ALARM RECORDING
Alarm Search
To go to the beginning of a desired alarm recording.
1Press the SEARCH button during stop mode.
ø“AL SEARCH 01” will be displayed on screen.
2Press the REC/PLAY SPEED l (or j) button to set the desired alarm number (1 to 99), then turn the SHUTTLE ring clockwise (or counterclockwise).
øThe desired alarm is searched and a still image of the beginning of the alarm recording will appear
NOTE:
œThe alarm number is relative to the actual tape position. (Please refer to the illustration below.)
|
|
|
|
| Playback |
|
| |||
|
|
|
|
|
|
| ||||
| Alarm number 2 | 1 |
|
| 1 | 2 | ||||
Alarm |
| input point |
|
|
|
|
|
|
| |
trigger |
|
|
|
|
|
|
| |||
|
|
|
|
|
| |||||
|
| Rewind direction |
|
|
| |||||
|
|
|
|
| ||||||
Actual position | ||||||||||
|
|
|
|
|
|
| ||||
3Press the PLAY button.
øPlayback will start.
Alarm Scan
To look for an alarm recording by viewing the first 5 seconds of each alarm recording.
1Press the SEARCH button twice during stop mode.
ø“AL SCAN” will be displayed on screen.
2Turn the SHUTTLE ring clockwise (or counterclockwise).
øThe unit will advance (or rewind) the tape at high speed and playback the first 5 seconds of every alarm recording.
øTo cancel the alarm scan mode, press the STOP button.
3While the desired recording is being played back, press the PLAY button.
øPlayback will start, alarm scan mode is cancelled.
English | 19 |
