Poulan PP330 Replacing the Trimmer Head, Carburetor Idle Speed Adjustment, Seasonal Storage

Page 16

REPLACING THE TRIMMER HEAD

1.Hold the dust cup with a wrench to keep the shaft from turning while removing and installing trimmer head.

Dust Cup

2.Remove trimmer head by turning coun- terclockwise (looking from bottom of unit).

3.Thread replacement trimmer head onto the shaft by turning clockwise. Only tighten hand tight!

CARBURETOR IDLE SPEED ADJUSTMENT

WARNING: Keep others away when making idle speed adjustments. The trimmer head or any optional attachment will be spin- ning during most of this procedure. Wear your protective equipment and observe all safety precautions. After making adjustments, the trimmer head or any optional attachment must not move/spin at idle speed.

The carburetor has been carefully set at the factory. Adjustments may be necessary if you notice any of the following conditions:

S Engine will not idle when the throttle is released.

S The trimmer head or any optional attachment moves/spins at idle.

Make adjustments with the unit supported so the cutting attachment is off the ground and will not make contact with any object. Hold the unit by hand while running and making ad- justments. Keep all parts of your body away from the cutting attachment and muffler.

To adjust idle speed:

Allow engine to idle. Adjust speed until engine runs without trimmer head or any optional at- tachment moving or spinning (idle too fast) or engine stalling (idle speed too slow).

STurn idle speed screw clockwise to increase engine speed if engine stalls or dies.

STurn idle speed screw counterclockwise to decrease engine speed if trimmer head or any optional attachment moves or spins at idle.

WARNING: Recheck the idle speed after each adjustment. The trimmer head or any optional attachment must not move or spin at idle speed to avoid serious injury to the operator or others.

Idle speed screw

Air filter cover

If you require further assistance or are unsure about performing this procedure, contact an authorized service dealer or call 1--800--554--6723.

STORAGE

WARNING: Perform the following steps after each use:

SAllow engine to cool before storing or trans- porting.

SStore unit and fuel in a well ventilated area where fuel vapors cannot reach sparks or open flames from water heaters, electric

motors or switches, furnaces, etc.

SStore unit with all guards in place. Position unit so that any sharp object cannot acci- dentally cause injury.

SStore unit and fuel well out of the reach of children.

SEASONAL STORAGE

Prepare unit for storage at end of season or if it will not be used for 30 days or more.

If your unit is to be stored for a period of time: S Clean the entire unit before lengthy

storage.

SStore in a clean dry area.

SLightly oil external metal surfaces.

FUEL SYSTEM

Under FUELING ENGINE in the OPERA- TION section of this manual, see message la- beled IMPORTANT regarding the use of ga- sohol in your engine.

Fuel stabilizer is an acceptable alternative in minimizing the formation of fuel gum deposits during storage. Add stabilizer to the gasoline in the fuel tank or fuel storage container.

Follow the mix instructions found on stabilizer container. Run engine at least 5 minutes after adding stabilizer.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Manual de Instrucciones Manuel d’Instructions Table of Contents Identification of Safety SymbolsIdentification of Safety Symbols Operator Safety Safety RulesOptional Attachments Unit / Maintenance Safety Fuel SafetyLine Trimmer Safety Transporting and StorageEdger Safety BLOWER/VACUUM SafetyBrushcutter Safety HandlebarCultivator Safety Hedge Trimmer SafetyPole Pruner Safety Away from the operatorSnow Thrower Safety Know how to stop quicklyAnother HeadAssembly Installing Trimmer ATTACH- MentAdjusting the Assist Handle Attaching ShieldOperation HOW to Stop Your Unit HOW to Start Your UnitStarting a Warm Engine Starting a Flooded EngineInstalling Optional ATTACH- Ments Operating PositionTrimmer Line Advance Cutting MethodsCheck for Loose Fasteners and Parts MaintenanceCheck for Damaged or Worn Parts Service and Adjustments Page Carburetor Idle Speed Adjustment Replacing the Trimmer HeadSeasonal Storage Fuel SystemTroubleshooting Table EngineOther Trouble Cause RemedyLimited Warranty Statesville RoadCanada, contact Ligations The U.S. EnvironmentalIntermediate 125 hours Extended 300 hours

115156126, PP330 specifications

Poulan is a well-known name in the outdoor power equipment industry, and their model 115156126, specifically the PP330, exemplifies the brand's commitment to quality and functionality. The Poulan PP330 is a versatile and robust trimmer designed for homeowners and landscapers seeking an efficient tool for managing their lawn care needs.

One of the standout features of the Poulan PP330 is its powerful 33cc two-cycle gas engine. This engine provides ample power for tackling dense grass and weeds, making it ideal for trimming and edging around gardens, patios, and driveways. The two-cycle design allows for an impressive power-to-weight ratio, meaning that users can enjoy high performance without handling overly heavy equipment.

The lightweight design of the PP330 is another notable characteristic. At just under 10 pounds, it offers ease of maneuverability, reducing user fatigue during extended use. The adjustable handle provides further comfort, allowing each user to find a position that best suits their height and working style. Whether users are tackling large areas or intricate landscaping, the PP330's ergonomic design significantly enhances the overall experience.

Equipped with a dual-line bump head, the PP330 ensures efficient trimming and edging. The bump head allows for easy line advancement, enabling users to quickly extend the trimmer line simply by tapping it on the ground. This feature is not only convenient but also helps maintain productivity by reducing downtime.

The Poulan PP330 also incorporates user-friendly technologies. The easy-start system minimizes the effort required to start the engine, making it accessible even to those less experienced with gas-powered equipment. This feature alleviates frustrations commonly associated with gas trimmers, thereby encouraging more frequent use and maintenance of lawns or gardens.

In conclusion, the Poulan 115156126, PP330 is a powerful and user-friendly trimmer that combines a robust engine, lightweight design, and convenient features to provide an exceptional lawn care experience. With its focus on comfort and efficiency, the PP330 stands out as a reliable tool for anyone looking to achieve a well-manicured landscape. Whether you’re a seasoned gardener or a homeowner seeking to enhance your outdoor space, the Poulan PP330 is an admirable choice for all your trimming needs.
Top Page Image Contents