Jonsered 2125 manual Grass trimming using a trimmer head and plastic blades, Trimming

Page 11

SAFETY INSTRUCTIONS

Grass trimming using a trimmer head and plastic blades

Trimming

•Hold the trimmer head just above the ground at an angle. It is the end of the cord that does the work. Let the cord work at its own pace. Never press the cord into the area to be cut.

•The cord can easily remove grass and weeds up against walls, fences, trees and borders, however it can also damage sensitive bark on trees and bushes, and damage fence posts.

•Reduce the risk of damaging plants by shortening the cord to 10-12 cm and reducing the engine speed.

Clearing

•The clearing technique removes all unwanted vegetation. Keep the trimmer head just above the ground and tilt it. Let the end of the cord strike the ground around trees, posts, statues and the like. CAUTION! This technique increases the wear on the cord.

•The cord wears quicker and must be fed forward more often when working against stones, brick, concrete, metal fences, etc., than when coming into contact with trees and wooden fences.

•When trimming and clearing you should use less than full throttle so that the cord lasts longer and to reduce the wear on the trimmer head.

Cutting

•The trimmer is ideal for cutting grass that is difficult to reach using a normal lawn mower. Keep the cord parallel to the ground when cutting. Avoid pressing the trimmer head against the ground as this can ruin the lawn and damage the tool.

•Do not allow the trimmer head to constantly come into contact with the ground during normal cutting. Constant contact of this type can cause damage and wear to the trimmer head.

Sweeping

•The fan effect of the rotating cord can be used for quick and easy clearing up. Hold the cord parallel to and above the area to be swept and move the tool to and fro.

•When cutting and sweeping you should use full throttle to obtain the best results.

WARNING! Neither the operator of the

!machine nor anyone else may attempt to remove the cut material while the engine is running or the blade is rotating, as this can result in serious injury.

Stop the engine and blade before you remove material that has wound around the blade shaft as otherwise there is a risk of injury. The bevel gear can get hot during use and may remain so for a while afterwards. You could get burnt if you touch it.

WARNING! Watch out for thrown objects.

!Always wear eye protection. Never lean over the cutting attachment guard. Stones, rubbish, etc. can be thrown up into the eyes causing blindness or serious injury.

Keep unauthorised persons at a distance. Children, animals, onlookers and helpers should be kept outside the safety zone of 15 m. Stop the machine immediately if anyone approaches.

English – 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Operator’s manual EPA Symbols KEY to SymbolsContents Personal protective equipment Safety InstructionsMachine′s safety equipment Locking nut Vibration damping systemMuffler Cutting equipmentNever use a machine that has a faulty muffler Safety Instructions Trimmer head Cutting equipmentSharpening grass cutters and grass blades Transport and storage General safety precautionsFuel safety StartingBasic working techniques Basic safety rulesGrass clearing using a grass blade General working instructionsTrimming Grass trimming using a trimmer head and plastic bladesWhat is what on the trimmer? What is WHAT?Fitting blades and trimmer heads AssemblyFitting the loop handle Fitting the J-handleFitting the trimmer guard and Auto 32 trimmer head Guard Fitting other guards and cutting attachmentsFitting the trimmer guard and trimmer head Two-stroke oil Fuel HandlingFuel GasolineFueling Starting and stopping Starting and StoppingCheck before starting Stopping Carburetor MaintenanceHigh speed jet H Fine adjustment of the idle speed TCorrectly adjusted carburetor MufflerAir filter Cleaning the air filterCooling system Bevel gearMonthly maintenance Maintenance scheduleDaily maintenance Weekly maintenanceTechnical data Technical DataApproved accessories Type Cutting attachment guard, Art. no Your Warranty Rights and Obligations Federal Emission Control Warranty StatementTrimmy H S35 25 m ´z*x3¶5U¨ Auto 1088931-95 ´z*x3¶5U¨ ´z*x3¶5U¨

2125 specifications

The Jonsered 2125 is a powerful and versatile chainsaw that has earned a reputation among forestry professionals and enthusiasts alike. Engineered for performance and durability, this model incorporates several features and technologies that set it apart from its competitors.

At its heart, the Jonsered 2125 boasts a robust 50cc engine, designed to deliver impressive power while maintaining efficiency. The high power-to-weight ratio ensures that users can tackle demanding tasks without the strain that typically accompanies heavier models. This chainsaw strikes an excellent balance between performance and ease of use, making it suitable for both novice and experienced users.

One of the standout features of the Jonsered 2125 is its advanced ignition system, which includes an electronically controlled ignition module. This innovation enhances starting reliability, even in challenging conditions. The saw's carburetor is finely tuned for optimal fuel delivery, contributing to consistent operation and reduced emissions. Users will appreciate the environmentally friendly design, which meets stringent emission standards without compromising on performance.

The chainsaw's ergonomics play a crucial role in the overall user experience. With a well-designed handle and lightweight construction, the Jonsered 2125 reduces operator fatigue during extended use. The anti-vibration technology integrated into the design minimizes vibrations felt in the handles, allowing for safer and more comfortable operation.

Safety features are paramount in the design of the Jonsered 2125. The chainsaw is equipped with a chain brake that activates quickly in emergencies, preventing kickback incidents. Additionally, the throttle lock ensures that the chainsaw does not accidentally start, providing peace of mind to users during transport and setup.

Maintenance is made straightforward with the Jonsered 2125. The side-mounted chain tensioner allows for quick adjustments without the need for special tools. This feature is particularly valuable for users who require a reliable chainsaw ready for action at a moment’s notice.

In conclusion, the Jonsered 2125 is a highly capable chainsaw that combines power, efficiency, and user-friendly features. With its advanced technologies, ergonomic design, and strong safety characteristics, it remains a preferred choice for those who demand quality and performance in their outdoor tools. Whether conducting professional forestry work or tackling home improvement projects, the Jonsered 2125 delivers reliable results.
Top Page Image Contents