MAINTENANCE
Gear housing
There is a grease nipple and a plug for filling lubricant on the gear housing. Use a grease gun to fill with grease.This should be done after every 60 working hours. Use Jonsered special grease.
CAUTION! The gear housing must not be filled completely with grease. The grease expands as the machine heats up during operation. If the gear housing was completely filled with grease it could damage the seals and lead to leakage of grease.
The grease in the bevel gear does not normally need to be changed except if repairs are carried out.
Cleaning and lubrication
Clean any resin and plant residue from the blades using cleaning agent before and after using the machine.
Lubricate the blade bars with special grease before long periods of storage.
IMPORTANT! Use only JONSERED replacement parts. Use of other brands of replacement parts can cause damage to your unit or injury to the operator or others.Your warranty does not cover damage or liability caused by the use of accessories and/or attachments not specifically recommended by JONSERED.
English – 17