Station Programming

2.1Station Programming Instructions

2.1.1Station Programming Instructions

Station Programming allows you, the proprietary telephone (PT) users, to program certain features from your telephone individually. To program, you need to switch your telephone to the Station Programming mode. During programming mode, your telephone is in the busy condition to both inside and outside callers. If you want to make a normal call handling operation, you must finish the programming mode.

Programming Mode Display

When you enter into the Station Programming mode, the display shows the following message as the initial programming mode;

PT-PGM Mode

We recommend a PT with display for Station Programming to avoid mis-operation.

The display also gives you helpful or stored data information related to your programming steps. In this section, we note the display example in the programming steps, if required. You can also refer to the "Display Examples" in the Appendix (Section 6).

Entering Station Programming mode

PT

Be sure that the telephone is idle and on-hook.

PAUSE

9

9

Press PAUSE.

Dial 99.

The STORE indicator lights.

If 99 is not dialed within 5 seconds after the PAUSE button is pressed, the Station Programming mode is canceled.

<PT Display Example>

PT-PGM Mode

-Initial programming display

If there is no entry within one minute, the Station Programming mode is canceled and normal call handling mode resumes automatically.

30

User Manual

Page 30
Image 30
Panasonic KX-TA1232 user manual Station Programming Instructions, Programming Mode Display, PT-PGM Mode