Panasonic KX-TA1232 user manual 267

Appendix

Display	Description
Hands-free:On	Enable "Full One-Touch Dialing" mode.
Jack04 <=> EXT104	Confirm jack number and extension number.
Loop-CO	Loop-CO (L-CO) button is assigned.
Message Waiting	Message Waiting (MESSAGE) button is assigned.
MW-123	The Another Extension Message Waiting button is
	assigned.
NIGHT	Night/Day button is assigned.
Not Stored	No programming is assigned.
Pref.In :CO-02	Select "Prime Line (Outside Line) Preference —
	Incoming".
Pref.In :NO	Select "No Line Preference — Incoming".
Pref.In :Ring	Select "Ring Line Preference — Incoming".
Pref.Out:CO-02	Select "Prime Line (Outside Line) Preference —
	Outgoing".
Pref.Out:ICM	Select "Prime Line (INTERCOM) Preference —
	Outgoing".
Pref.Out:Idle	Select "Idle Line Preference — Outgoing".
Pref.Out:No	Select "No Line Preference — Outgoing".
Save	SAVE button is assigned.
Tone Call	Select Ring-Calling mode.
TRK GRP-3	Group-CO (G-CO) button is assigned.
VTR-101	Voice Mail (VM) Transfer button is assigned.
Voice Call	Select Voice-Calling mode.
092-555-2111	One-Touch Dialing button is assigned.

Conditions

•If the displayed characters exceed sixteen digits, "&" is shown at the right-hand edge.

•The duration time display is only shown when you make or receive an outside call. Count start time for outgoing calls can be programmed as desired.

•When you confirm key programming, be sure to press a button while on-hook. If the "Full One-Touch Dialing" feature is set, dialing mode will start when pressing PF (Programmable Feature), DSS (Direct Station Selection), SAVE or REDIAL button.

User Manual 267