Jonsered 2125 manual Spark plug, Maintenance schedule, Daily maintenance, Weekly maintenance

Page 23

MAINTENANCE

Spark plug

The spark plug condition is influenced by:

Incorrect carburetor adjustment.

An incorrect fuel mixture (too much or incorrect type of oil).

A dirty air filter.

These factors cause deposits on the spark plug electrodes, which may result in operating problems and starting difficulties.

If the machine is low on power, difficult to start or runs poorly at idle speed: always check the spark plug first before taking any further action. If the spark plug is dirty, clean it and check that the electrode gap is 0.5 mm (0,020"). The spark plug should be replaced after about a month in operation or earlier if necessary.

CAUTION! Always use the recommended spark plug type! Use of the wrong spark plug can damage the piston/cylinder.

Maintenance schedule

Below you will find some general maintenance instructions. If you need further information please contact your service workshop.

Daily maintenance

Check throttle trigger and throttle trigger lockout function.

Check that the stop switch works correctly.

Check that the cutting attachment always stops when the engine is idling.

Clean the outside of the machine.

Check that the harness is not damaged.

Check that the blade guard is not damaged or cracked. Replace the blade guard if it is exposed to impact or is cracked.

Check that the blade is properly centered, sharp and without cracks.

Check that the trimmer head is undamaged and not cracked. Replace the trimmer head if necessary.

A non-balanced blade/trimmer head induces heavy vibrations that may damage the machine.

Check that the blade nut is sufficiently tightened.

Check that the transport guard for the blade is intact and that it can be secured correctly.

Check that nuts and screws are tight.

Check that there are no fuel leaks from the engine, tank or fuel lines.

Weekly maintenance

Check the starter and starter cord.

Clean the outside of the carburetor.

Clean the outside of the spark plug. Remove it and check the electrode gap. Adjust the gap to 0.5 mm (.20”), or replace the spark plug. Check that the spark plug is fitted with a suppressor.

Clean the cooling fins on the cylinder and check that the air intake near the starter is not blocked.

Check that the bevel gear is filled with grease up to 3/4. Use special grease.

Clean the air filter.

Clean or replace the spark arrestor mesh on the muffler (only applies to mufflers without a catalytic converter).

Monthly maintenance

Clean the fuel tank.

Clean the outside of the carburettor and the space around it.

Check fuel hose for cracks or other damage. Change if necessary.

Change the fuel filter in fuel tank.

Check electrical wires and connections.

Replace the spark plug. Check that the spark plug is fitted with a suppressor.

Change the air filter.

Check and clean the spark arrestor mesh on the muffler (only applies to mufflers fitted with a catalytic converter).

English – 23

Image 23
Contents Operator’s manual EPA Symbols KEY to SymbolsContents Personal protective equipment Safety InstructionsMachine′s safety equipment Locking nut Vibration damping systemMuffler Cutting equipmentNever use a machine that has a faulty muffler Safety Instructions Trimmer head Cutting equipmentSharpening grass cutters and grass blades Transport and storage General safety precautionsFuel safety StartingBasic working techniques Basic safety rulesGrass clearing using a grass blade General working instructionsTrimming Grass trimming using a trimmer head and plastic bladesWhat is what on the trimmer? What is WHAT?Fitting blades and trimmer heads AssemblyFitting the loop handle Fitting the J-handleFitting the trimmer guard and Auto 32 trimmer head Guard Fitting other guards and cutting attachmentsFitting the trimmer guard and trimmer head Two-stroke oil Fuel HandlingFuel GasolineFueling Starting and stopping Starting and StoppingCheck before starting Stopping Carburetor MaintenanceHigh speed jet H Fine adjustment of the idle speed TCorrectly adjusted carburetor MufflerAir filter Cleaning the air filterCooling system Bevel gearMonthly maintenance Maintenance scheduleDaily maintenance Weekly maintenanceTechnical data Technical DataApproved accessories Type Cutting attachment guard, Art. no Your Warranty Rights and Obligations Federal Emission Control Warranty StatementTrimmy H S35 25 m ´z*x3¶5U¨ Auto 1088931-95 ´z*x3¶5U¨ ´z*x3¶5U¨

2125 specifications

The Jonsered 2125 is a powerful and versatile chainsaw that has earned a reputation among forestry professionals and enthusiasts alike. Engineered for performance and durability, this model incorporates several features and technologies that set it apart from its competitors.

At its heart, the Jonsered 2125 boasts a robust 50cc engine, designed to deliver impressive power while maintaining efficiency. The high power-to-weight ratio ensures that users can tackle demanding tasks without the strain that typically accompanies heavier models. This chainsaw strikes an excellent balance between performance and ease of use, making it suitable for both novice and experienced users.

One of the standout features of the Jonsered 2125 is its advanced ignition system, which includes an electronically controlled ignition module. This innovation enhances starting reliability, even in challenging conditions. The saw's carburetor is finely tuned for optimal fuel delivery, contributing to consistent operation and reduced emissions. Users will appreciate the environmentally friendly design, which meets stringent emission standards without compromising on performance.

The chainsaw's ergonomics play a crucial role in the overall user experience. With a well-designed handle and lightweight construction, the Jonsered 2125 reduces operator fatigue during extended use. The anti-vibration technology integrated into the design minimizes vibrations felt in the handles, allowing for safer and more comfortable operation.

Safety features are paramount in the design of the Jonsered 2125. The chainsaw is equipped with a chain brake that activates quickly in emergencies, preventing kickback incidents. Additionally, the throttle lock ensures that the chainsaw does not accidentally start, providing peace of mind to users during transport and setup.

Maintenance is made straightforward with the Jonsered 2125. The side-mounted chain tensioner allows for quick adjustments without the need for special tools. This feature is particularly valuable for users who require a reliable chainsaw ready for action at a moment’s notice.

In conclusion, the Jonsered 2125 is a highly capable chainsaw that combines power, efficiency, and user-friendly features. With its advanced technologies, ergonomic design, and strong safety characteristics, it remains a preferred choice for those who demand quality and performance in their outdoor tools. Whether conducting professional forestry work or tackling home improvement projects, the Jonsered 2125 delivers reliable results.