User Programming

The display shows the Initial Message: USR-PGM NO?

Note

If nothing is entered within five seconds after the PAUSE button is pressed, programming mode is canceled.

During the programming mode, your extension is treated as a busy extension.

Only one proprietary telephone can be in programming mode at any one time.

The User Programming Password is not shown on the display for security reason. The password can be changed by System Programming.

Programming Guide References

[120] User Password

In this section, programs [001] through [004] and [017] are explained. Please consult with your dealer when you need to change the following programs:

[005] Flexible CO Button Assignment

[006] Operator / Manager Extension Assignment

[007] DSS Console Port and Paired Telephone Assignment

[008] Absent Messages

[009] Quick Dial Number Set

[014] VM Name Set

46

User Manual

Page 46
Image 46
Panasonic KX-TA1232 user manual Programming Guide References