor adjustments.

HELPFUL TIP

IMPORTANT: Have all

repairs other than the rec- ommended maintenance described in the instruction manual performed by an authorized service dealer.

If any dealer other than an authorized service dealer performs work on the product, Poulan PRO may not pay for repairs under warranty. It is your re- sponsibility to maintain and perform general maintenance.

CHECK FOR LOOSE

FASTENERS AND PARTS

SSpark Plug Boot S Air Filter

S Housing Screws

S Assist Handle Screw S Debris Shield

CHECK FOR DAMAGED OR WORN PARTS

Contact an authorized service dealer for re- placement of damaged or worn parts.

S ON/STOP Switch -- Ensure ON/STOP switch functions properly by pushing and releasing the switch. Make sure engine stops. Wait 5 seconds before attempting to restart unit to allow switch to reset. Restart engine and continue.

SFuel Tank -- Discontinue use of unit if fuel

tank shows signs of damage or leaks.

SDebris Shield -- Discontinue use of unit if debris shield is damaged.

115156126, PP330 specifications

Poulan is a well-known name in the outdoor power equipment industry, and their model 115156126, specifically the PP330, exemplifies the brand's commitment to quality and functionality. The Poulan PP330 is a versatile and robust trimmer designed for homeowners and landscapers seeking an efficient tool for managing their lawn care needs.

One of the standout features of the Poulan PP330 is its powerful 33cc two-cycle gas engine. This engine provides ample power for tackling dense grass and weeds, making it ideal for trimming and edging around gardens, patios, and driveways. The two-cycle design allows for an impressive power-to-weight ratio, meaning that users can enjoy high performance without handling overly heavy equipment.

The lightweight design of the PP330 is another notable characteristic. At just under 10 pounds, it offers ease of maneuverability, reducing user fatigue during extended use. The adjustable handle provides further comfort, allowing each user to find a position that best suits their height and working style. Whether users are tackling large areas or intricate landscaping, the PP330's ergonomic design significantly enhances the overall experience.

Equipped with a dual-line bump head, the PP330 ensures efficient trimming and edging. The bump head allows for easy line advancement, enabling users to quickly extend the trimmer line simply by tapping it on the ground. This feature is not only convenient but also helps maintain productivity by reducing downtime.

The Poulan PP330 also incorporates user-friendly technologies. The easy-start system minimizes the effort required to start the engine, making it accessible even to those less experienced with gas-powered equipment. This feature alleviates frustrations commonly associated with gas trimmers, thereby encouraging more frequent use and maintenance of lawns or gardens.

In conclusion, the Poulan 115156126, PP330 is a powerful and user-friendly trimmer that combines a robust engine, lightweight design, and convenient features to provide an exceptional lawn care experience. With its focus on comfort and efficiency, the PP330 stands out as a reliable tool for anyone looking to achieve a well-manicured landscape. Whether you’re a seasoned gardener or a homeowner seeking to enhance your outdoor space, the Poulan PP330 is an admirable choice for all your trimming needs.