246, Checking the time setting | Panasonic KX-TA1232 instruction

Station Features and Operation (PT/SLT)

Checking the time setting

Display PT

7	2	extension no.	or	(DSS)

Lift the handset or press	Dial 7 2.	Dial the desired extension			Hang up or press
SP-PHONE.		number or press DSS on			SP-PHONE.
		which you have set
		the Timed Reminder.
<PT Display Example>
If "10:10" has been set, the display shows;			If time setting is not stored.

Alarm 10:10AM

or

Alarm 10:10AM

–only one time

–daily

Alarm Not Stored

Conditions

•The system clock must be set correctly beforehand.

•There is no limit to the number of the extensions who can set the Timed Reminder at the same time.

•Only the latest time setting is valid at the extension whether it was set by the extension user (Timed Reminder) or by the Manager extension or an Operator (Timed Reminder, Remote).

•Station Message Detail Recording (SMDR)

SMDR automatically records the detailed Timed Reminder information (date, time, extension number, start/no answer). It is programmable to be printed out when the Timed Reminder starts and the alarm is not answered. Refer to "Station Message Detail Recording (SMDR)" in the Features Guide for further information.

Programming Guide References

[000] Date and Time Set

[217]Timed Reminder Alarm Ring Time

[990]System Additional Information

User Manual References

4.3.78Timed Reminder

246	User Manual

Image 246

Panasonic KX-TA1232 user manual 246, Checking the time setting

Contents

Advanced Hybrid System Thank you for purchasing the Panasonic Telephone System Telephone Service UnitDescription Optional Accessory Order Information When you ship the productProduct service Picture Features and Capabilities Who Should Use This ManualConstruction of This Manual If you use a dial pulse DP type single line telephone SLT Feature NumbersTerms used in the Descriptions Tones Features Guide References Programming Guide References Table of Contents 104 Operator / Manager Service Features 231 248251 256 262 Table of Contents Section PT Overview Configuration KX-T7020 KX-T7030 KX-T7130 KX-T7135 KX-T7050 KX-T7055 Location of Controls KX-T7020 KX-T7030 HANDSET/HEADSET Selector KX-T7130 / KX-T7135 Message ButtonKX-T7135 has a backlit LCD Transfer Button Pause Button Auto DIAL/STORE Button KX-T7050Message Button Intercom Button Redial Button Flash Button Monitor Button KX-T7055 Feature Buttons Feature Button T7020 T7030 T7130 T7135 T7050 T7055Fixed Buttons Usage Flexible CO buttons located on PT only Features to be assignedFlexible Buttons Button CO Line Access Buttons ConditionsSingle-CO S-CO button Group-CO G-CO button Loop-CO L-CO button Volume Control Handset Receiver/Headset/Ringer/Speaker Initial SettingsWhen using the headset KX-T7030, KX-T7130 and KX-T7135 only To adjust the handset receiver volume To adjust the speaker volume To adjust the headset volumeTo adjust the ringer volume Be sure the headset is connected LED Indication LED Indication on the Intercom ButtonLED Indication on the CO Button LED Indication on the FWD/DND Button System Programming When Call Forwarding When Do Not DisturbBLF on DSS Button Programming Guide Reference Section Station Programming Entering Station Programming mode Programming Mode DisplayPT-PGM Mode Station Programming Instructions Program access number Exiting Station Programming modeWhen the display shows the initial programming mode Confirming the assigned function data Confirming the assigned data on the Flexible button Clearing the data on the Flexible button Log-In / Log-Out Button Phantom Extension Button Message Waiting Message ButtonFWD/DND Button Save Button Account Button Phantom Extension Ringing On/Off Set Pause Exit Station Programming Function Assignment Selection Programming Input Programming input Incoming Flexible Button Assignment 1234 Phantom Extension Ringing On/Off Set Ring On Jack01=EXT101 Station Programming Data Default Set Clear Ready? Station Programming Section User Programming General Programming Instructions Default SettingUsing the Overlay Required Telephone Set Entering the user programming mode Press Pause + + + User Programming Password default1234 Programming Guide References Programming Methods Entering Characters Combination Table Pressing Description Default1 000 Date and Time Set Selection Programming PT DisplayPT Display Example Features Guide References 2 001 System Speed Dialing Number Set # keys, and the FLASH, PAUSE, Secret and hyphen buttons SPD Code?