![](/images/new-backgrounds/1305454/30545471x1.webp)
OUTPUT TERMINALS
TAPE END OUT Terminal
œDuring recording, when the end of the tape is reached or when the tape counter reading indicates 7 hours 57 minutes or more, the output becomes 0V (Low).
œTo reset the output, press the STOP or EJECT button.
œDuring autorepeat recording, when the end of the tape is reached, the output becomes 0V (Low) for about 2 seconds only.
Tape end or 7H57M00S
Output reset
5V (H)
(Output impedance: 5.7 kΩ) 0V (L)
TAPE END OUT Terminal Output Setting
1Press the MENU button until the (SET UP 3) menu is displayed.
@@@@@@@<SET@UP@3>
öALARM@MODE@@@@@@@Y1
öALARM@DURATION@@@20S
öVERTICAL@SYNC@@@@Y
öEXT@TIME@ADJ.@@@@01:00
öTAPE@IN@MODE@@@@@STOP
öTAPE@END@MODE@@@@REW
2Turn the JOG dial, until the “TAPE END OUT” setting is flashing.
3Turn the SHUTTLE ring, to select the desired output mode.
END . . . . . . . The output becomes 0 V (Low) when the tape reaches the end.
4Press the SEARCH button to save the setting.
WARNING OUT Terminal
œIf the tape stops or other problem, the output becomes 0V (Low).
œTo reset the output, press the STOP or ALL RESET button or unplug the power cord then plug it back in.
Tape movement stop
Output reset
5V (H)
(Output impedance: 5.7 kΩ) 0V (L)
NOTE:
œIf the output is 0V (Low) due to the clog detect function, it can be reset by simply pressing the STOP button.
TIMER OUT Terminal
œDuring timer recording DC 12 V (High) are output. (During timer recording
Timer recording
12V (H)
(Output impedance: 5.7 kΩ) 0V (L)
COM Terminal
œCommon GND (ground) terminal when connecting other terminals to external devices.
English | 35 |