Panasonic KX-TA1232 user manual SPD Code?→, 000Not Stored, Speed dial no, Telephone no

User Programming

Programming

Display PT

0

0

Dial 001.

1

NEXT

	speed dial no.
Press NEXT.	Enter a speed dial number
	(000 through 499).

<PT Display>

001 SYS SPD DIAL

Repeat these steps

<PT Display>

SPD Code?→

To enter speed dial number 000, you can also press NEXT.

<PT Display Example>

000:Not Stored

<To continue:> [When SELECT is pressed]

STORE

telephone no.

Enter a telephone number. Press STORE.

NEXT

PREV

speed dial no.

Enter the desired speed

dial number

(000 through 499).

To delete the current entry, press CLEAR. To change the current entry, press CLEAR and enter the new number.

SELECT

Press NEXT or

PREV or SELECT.

<To end:>

END

Press END.

Conditions

•Each speed dial number has a maximum of 24 digits. The valid characters are 0 through

9, , and # keys, and the FLASH, PAUSE, SECRET and "–" (hyphen) buttons.

—To store the flash signal, press FLASH.

Note: The Stored flash will only be effective during an established call.

—To store a hyphen, press the "–" button.

—To store a pause, press PAUSE.

(Refer to Pulse to Tone Conversion in the Features Guide)

User Manual 53