→000Not Stored Speed dial no User Programming 3 003 Extension Number Set Jack NO?→ #01EXT101Extension no User Programming 4 004 Extension Name Set Name 10 characters max #01Not Stored Name 5 017 Disa User Codes Disa user code 4 through 10 digits Disa user code User Code NO?→01 C8 Disa user code no User Programming Section Station Features and Operation PT/SLT Before Operating What kind of telephone do you use? Description of Symbols Used Intercom Calling Line access code For SLT, PTMaking Calls Outward Dialing Conditions Receiving Calls Station Features and Operation Absent Message Capability Parameters Canceling the absent message Message CancelDisplay PT Option mode Verified All Calls modeVerified Toll Restriction Override mode Account Code Entry Entering account codes during or after a conversation Memory Dialing Account button SLT Voice-signaling is not available in the following cases Alternating to Voice-Calling modeAlternating to Ring-Calling mode One time switching Mode Selection Answering, Direct Outside Line PT only To answer an incoming outside call Answering an intercom recall SettingAutomatic Callback Busy Camp-On If you hear the telephone ringing Canceling Answering an outside line recallCoxx Free BGM On BGM Off Setting / CancelingBackground Music BGM PT only Turning on/off Busy Station Signaling BSS If you hear a busy tone after making an intercom call Forwarded call is not forwarded furthermore Call Forwarding SummaryType Description Floating Station Confirmation tone DND FWD OFF Call Forwarding All Calls FWDAll Extxxxx Call Forwarding Busy Fwdbsy Extxxxx Call Forwarding No Answer Fwdna Extxxxx Call Forwarding Busy / No Answer FWDB/NAExtxxxx Call Forwarding to Outside Line Class of ServiceLine access code Phone no Fwdco FWDFromExtxxxx Call Forwarding Follow MeAt the destination extension Your extension no FWD/DND Cancel Call Forwarding CancelCanceling Call Forwarding at your original extension FWD Cancel Exxxx Retrieving a call on hold Call HoldTo place a call on hold Music on Hold Automatic Disconnection Retrieving a call on exclusive hold Call Hold, Exclusive PT onlyTo place a call on exclusive hold What if a call on Exclusive Hold is not retrieved? Hold Recall Call Hold Retrieving an intercom call on hold Call Hold RetrieveRetrieving an outside call on hold Outside line no System Additional Information Call Hold 0111111111 Call Information / Log, IncomingDisplay Operation for the KX-T7030/KX-T7130/KX-T7135 To call back Programming Guide References Incoming Log On Setting overwriting the call log in the personal areaCall Log, Incoming PT only Incoming Log Off 0010111111111 100To confirm 0020924773333 Clearing all call logs in the personal area 101Confirming the number of logged calls Press the Caller ID Indication button 102 103 104 Call Log Lock Control, Incoming in the Personal Area CancelCall Log Lock, Incoming in the Personal Area PT only Locking 105 Parking a call Call Park106 Call. Parked at No Held Call 107Retrieving a parked call Call Park Recall Call Pickup, Directed 108 Call Pickup, Group 109 Call Pickup, Outside Line 110 Pickup Deny Call Pickup Deny111 Pickup Allow Call Splitting 112Between two extensions 113 Screened Call Transfer to Extension Call Transfer to Extension114 Unscreened Call Transfer to Extension When One-Touch Transfer mode is disabled Call Transfer using a DSS buttonWhen One-Touch Transfer mode is enabled 115 116 101RCL Ext Call Transfer to Outside Line 117Screened Call Transfer 118 Call Waiting On Call Waiting119 Call Waiting Off While hearing a Call Waiting tone 120To talk to the new party by terminating the current call To talk to the new party