Jonsered HT 2124T manual KEY to Symbols

Page 2

KEY TO SYMBOLS

Symbols

WARNING! Incorrect or careless use of a hedge trimmer can turn it into a dangerous tool that can cause serious or even fatal injury. It is extremely important that you read and understand the contents of this operator’s manual.

Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.

Always wear:

• Approved hearing protection

• Approved eye protection

Always wear approved protective gloves.

Wear sturdy, non-slip boots or shoes.

Other symbols/decals on the machine refer to special certification requirements for certain markets.

Switch off the engine by moving the stop switch to the STOP position before carrying out any checks or maintenance.

Always wear approved protective gloves.

Regular cleaning is required.

Visual check.

Protective goggles or a visor must be worn.

2 – English

Image 2
Contents Operator’s manual EPA KEY to Symbols SymbolsContents Introduction Dear customerWhat is WHAT? What is what?General Safety Precautions Personal protective equipmentThrottle lockout Machine′s safety equipmentStop switch Hand guardVibration damping system MufflerBlade guard Gear housingBlades Fuel Fuel safetyFuel Handling Fueling MixingStarting and stopping Starting and StoppingCheck before starting Working Techniques Safety instructions regarding the surroundingsSafety instructions while working General working instructionsSafety instructions after completing work Basic working techniquesCarburetor MaintenanceAdjusting the idle speed MufflerSpark plug Cleaning the air filterCooling system Air filterGear housing Cleaning and lubricationMaintenance schedule Maintenance Daily Weekly MonthlyTechnical Data Technical dataFederal Emission Control Warranty Statement Your Warranty Rights and ObligationsPage ´z+RAo¶5c¨ Page 1150337-95 ´z+RAo¶5c¨ ´z+RAo¶5c¨