Station Features and Operation (PT/SLT)

Two extensions can set each other as the destination extension. In this case, an intercom call to the other party while he/she is absent will not be forwarded back to the original extension.

Confirmation tone

Confirmation tone 2 (two beeps) is sent when the previously programmed data is same as the new data. If it is not, confirmation tone 1 (one beep) is sent. Refer to the "Tone List" in the Appendix.

You can call the original extension from the Call Forwarding destination extension. (Boss Secretary)

<PT>

Both the Call Forwarding and Do Not Disturb (DND) functions can be programmed at the same time, but either one of them can be activated at a time.

You can enable or disable the Call Forwarding or Do Not Disturb (DND) function by pressing the FWD/DND button while on-hook. If you set both Call Forwarding and DND, alternating the mode is also available by pressing the FWD/DND button. In this case, pressing the button changes the setting as follows:

DND FWD OFF

The lighting patterns of the FWD/DND button are as follows:

Off: Both functions are canceled.

Red on : DND mode*1

Red flash : FWD mode*1

User Manual References

2.2.2Flexible Button Assignment

4.3.15Call Forwarding — CANCEL

4.3.38Do Not Disturb (DND)

4.3.84Voice Mail Integration

*1 This setting can changed by System Programming.

User Manual

83

Page 83
Image 83
Panasonic KX-TA1232 user manual Confirmation tone, Dnd Fwd Off