by holding the current call 121 Call Waiting Tone Type Selection Call Waiting from Central Office Using the Flash buttonUsing the feature number 122 Caller ID Call Waiting PT only 123While talking to an external party 124 Camp-On Transfer to Phantom Extension / Ring Group 125 Feature Guide References 126 To establish a conference Conference127 During a two-party conversation To terminate one party and talk to the other 128To leave the conference To talk to the third party while holding the original party To put both parties on hold 129To talk to the original party while holding the third party Executive Busy Override, Privacy Release 130 To establish an Unattended Conference Conference, Unattended PT only131 To return to the conference 132 Hold Recall Conference Data Line Security Data Mode OnData Mode Off 133 Direct Inward System Access Disa 134Calling an extension 135 Non Security ModeAll Security Mode Calling an outside party Disa User Code 136Re-try Disa User Code Entry Failure 137 Do Not Disturb Do Not Disturb DND138 DND does not work for the following calls 139 Do Not Disturb DND Override 140101 DND 141 When you hear the doorphone ring tone at the extensionDoorphone Call Answering a doorphone call Door 1 Open 142To unlock the door from an assigned extension Door opener no What if a doorphone call is not answered? 143Doorphone Call Destination Unlocking the door opener 144 145 How does this feature restrict the extension?Electronic Station Lockout Locked no 146 147 Line access code Emergency noEmergency Call Dialing Executive Busy Override Deny Executive Busy Override Extension148 Terminate one party and talk to the other 149 Executive Busy Override Outside Line PT only 150 151 Busy Ovrde Deny Executive Busy Override Deny152 Busy Ovrde Allow During a conversation with an outside party External Feature Access153 Flash Time 154 Flash PT only 155While hearing any tone, dialing, or talking Full One-Touch Dialing PT only 156 Hands-free Answerback PT only When the Auto ANSWER/MUTE indicator is onRing/Voice Intercom Alerting Mode Override 157 Hands-free Operation PT only Switching from the handset to hands-free modeSwitching from hands-free to the handset mode 158 Helpful hints 159 Intercom Calling 160 161 Live Call Screening LCS PT only*1 Preparation162 Flowchart of the Live Call Screening LCS Feature Setting the password163 When the telephone is idle and on-hook Canceling the passwordSetting Live Call Screening Canceling Live Call Screening 165 During a conversation with another party 166Monitoring the recording message Monitoring 167 Having a conversation with the party 168 LCS button/LCS Cancel buttonLCS Password Clear Call Waiting Lockout 169 Log-In / Log-Out Using the Log-In / Log-Out button Log-In / Log-Out170 Log-in Log-out Log-In / Log-Out Using the feature number171 Log-In/Log-Out button Message Waiting 172Extension no Phantom extension no 173 123TonyCalling back the message notification sender Callback Order 174Clearing all message notifications left on your extension VPS Integration 175 Microphone Mute PT only During a conversation in the hands-free modeWhen microphone mute is established 176 Switching Day/Night modes Feature number operation Night / Day Lunch / Break ServiceSwitching Day/Night mode Night/Day button operation 177 Confirming the current mode When the telephone is idle178 179 Combination dialing One-Touch Dialing PT only180 Storing more than 16 digits number Operator Call 181 Outward Dialing, Line Access Summary 182 Line Access, Automatic 183 184 Line Access, Individual PT onlyLine Access, Outside Line Group Group no Paging Summary 185 Paging External To access all external pagersPaging All 186 Extrnl To access a particular pager187 External pager no Paging Group To access all paging groups 1-8 simultaneouslyTo access a particular paging group 188 Answering a page sent through a built-in speaker Paging Answer189 Answering a page sent through a particular external pager Paging Deny On Paging Deny PT only190 Paging Deny Off Using Paging All Paging and Transfer191 Using Paging