Activate/deactivate the remote access
You can allow or block remote access to the answering machine.
1 | Tap | from the main menu screen. |
2 | Select [Remote access]. | |
3 | Tap the switch to turn it on or off. | |
»»The setting is saved.
Tip
•• When you access the answering machine remotely, you are recommended to set the ring delay to[Toll saver] mode.This is a cost effective way to manage your messages.When there are new messages, the answering machine picks up the call after 3 rings.When there is no messages, it picks up the call after 5 rings, giving you the opportunity to hang up before a connection is established in case there are no new message.
Change the PIN/passcode
1 | Tap | from the main menu screen. |
2 | Select [Remote access] > [Change PIN]. | |
3 | Enter the old remote access PIN/passcode, | |
4 | then tap [OK] to confirm. | |
Enter the new remote access PIN/passcode, | ||
5 | then tap [OK] to confirm. | |
Enter the new remote access PIN/passcode | ||
| again, then tap [OK] to confirm. | |
»»The setting is saved.
Access the answering machine remotely
1 | Make a call to your home number with a |
2 | touch tone phone. |
Enter # when you hear the announcement. | |
3 | Enter your PIN code. |
»»You now have access to your answering machine, and you can listen to the new messages.
Note
•• You have 2 chances to enter the correct PIN code before your phone hangs up.
4 Press a key to carry out a function. See the Remote access commands table below for a list of available functions.
Note
•• When there is no message, the phone hangs up automatically if no key is pressed for 8 seconds.
Remote access commands
Key Function
1Repeat the current or listen to the previous message.
2Listen to messages.
3Skip to the next message.
6Delete the current message.
7Switch the answering machine on. (not available when you listen to the messages).
8Stop listening to the message.
9Switch the answering machine off. (not available when you listen to the messages).
E n g l i s h
EN 29
