Poulan PP025 instruction manual Hedge Trimmer Safety, Pole Pruner Safety, For damage

Page 5

WARNING: Inspect the area to be cultivated before starting the unit. Remove all debris and hard and sharp objects such as rocks, vines, branches, rope, string, etc.

SAvoid heavy contact with solid objects that might stop the tines. If heavy contact oc- curs, stop the engine and inspect the unit

for damage.

SNever operate the cultivator without the tine

cover in place and properly secured.

SKeep the tines and guard clear of debris. S After striking a foreign object, stop the en- gine, disconnect the spark plug and inspect the cultivator for damage. Repair before re-

starting.

S Disconnect attachment from the drive en- gine before cleaning the tines with a hose and water to remove any build--up. Oil the tines to prevent rust.

S Always wear gloves when servicing or cleaning the tines. The tines become very sharp from use.

S Do not run unit at high speed unless culti- vating.

HEDGE TRIMMER SAFETY

DANGER: RISK OF CUT; KEEP HANDS AWAY FROM BLADE -- Blade moves momentarily after the trigger is re- leased. Do not attempt to clear away cut ma- terial when the blade is in motion. Make sure the switch is in the OFF position, the spark plug wire is disconnected, and the blade has stopped moving before removing jammed material from the cutting blade. Do not grab or hold the unit by the cutting blade.

Blades move

 

Allow blades to stop

 

momentarily

 

before removing

after the

 

them from the cut.

trigger is

 

 

released.

 

 

 

 

 

WARNING: Inspect the area before starting the unit. Remove all debris and hard objects such as rocks, glass, wire, etc. that can ricochet, be thrown, or otherwise cause injury or damage during operation.

S Do not use a cutting blade that is bent, warped, cracked, broken or damaged in any other way. Have worn or damaged parts replaced by your authorized service dealer.

S Always keep unit in front of your body. Keep all parts of your body away from the cutting blade.

SKeep the cutting blade and air vents clear of debris.

POLE PRUNER SAFETY

WARNING: The reciprocating blade/ rotating chain can cause severe injury. In- spect the unit before use. Do not operate unit with a bent, cracked or dull blade or dull chain. Keep away from the blade/chain.

WARNING: The reciprocating blade/ rotating chain is sharp. Do not touch. To pre- vent serious injury, always stop engine and ensure blade/chain has stopped moving, dis- connect spark plug, and wear gloves when changing or handling the blade or chain.

WARNING: A coasting blade/rotat- ing chain can cause injury while it continues to move after the engine is stopped. Maintain proper control of the unit until the blade/chain has completely stopped moving. Keep hands, face and feet at a distance from all moving parts. Do not attempt to touch or stop the blade or chain when it is moving.

WARNING: Falling objects can cause severe head injury. Wear head protec- tion when operating this unit with a pole prun- er attachment.

WARNING: To prevent serious inju- ry, do not use more than one boom extension with a pole pruner attachment.

WARNING: Keep the pruner away from power lines or electrical wires.

SOnly use for pruning limbs or branches up to 4 inches in diameter.

S Do not operate the unit faster than the speed needed to prune. Do not run the unit at high speed when not pruning.

SAlways stop the unit when work is delayed or when walking from one cutting location to another.

SIf you strike or become entangled with a for- eign object, stop the engine immediately and check for damage. Have any damage repaired by an authorized service dealer before attempting further operations. Dis- card blades that are bent, warped, cracked or broken.

5

Image 5
Contents PP025 Unit / Maintenance Safety Safety RulesOperator Safety Line Trimmer Safety Fuel SafetyEdger Safety Transporting and StorageCultivator Safety BLOWER/VACUUM SafetyBrushcutter Safety Pole Pruner Safety Hedge Trimmer SafetyFor damage Cover in place and properly securedInstalling Trimmer ATTACH- Ment AssemblySnow Thrower Safety Attaching Shield Adjusting the Assist HandlePrimary Hole Secondary HoleOperation HOW to Start Your Unit HOW to Stop Your UnitStarting a Cold Engine Starting a Warm EngineTrimmer Line Advance Installing Optional ATTACH- MentsOperating Position Inches 8 cm above ground MaintenanceCutting Methods Service and Adjustments Seasonal Storage Carburetor AdjustmentFuel System PortingEngine Troubleshooting TableOther Trouble Cause RemedyLigations The U.S. Environmental Limited Warranty800--554--6723 Service