External to all external pagers Using Paging External to a particular external pager192 Using Paging Group to all paging groups Using Paging Group to a particular paging group193 194 Paralleled Telephone Connection To enable / disable SLT ringingWhen receiving a call 195 Storing the phone number Personal Speed Dialing196 One-Touch Dialing 197 198 While the Phantom button indicator light is offPhantom Extension To call a phantom extension 199 While the Phantom button indicator light is flashing green 200To answer a phantom extension call 201 Phantom Extension button on a DSS Console Pickup Dialing Hot Line 202Programming the phone number 203 Privacy Release PT only 204 205 Desired no. Tone mode Pulse to Tone Conversion206 Quick Dialing 207Quick dial no Redial, Last Number 208 Storing Redial, Saved Number PT only209 During a conversation or while hearing a busy tone 210 Setting a monitored PTRoom Monitor At the monitored telephone Room Monitor Off Canceling a monitor temporarily211 Monitoring through a doorphone 212 213 When storing the phone numberSecret Dialing PT only 123 214 Clearing the current feature settingsStation Program Clear Ext Data Clear System Speed Dialing 215System speed dial no 216 Alarm CancelledTimed Reminder Wake-Up Call Stopping the alarm Checking the setting timeAlarm 1010AM 217 Station Message Detail Recording Smdr Alarm Not Stored218 Timed Reminder Ringing Time Toll Restriction Override Summary 219 Toll Restriction Override by Account Code Entry 220 Toll Restriction Override for System Speed Dialing 221 Trunk Answer From Any Station Tafas 222While hearing a tone from the external pager Recording into your mailbox Two-Way Recording into Voice Mail *1 PT only223 Stopping recording Two-Way Recording into Phantom mailbox 224Recording into the mailbox of another extension Extension no. or Phantom extension no. or 225 Setting Call Forwarding destination to Voice MailVoice Mail Integration FWD no 226 Using the Message Waiting Message buttonListening to a stored message Manual dialing 227 If the extension has not set the Call Forwarding function Voice Mail Transfer PT only228 If the call returns to you Making a call Walking COS229 At another extension 230 Operator / Manager Service Features 231 External BGM Off BGM is off Background Music BGM External232 External Pager Priority Call Log, Incoming in the Common Area Clear ALL 233 Programming Call Log Lock Control, Incoming in the Personal Area234 EXT No? Call Log Lock Control, Incoming in the Common Area Cancel Call Log Lock, Incoming in the Common Area235 236 1234Cancel? Live Call Screening Password Control*1EXT No? PT-PGM Mode 237 Disa message Outgoing Message OGM238 Timed Reminder wake-up message Rec.00 239Recording a message Play28 240 Playing back a messageOGM Type Remote Station Lock Control 2411234CO Lock System Working Report 242SWR Data Dump SWR Data Clear Overwriting the call log in the common area 301st Call Log, Incoming in the Common Area Treatment243 Disregarding the 301st call in the common area 244 Timed Reminder, Remote Wake-Up Call Alarm 0100AMAlarm 0100AM daily 245 Checking the time setting 246 Section DSS Console Features 247 248 PF Programmable Features Buttons 01 throgh 249DSS Buttons with a Busy Lamp Field BLF 01 throgh PF Programmable Feature Buttons 250DSS Buttons with Busy Lamp Field BLF 251 Button 252 Extension Number Assignment 253EXT-xxxx One-Touch Dialing Assignment 254 One-Touch Access Assignment for System Features Feature no255 Direct Station Dialing 256 One-Touch Dialing 257 One-Touch Access for System Features 258 Call Transfer One-Touch Transfer259 260 Section Appendix 261 Display Examples 262Display Description 263 264 265 Examples in Station Programming mode 266 267 Feature Number List Flexible Feature Numbers Default Additional Digits268 269 Feature Default 270 271 Tone List Tone Ring Tone 273 Power Failure Transfer TroubleshootingIf a power failure should occur Problem Probable Cause Possible Solution Section Index 275 276 Account 277 Intercom 278 Select 279 Panasonic Consumer Electronics Copyright