User Programming

3.1.2Programming Methods

Advancing to the next stage

When "USR-PGM NO? " is displayed, you can select one of the following:

To go to program [000], press the NEXT button.

To go to another program, enter the 3-digit program address.

Storing your data

Press STORE to store your data.

• The STORE indicator lights red and a confirmation tone sounds.

*Confirmation tone (one beep)

After pressing STORE, you will hear a beep. This informs you that storage has been completed successfully.

*Confirmation tone (two beeps)

This informs you that the parameter has already been stored.

*Alarm tone (three beeps)

If you hear this alarm, your entry is not valid.

Making another selection within the same program address

To go to the next selection, press NEXT.

To go to the previous selection, press PREV.

To make a specific selection, press SELECT and then enter the number.

Accessing another program address

a)While displaying the program address and title:

To go to the next Larger program address:

Press the or MESSAGE button.

To go to the next Smaller program address:

Press the or SECRET (INTERCOM) button.

b)While programming:

To go to a specific program address:

Press END, then enter the program address.

Returning to the operation mode

1.Lift the handset while in programming mode.

2.When the Initial Message: USR-PGM NO? is displayed, press the PAUSE button. (To display the Initial Message, press END.)

User Manual

47

Page 47
Image 47
Panasonic KX-TA1232 user manual Programming Methods