When you ship the product, Product service | Panasonic KX-TA1232

Attention

Attention

When using the KX-T7000 series, keep the following conditions in mind:

•If there is any trouble, unplug the extension line and connect a known working phone. If the known working phone operates properly, have the defective phone repaired by a specified Panasonic Factory Service Center. If the known working phone does not operate properly, check the Advanced Hybrid System and the internal extension wiring.

•Keep the unit away from heating appliances and electrical noise generating devices such as fluorescent lamps and motors.

•The unit should be kept free of dust, moisture and vibration, and should not be exposed to direct sunlight.

•Do not use benzine, thinner, or any abrasive powder to clean the cabinet. Wipe it with a soft cloth.

•Do not use any handset other than a Panasonic handset.

When you ship the product

Carefully pack and send it prepaid, adequately insured and preferably in the original carton. Attach a postage-paid letter, detailing the symptom, to the outside of the carton. DO NOT send the product to the Executive or Regional Sales offices. They are NOT equipped to make repairs.

Product service

Panasonic Factory Servicenters for this product are listed in the servicenter directory. Consult with your authorized Panasonic dealer for detailed instructions.

WARNING

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR ANY TYPE OF MOISTURE.

Accessory Order Information

•Replacement parts and accessories are available through your local authorized parts distributor.

•For ordering accessories, call toll free: 1-800-332-5368.

Part No.	Picture	Description	Comment
KX-J07W/B			213.36 cm (7 feet)
KX-J15W/B		Handset cord	457.2 cm (15 feet)
KX-J25W/B			762 cm (25 feet)
W:White	B:Black

4	User Manual

Image 4

Panasonic KX-TA1232 user manual When you ship the product, Product service, Accessory Order Information, Picture

