NORMAL RECORDING
Normal Recording
Before starting
œTurn the power on to all devices used.
œLoad a cassette tape with
NOTE:
œIf in the (SET UP 3) menu, TAPE IN MODE is set to “REC”, recording will start after the tape thread has been checked.
œSet the ON SCREEN switch to the “ON” position.
œSet the TAPE SELECT switch to the
[Recording Speed Mode]
(When the TAPE SELECT switch is set to “T-160”)
Recording | Maximum | Recording |
|
|
speed mode | recording | interval | Audio recording | Tape motion |
(hour mode) | duration (hours) | (second) |
|
|
8 | 8 | 1/60 | Possible | Continuous |
24 | 24 | 3/60 | ||
40 | 40 | 5/60 |
|
|
(When the TAPE SELECT switch is set to “T-120”)
Recording | Maximum | Recording |
|
|
speed mode | recording | interval | Audio recording | Tape motion |
(hour mode) | duration (hours) | (second) |
|
|
6 | 6 | 1/60 | Possible | Continuous |
18 | 18 | 3/60 | ||
30 | 30 | 5/60 |
|
|
NOTE:
œSet the TAPE SELECT switch according to the duration of the tape used.
1Press the REC/PLAY SPEED l (or j) button to set the recording speed mode.
øThe recording speed mode is displayed
2Press the REC button.
øThe record indicator “m” light.
øRecording starts.
øWhen the end of the tape is reached, “OFF” will be displayed.
NOTES:
œIf in the (SET UP 2) menu, in the BUZZER section TAPE END is set to “Y”, the buzzer will be heard as long as “OFF” is displayed on the digital display.
œTo cancel the “OFF” display, press the STOP, EJECT or PLAY button or turn the SHUTTLE ring.
œIf recording stops due to a problem with the tape or other reason, the unit will try once to resume recording. If the tape still does not advance, the VCR will go into stop mode.
3To stop recording, press the STOP button.
NOTES:
œA tape recording made on this VCR may not play back with the same degree of clarity on a time lapse from another manufacturer.
œIf you press on the REC button and the loaded cassette has no
NOTE:
œThe tape speed display will vary according to the TAPE SELECT switch setting. In this manual, all the examples and displays used are for when the TAPE SELECT switch is set to
For example, if the recording speed mode is “8”, then the corresponding recording speed when set to
Record Pause
Recording can be interrupted temporarily.
1Press the STILL/PAUSE button during recording.
øThe Pause/Still indicator “N” blinks.
NOTES:
œThe image appears
œIf a recording pause continues for 5 minutes or more, the VCR will go into stop mode to avoid damaging the tape.
2To resume recording, press the REC button, or press the STILL/PAUSE button again.
English | 13 |