Panasonic KX-TA1232 user manual 137

Station Features and Operation (PT/SLT)

Each number must be one digit.

The DISA built-in auto attendant number may be the same as the first digit of other numbers (extension number, Floating Number, etc.). To avoid confusion, the system waits for the second digit for a pre-programmed amount of time (default: 1 s). If the second digit is not dialed until the timer expires, the system assumes that the first digit is a DISA built-in auto attendant number.

•DISA Call Duration

Extending the call duration can be enabled (from 1 to 7 minutes) or disabled by System Programming. The caller can extend the call duration up to 10 times, or as many times as the caller wants (no limit) depending on System Programming.

•Outside-to-Outside Line Call Duration

When the "Outside-to-Outside Line Call Duration Time" expires, both lines are disconnected unless the caller re-tries or extends the time (default: 3 min), if available. A warning tone is sent at five second intervals to both parties, fifteen seconds before the time limit.

Programming Guide References

<To enable DISA feature>

[017] DISA User Codes

[407-408] DIL 1:1 Extension —— Day / Night

[809] DISA Security Type

[813]Floating Number Assignment

[815]DISA Built-in Auto Attendant

[990]System Additional Information

<To set DISA timer values>

[202] Call Forwarding — No Answer Time

[206]Outside-to-Outside Line Call Duration Time

[214]DISA Prolong Time

[218]DISA AA Wait Time

<To enable the Intercept Routing feature>

[203] Intercept Time

[409-410] Intercept Extension —— Day / Night

[990] System Additional Information

Features Guide References

Intercept Routing

User Manual References

3.2.5[017] DISA User Codes

4.4.7Outgoing Message (OGM)

User Manual 137