Contents

Advanced Hybrid System Thank you for purchasing the Panasonic Telephone System Service Unit DescriptionTelephone Optional When you ship the product Product serviceAccessory Order Information Picture Who Should Use This Manual Features and CapabilitiesConstruction of This Manual Feature Numbers Terms used in the DescriptionsIf you use a dial pulse DP type single line telephone SLT Tones Features Guide References Programming Guide References Table of Contents 104 248 Operator / Manager Service Features 231251 256 262 Table of Contents Section PT Overview Configuration KX-T7020 KX-T7030 KX-T7130 KX-T7135 KX-T7050 KX-T7055 Location of Controls KX-T7020 KX-T7030 HANDSET/HEADSET Selector Message Button KX-T7130 / KX-T7135KX-T7135 has a backlit LCD KX-T7050 Message Button Intercom Button Redial Button Flash ButtonTransfer Button Pause Button Auto DIAL/STORE Button Monitor Button KX-T7055 Feature Button T7020 T7030 T7130 T7135 T7050 T7055 Feature ButtonsFixed Buttons Usage Features to be assigned Flexible ButtonsFlexible CO buttons located on PT only Button CO Conditions Line Access ButtonsSingle-CO S-CO button Group-CO G-CO button Loop-CO L-CO button Initial Settings When using the headset KX-T7030, KX-T7130 and KX-T7135 onlyVolume Control Handset Receiver/Headset/Ringer/Speaker To adjust the handset receiver volume To adjust the headset volume To adjust the ringer volumeTo adjust the speaker volume Be sure the headset is connected LED Indication on the Intercom Button LED IndicationLED Indication on the CO Button System Programming When Call Forwarding When Do Not Disturb BLF on DSS ButtonLED Indication on the FWD/DND Button Programming Guide Reference Section Station Programming Programming Mode Display PT-PGM ModeEntering Station Programming mode Station Programming Instructions Exiting Station Programming mode When the display shows the initial programming modeProgram access number Confirming the assigned function data Confirming the assigned data on the Flexible button Clearing the data on the Flexible button Message Waiting Message Button FWD/DND Button Save Button Account ButtonLog-In / Log-Out Button Phantom Extension Button Phantom Extension Ringing On/Off Set Pause Exit Station Programming Function Assignment Selection Programming Input Programming input Incoming Flexible Button Assignment 1234 Phantom Extension Ringing On/Off Set Ring On Jack01=EXT101 Station Programming Data Default Set Clear Ready? Station Programming Section User Programming Default Setting Using the OverlayGeneral Programming Instructions Required Telephone Set Entering the user programming mode Press Pause + + + User Programming Password default1234 Programming Guide References Programming Methods Entering Characters Combination Table Pressing Default 1 000 Date and Time SetDescription Selection PT Display ProgrammingPT Display Example Features Guide References 2 001 System Speed Dialing Number Set SPD Code?→ 000Not Stored# keys, and the FLASH, PAUSE, Secret and hyphen buttons Speed dial no User Programming 3 003 Extension Number Set #01EXT101 Jack NO?→Extension no User Programming 4 004 Extension Name Set Name 10 characters max #01Not Stored Name 5 017 Disa User Codes Disa user code 4 through 10 digits User Code NO?→ 01 C8Disa user code Disa user code no User Programming Section Station Features and Operation PT/SLT Before Operating What kind of telephone do you use? Description of Symbols Used Line access code For SLT, PT Making CallsIntercom Calling Outward Dialing Conditions Receiving Calls Station Features and Operation Absent Message Capability Parameters Message Cancel Canceling the absent messageDisplay PT Verified All Calls mode Verified Toll Restriction Override modeOption mode Account Code Entry Entering account codes during or after a conversation Memory Dialing Account button SLT Alternating to Voice-Calling mode Alternating to Ring-Calling modeVoice-signaling is not available in the following cases One time switching Mode Selection Answering, Direct Outside Line PT only To answer an incoming outside call Setting Automatic Callback Busy Camp-OnAnswering an intercom recall If you hear the telephone ringing Answering an outside line recall CancelingCoxx Free Setting / Canceling Background Music BGM PT onlyBGM On BGM Off Turning on/off Busy Station Signaling BSS If you hear a busy tone after making an intercom call Call Forwarding Summary Type DescriptionForwarded call is not forwarded furthermore Floating Station Confirmation tone DND FWD OFF Call Forwarding All Calls FWDAll Extxxxx Call Forwarding Busy Fwdbsy Extxxxx Call Forwarding No Answer Fwdna Extxxxx Call Forwarding Busy / No Answer FWDB/NAExtxxxx Class of Service Line access code Phone noCall Forwarding to Outside Line Fwdco Call Forwarding Follow Me At the destination extensionFWDFromExtxxxx Your extension no Call Forwarding Cancel Canceling Call Forwarding at your original extensionFWD/DND