Station Programming

Exiting Station Programming mode

PT

When the display shows the initial programming mode;

PAUSE

or

Press PAUSE or lift the handset.

To exit the Station Programming mode, press PAUSE. You are in the call handling mode.

Confirming the assigned function data

Be sure that you are in the Station Programming mode: Press [PAUSE] [9] [9].

PT

HOLD

program access number

Enter the program access number.

Press HOLD (END).

The display shows the initial programming mode.

Enter the program access number* as follows.

-1:Preferred Line Assignment - Outgoing

-2:Preferred Line Assignment - Incoming

-3:Full One-Touch Dialing Assignment

-4:Intercom Alert Assignment

-5:Call Waiting Tone Type Assignment

-6:Self-Extension Number Confirmation

-7:Live Call Screening Mode Set

-81:Initial Display Selection

-01:Remote Station Look Control (- Operator / Manager only)

-02:Call Log Lock Control, Incoming (- Operator / Manager only)

-03:Live Call Screening Password Control(- Operator / Manager only) - #:Station Programming Data Default Set

The display shows the programmed data.

<PT Display Example>

When you press [5], the display shows:

C.W. Tone1

(- The Call Waiting tone is currently programmed to Tone 1.)

*A programming access number is required to program/confirm the function data by Station Programming.

: Available when the Advanced Hybrid System is connected to a Proprietary Telephone capable Panasonic Voice Processing System (one that supports DPT Integration; e.g., KX-TVS50)

To exit the Station Programming mode: Press [PAUSE] or lift the handset.

If you wish to change the data, follow the programming procedure explained in this section.

User Manual

31

Page 31
Image 31
Panasonic KX-TA1232 Exiting Station Programming mode, When the display shows the initial programming mode, Tone1