HOW to Stop Your Unit, HOW to Start Your Unit

moisture absorption into the fuel/oil mixture leading to oil and fuel separation.

HOW TO STOP YOUR UNIT

SRelease the throttle trigger.

S Push and release the engine ON/STOP switch. The switch will automatically return to the ON position. Wait 5 seconds before at- tempting to restart unit to allow switch to reset.

ON/STOP switch

HOW TO START YOUR UNIT

WARNING: Avoid any contact with the muffler. A hot muffler can cause serious burns.

Starting position

HELPFUL TIP

If your engine still does not start after following these instructions, please call 1-800-554-6723.

STARTING A COLD ENGINE (or a warm engine after running out of fuel)

1.Set unit on a flat surface.

2.Slowly press the primer bulb 6 times.

3.Move choke lever to the FULL CHOKE position.

Primer bulb

Choke lever	Muffler

Starter handle

4.Pull starter rope handle sharply until engine sounds as if it is trying to start, but do not pull rope more than 6 times.

5.As soon as engine sounds as if it is trying to start, move choke lever to HALF CHOKE position.

6.Pull starter rope sharply until engine runs, but no more than 6 pulls. NOTE: If the en- gine doesn’t start after 6 pulls (at the HALF CHOKE position), move the choke lever to the FULL CHOKE position and press the primer bulb 6 times. Pull the starter rope 2 more times. Move the choke lever to the HALF CHOKE position and pull the starter

rope until the engine runs, but no more than 6 pulls. If the engine still doesn’t start, it is probably flooded. Proceed to STARTING A FLOODED ENGINE.

7.Once the engine starts, allow it to run 10 seconds. Squeeze throttle trigger and allow the unit to run for 30 more seconds at RUN. Release throttle trigger. NOTE: If engine dies with the choke lever in the RUN posi- tion, move the choke lever to FULL CHOKE then back to HALF CHOKE and pull the rope until engine runs, but no more than 6 pulls.

STARTING A WARM ENGINE

1.Move choke lever to the FULL CHOKE position, then to the HALF CHOKE posi- tion to set fast idle.

2.Pull starter rope sharply until engine runs, but no more than 6 pulls.

3.Allow engine to run 15 seconds, then move

the choke lever to RUN.

NOTE: If engine has not started, pull starter rope 5 more pulls. If engine still does not run, it is probably flooded.

STARTING A FLOODED ENGINE

Flooded engines can be started by placing the choke lever in the RUN position; then, pull the rope to clear the engine of excess fuel. This could require pulling the starter handle many times depending on how badly the unit is flooded. If the unit still doesn’t start, refer to TROUBLESHOOTING TABLE or call 1-800-554-6723.

OPERATING THE COUPLER

This model is equipped with a coupler which enables optional attachments to be installed. The optional attachments are:

MODEL:

Edger . . . . . . . . . . . . . . . . . . . . . . PPB1000E Cultivator . . . . . . . . . . . . . . . . . . . PPB2000T Brushcutter . . . . . . . . . . . . . . . . . PPB4000C Pruner . . . . . . . . . . . . . . . . . . . . . PPB5000P Pruner . . . . . . . . . . . . . . . . . . . . . PPB5500P

WARNING: Always stop unit and dis- connect spark plug before removing or instal- ling attachments.

REMOVING TRIMMER ATTACH-

MENT (OR OTHER OPTIONAL AT- TACHMENTS)

CAUTION: When removing or installing at- tachments, place the unit on a flat surface for

stability.

1.Loosen the coupler by turning the knob counterclockwise.

Coupler

AttachmentLOOSEN

Knob

TIGHTEN

115156126, PP330 specifications

Poulan is a well-known name in the outdoor power equipment industry, and their model 115156126, specifically the PP330, exemplifies the brand's commitment to quality and functionality. The Poulan PP330 is a versatile and robust trimmer designed for homeowners and landscapers seeking an efficient tool for managing their lawn care needs.

One of the standout features of the Poulan PP330 is its powerful 33cc two-cycle gas engine. This engine provides ample power for tackling dense grass and weeds, making it ideal for trimming and edging around gardens, patios, and driveways. The two-cycle design allows for an impressive power-to-weight ratio, meaning that users can enjoy high performance without handling overly heavy equipment.

The lightweight design of the PP330 is another notable characteristic. At just under 10 pounds, it offers ease of maneuverability, reducing user fatigue during extended use. The adjustable handle provides further comfort, allowing each user to find a position that best suits their height and working style. Whether users are tackling large areas or intricate landscaping, the PP330's ergonomic design significantly enhances the overall experience.

Equipped with a dual-line bump head, the PP330 ensures efficient trimming and edging. The bump head allows for easy line advancement, enabling users to quickly extend the trimmer line simply by tapping it on the ground. This feature is not only convenient but also helps maintain productivity by reducing downtime.

The Poulan PP330 also incorporates user-friendly technologies. The easy-start system minimizes the effort required to start the engine, making it accessible even to those less experienced with gas-powered equipment. This feature alleviates frustrations commonly associated with gas trimmers, thereby encouraging more frequent use and maintenance of lawns or gardens.

In conclusion, the Poulan 115156126, PP330 is a powerful and user-friendly trimmer that combines a robust engine, lightweight design, and convenient features to provide an exceptional lawn care experience. With its focus on comfort and efficiency, the PP330 stands out as a reliable tool for anyone looking to achieve a well-manicured landscape. Whether you’re a seasoned gardener or a homeowner seeking to enhance your outdoor space, the Poulan PP330 is an admirable choice for all your trimming needs.