Poulan 530085855 manual HOW to Stop Your Unit, Starting Your Engine

Page 7

S Install the blade nut by threading onto the shaft counterclockwise.

Shield

 

 

 

 

Threaded

 

 

 

 

 

Dust Cup

 

 

 

Shaft

 

 

 

RetainingBlade Washer

Cupped

Washer

Nut

WARNING: Do not use any blades, or fastening hardware other than the

washers and nuts illustrated. These parts must be provided by POULAN PRO, and installed as shown below. Failure to use proper parts can cause the blade to fly off and seriously hurt you or others.

NOTE: Make sure all parts are in place as il- lustrated, and the blade is sandwiched be- tween the dust cup and the retaining washer. There should be no space between the blade and the dust cup or the retaining washer.

SAlign hole in the dust cup with the hole in the side of the gearbox by rotating the blade.

SInsert a hex wrench into the aligned holes. This will keep the shaft from turning while tightening the blade nut.

Hex Wrench

S Tighten the blade nut firmly with a wrench while holding hex wrench in position.

SRemove the hex wrench.

S Turn blade by hand. If the blade binds against the shield, or appears to be uneven, the blade is not centered, and you must rein- stall.

NOTE: To remove blade, insert hex wrench into aligned holes. Un-thread nut and remove parts. Be sure to store parts and instructions for future use.

This engine is certified to operate on unleaded gasoline. Gasoline must be mixed with a good quality 2-cycle air-cooled engine oil designed to be mixed at a ratio of 40:1. Poulan/Weed Eater brand oil is recommended. (A 40:1 ratio is ob- tained by mixing 3.2 ounces of oil with 1 gallon of unleaded gasoline). When mixing fuel follow the instructions printed on the container. Always read and follow the safety rules under FUEL SAFETY.

HOW TO STOP YOUR UNIT

S Move the ON/STOP switch to the STOP position (toward the cutting head).

SIf engine does not stop, move choke to the FULL CHOKE position.

ON/STOP ON Switch

STOP

Throttle Trigger

STARTING YOUR ENGINE

WARNING: The blade or trimmer head will turn while starting the engine. Avoid any contact with the muffler. A hot muffler can cause serious burns.

NOTE: A special feature called the “Throttle Lock” holds the throttle trigger in the depressed position during starting.

SLock throttle trigger into the starting postion by first pressing the lockout lever on the top of the control handle. While the lockout lever is depressed, squeeze and hold the throttle trigger.

Lock Button

Lockout

Lever

Throttle Trigger

S Before releasing the throttle trigger, press the lock button. While this button is still de- pressed release the throttle trigger.

NOTE: This should allow the throttle trigger to remain in the depressed position for start- ing. You may want to practice this a few times before you first start the unit.

S DO NOT squeeze throttle trigger during starting; otherwise, it will be necessary to reset the throttle lock.

COLD ENGINE OR WARM ENGINE AFTER RUNNING OUT OF FUEL

SRest engine and shield on ground, support- ing trimmer head off ground.

SMove the switch to the ON position. S Slowly press the primer bulb 6 times.

S Move the choke lever to FULL CHOKE position.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents PP196 Or remove loose clothing and jewelry or Operator SafetyUNIT/MAINTENANCE Safety AssemblyTransporting and Storage Fuel SafetyCutting Safety Carton ContentsAttaching the Control Handle to the Handlebar Assembly Tools RequiredAttaching the Tube Attaching the HandlebarAttaching the Plastic Shield and Trimmer Head Assembly of Shoulder StrapConfiguring Your Unit Assembly Information Trimmer HeadBrush Blade Assembly Information Brush BladeAssembly of the Metal Shield Assembly of the Metal BladeStop HOW to Stop Your UnitStarting Your Engine Cold Engine or Warm Engine After Running OUT of FuelStarter Choke Handle Primer Bulb Starting a Warm EngineAdvancing the Trimmer Line Operating Instructions for USE with BrushbladeReplacing the Line Ignition Timing Spool ReplacementCarburetor Adjustment Spark PlugState This Warranty Gives YOU Specific LEGAL RIGHTS, and YOU MAY have Other Rights Which Vary from State toNot Covered All failures caused by Warranted part still under warranty. What isAbuse, neglect, or improper maintenance are Any warranty maintenance or repair on

530085855 specifications

The Poulan 530085855 is a versatile and powerful trimmer designed for homeowners and professionals alike who seek efficiency and ease of use in yard maintenance. This trimmer offers a unique blend of advanced features and technology, making it one of the standout models in the Poulan line.

One of the main features of the Poulan 530085855 is its robust engine, which typically boasts a displacement of 25cc. This powerful engine provides ample torque and performance to cut through various types of grass and weeds with ease. It delivers reliable starting power, allowing users to get to work quickly without the frustrating tug of a stubborn pull cord.

The trimmer is equipped with a dual-line feed system that allows for quick line advancement, enabling users to work efficiently without constant interruptions for line replacement. This feature is particularly beneficial for those who tackle larger yards or commercial properties, as it reduces the downtime significantly.

In addition to its powerful engine and effective line feed system, the Poulan 530085855 incorporates a strap and handle design that enhances user comfort during prolonged use. The adjustable handle provides better control and maneuverability around flower beds and hard-to-reach areas, resulting in a more productive trimming experience.

One of the standout technologies in the Poulan 530085855 is its anti-vibration system, which minimizes hand fatigue and discomfort during operation. This technology is essential for users who need to spend extended periods trimming, as it promotes user comfort and reduces the risk of strain or injury.

Furthermore, the Poulan 530085855 is designed with a lightweight frame, making it easy to handle and transport. Users appreciate this feature, especially when navigating different terrains or carrying the trimmer over longer distances.

Durability is another important characteristic of this trimmer. Constructed with high-quality materials, the Poulan 530085855 is built to withstand the rigors of outdoor use, making it a reliable choice for those who require consistent performance over time.

Overall, the Poulan 530085855 combines power, comfort, and durability, making it an excellent choice for anyone looking to maintain a well-groomed yard. Whether you are a professional landscaper or a homeowner wanting to keep your backyard neat, this trimmer provides the features and technologies necessary for efficient yard work. Its performance, coupled with user-friendly design elements, solidifies its position as a valuable tool for outdoor maintenance tasks.
Top Page Image Contents