Cancel FWD Cancel Exxxx Call Hold To place a call on holdRetrieving a call on hold Music on Hold Automatic Disconnection Call Hold, Exclusive PT only To place a call on exclusive holdRetrieving a call on exclusive hold What if a call on Exclusive Hold is not retrieved? Hold Recall Call Hold Call Hold Retrieve Retrieving an outside call on holdRetrieving an intercom call on hold Outside line no System Additional Information Call Hold Call Information / Log, Incoming Display Operation for the KX-T7030/KX-T7130/KX-T71350111111111 To call back Programming Guide References Setting overwriting the call log in the personal area Call Log, Incoming PT onlyIncoming Log On Incoming Log Off 100 To confirm0010111111111 0020924773333 101 Confirming the number of logged callsClearing all call logs in the personal area Press the Caller ID Indication button 102 103 Call Log Lock Control, Incoming in the Personal Area Cancel Call Log Lock, Incoming in the Personal Area PT only104 Locking 105 Call Park 106Parking a call Call. Parked at 107 Retrieving a parked callNo Held Call Call Park Recall Call Pickup, Directed 108 Call Pickup, Group 109 Call Pickup, Outside Line 110 Call Pickup Deny 111Pickup Deny Pickup Allow 112 Call SplittingBetween two extensions 113 Call Transfer to Extension 114Screened Call Transfer to Extension Unscreened Call Transfer to Extension Call Transfer using a DSS button When One-Touch Transfer mode is enabledWhen One-Touch Transfer mode is disabled 115 101 116RCL Ext 117 Call Transfer to Outside LineScreened Call Transfer 118 Call Waiting 119Call Waiting On Call Waiting Off 120 To talk to the new party by terminating the current callWhile hearing a Call Waiting tone To talk to the new party by holding the current call 121 Call Waiting Tone Type Selection Using the Flash button Using the feature numberCall Waiting from Central Office 122 123 Caller ID Call Waiting PT onlyWhile talking to an external party 124 Camp-On Transfer to Phantom Extension / Ring Group 125 Feature Guide References 126 Conference 127To establish a conference During a two-party conversation 128 To leave the conferenceTo terminate one party and talk to the other To talk to the third party while holding the original party 129 To talk to the original party while holding the third partyTo put both parties on hold Executive Busy Override, Privacy Release 130 Conference, Unattended PT only 131To establish an Unattended Conference To return to the conference 132 Hold Recall Conference Data Mode On Data Mode OffData Line Security 133 134 Direct Inward System Access DisaCalling an extension Non Security Mode All Security Mode135 Calling an outside party 136 Re-tryDisa User Code Disa User Code Entry Failure 137 Do Not Disturb DND 138Do Not Disturb DND does not work for the following calls 139 140 Do Not Disturb DND Override101 DND When you hear the doorphone ring tone at the extension Doorphone Call141 Answering a doorphone call 142 To unlock the door from an assigned extensionDoor 1 Open Door opener no 143 Doorphone Call DestinationWhat if a doorphone call is not answered? Unlocking the door opener 144 How does this feature restrict the extension? Electronic Station Lockout145 Locked no 146 Line access code Emergency no Emergency Call147 Dialing Executive Busy Override Extension 148Executive Busy Override Deny Terminate one party and talk to the other 149 Executive Busy Override Outside Line PT only 150 151 Executive Busy Override Deny 152Busy Ovrde Deny Busy Ovrde Allow External Feature Access 153During a conversation with an outside party Flash Time 154 155 Flash PT onlyWhile hearing any tone, dialing, or talking Full One-Touch Dialing PT only 156 When the Auto ANSWER/MUTE indicator is on Ring/Voice Intercom Alerting Mode OverrideHands-free Answerback PT only 157 Switching from the handset to hands-free mode Switching from hands-free to the handset modeHands-free Operation PT only 158 Helpful hints 159 Intercom Calling 160 161 Preparation Live Call Screening LCS PT only*1162 Setting the password Flowchart of the Live Call Screening LCS Feature163 Canceling the password Setting Live Call ScreeningWhen the telephone is idle and on-hook Canceling Live Call Screening 165 166 Monitoring the recording messageDuring a conversation with another party Monitoring 167 Having a conversation with the party LCS button/LCS Cancel button LCS Password Clear168 Call Waiting Lockout 169 Log-In / Log-Out Log-In / Log-Out Using the Log-In / Log-Out button170 Log-In / Log-Out Using the feature number 171Log-in Log-out Log-In/Log-Out button 172 Message WaitingExtension no Phantom extension no 123Tony 173Calling back the message notification sender 174 Clearing all message notifications left on your extensionCallback Order VPS Integration 175 During a conversation in the hands-free mode When microphone mute is establishedMicrophone Mute PT only 176 Night / Day Lunch / Break Service Switching Day/Night mode Night/Day button operationSwitching Day/Night modes Feature number operation 177 When the telephone is idle Confirming the current mode178 179 One-Touch Dialing PT only 180Combination dialing Storing more than 16 digits number Operator Call 181 Outward Dialing, Line Access Summary 182 Line Access, Automatic 183 Line Access, Individual PT only Line Access, Outside Line Group184 Group no Paging Summary 185 To access all external pagers Paging AllPaging External 186 To access a particular pager 187Extrnl External pager no To access all paging groups 1-8 simultaneously To access a particular paging groupPaging Group 188 Paging Answer 189Answering a page sent through a built-in speaker Answering a page sent through a particular external pager Paging Deny PT only 190Paging Deny On Paging Deny Off Paging and Transfer Using Paging All191 Using Paging External to a particular external pager Using Paging External to all external pagers192 Using Paging Group to a particular paging group Using Paging Group to all paging groups193 194 To enable / disable SLT ringing When receiving a callParalleled Telephone Connection 195 Personal Speed Dialing 196Storing the phone number One-Touch Dialing 197 While the Phantom button indicator light is off Phantom Extension198 To call a phantom extension 199 200 While the Phantom button indicator light is flashing greenTo answer a phantom extension call 201 Phantom Extension button on a DSS Console 202 Pickup Dialing Hot LineProgramming the phone number 203 Privacy Release PT only 204 205 Pulse to Tone Conversion Desired no. Tone mode206 207 Quick DialingQuick dial no Redial, Last Number 208 Redial, Saved Number PT only 209Storing During a conversation or while hearing a busy tone Setting a monitored PT Room Monitor210 At the monitored telephone Canceling a monitor temporarily 211Room Monitor Off Monitoring through a doorphone 212 When storing the phone number Secret Dialing PT only213 123 Clearing the current feature settings Station Program Clear214 Ext Data Clear 215 System Speed DialingSystem speed dial no Alarm Cancelled Timed Reminder216 Wake-Up Call Checking the setting time Alarm 1010AMStopping the alarm 217 Alarm Not Stored 218Station Message Detail Recording Smdr Timed Reminder Ringing Time Toll Restriction Override Summary 219 Toll Restriction Override by Account Code Entry 220 Toll Restriction Override for System Speed Dialing 221 222 Trunk Answer From Any Station TafasWhile hearing a tone from the external pager Two-Way Recording into Voice Mail *1 PT only 223Recording into your mailbox Stopping recording 224 Recording into the mailbox of another extensionTwo-Way Recording into Phantom mailbox Extension no. or Phantom extension no. or Setting Call Forwarding destination to Voice Mail Voice Mail Integration225 FWD no Using the Message Waiting Message button Listening to a stored message226 Manual dialing 227 Voice Mail Transfer PT only 228If the extension has not set the Call Forwarding function If the call returns to you Walking COS 229Making a call At another extension 230 Operator / Manager Service Features 231 Background Music BGM External 232External BGM Off BGM is off External Pager Priority Call Log, Incoming in the Common Area Clear ALL 233 Call Log Lock Control, Incoming in the Personal Area 234Programming EXT No? Call Log Lock, Incoming in the Common Area Call Log Lock Control, Incoming in the Common Area Cancel235 236 Live Call Screening Password Control*1 EXT No? PT-PGM Mode1234Cancel? 237 Outgoing Message OGM 238Disa message Timed Reminder wake-up message 239 Recording a messageRec.00 Play28 Playing back a message 240OGM Type 241 Remote Station Lock Control1234CO Lock 242 System Working ReportSWR Data Dump SWR Data Clear 301st Call Log, Incoming in the Common Area Treatment 243Overwriting the call log in the common area Disregarding the 301st call in the common area 244 Alarm 0100AM Alarm 0100AM dailyTimed Reminder, Remote Wake-Up Call 245 Checking the time setting 246 Section DSS Console Features 247 248 249 PF Programmable Features Buttons 01 throghDSS Buttons with a Busy Lamp Field BLF 01 throgh 250 PF Programmable Feature ButtonsDSS Buttons with Busy Lamp Field BLF 251 Button 252 253 Extension Number AssignmentEXT-xxxx One-Touch Dialing Assignment 254 Feature no One-Touch Access Assignment for System Features255 Direct Station Dialing 256 One-Touch Dialing 257 One-Touch Access for System Features 258 One-Touch Transfer Call Transfer259 260 Section Appendix 261 262 Display ExamplesDisplay Description 263 264 265 Examples in Station Programming mode 266 267 Flexible Feature Numbers Default Additional Digits Feature Number List268 269 Feature Default 270 271 Tone List Tone Ring Tone 273 Troubleshooting If a power failure should occurPower Failure Transfer Problem Probable Cause Possible Solution Section Index 275 276 Account 277 Intercom 278 Select 279 Panasonic Consumer Electronics Copyright