Jonsered 2125 manual Starting and Stopping, Check before starting, Starting and stopping

Page 18

STARTING AND STOPPING

Check before starting

•Check that the support flange is not cracked due to fatigue or due to being tightened too much. Discard the support flange if it is cracked.

•Ensure the locking nut has not lost its captive force. The nut lock should have a locking force of at least 1.5 Nm. The tightening torque of the locking nut should be 35-50 Nm.

•Check that the blade guard is not damaged or cracked. Replace the blade guard if it is exposed to impact or is cracked.

•Check that the trimmer head and trimmer guard are not damaged or cracked. Replace the trimmer head or trimmer guard if they have been exposed to impact or are cracked.

•Never use the machine without a guard nor with a defective guard.

Starting and stopping

WARNING! The complete clutch cover and

!shaft must be fitted before the machine is started, otherwise the clutch can come loose and cause personal injury.

Always move the machine away from the refuelling area before starting. Place the machine on a flat surface. Ensure the cutting attachment cannot come into contact with any object.

Make sure no unauthorised persons are in the working area, otherwise there is a risk of serious personal injury. The safety distance is 15 metres.

Starting

Ignition:

Set the stop switch to the start position.

Primer bulb: Press the primer bulb repeatedly until fuel begins to fill the bulb. The bulb need not be completely filled.

Choke: Set the choke control in the choke position.

WARNING! When the engine is started with

!the choke in either the choke or start throttle positions the cutting attachment will start to rotate immediately.

Hold the body of the machine on the ground using your left hand (CAUTION! Not with your foot!). Grip the starter handle, slowly pull out the cord with your right hand until you feel

18 – English

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Operator’s manual EPA KEY to Symbols SymbolsContents Safety Instructions Machine′s safety equipmentPersonal protective equipment Cutting equipment Vibration damping systemMuffler Locking nutNever use a machine that has a faulty muffler Safety Instructions Cutting equipment Sharpening grass cutters and grass bladesTrimmer head Starting General safety precautionsFuel safety Transport and storageGeneral working instructions Basic safety rulesGrass clearing using a grass blade Basic working techniquesGrass trimming using a trimmer head and plastic blades TrimmingWhat is WHAT? What is what on the trimmer?Fitting the J-handle AssemblyFitting the loop handle Fitting blades and trimmer headsFitting the trimmer guard and Auto 32 trimmer head Fitting other guards and cutting attachments Fitting the trimmer guard and trimmer headGuard Gasoline Fuel HandlingFuel Two-stroke oilFueling Starting and Stopping Check before startingStarting and stopping Stopping Maintenance CarburetorMuffler Fine adjustment of the idle speed TCorrectly adjusted carburetor High speed jet HBevel gear Cleaning the air filterCooling system Air filterWeekly maintenance Maintenance scheduleDaily maintenance Monthly maintenanceTechnical Data Technical dataApproved accessories Type Cutting attachment guard, Art. no Federal Emission Control Warranty Statement Your Warranty Rights and ObligationsTrimmy H S35 25 m ´z*x3¶5U¨ Auto 1088931-95 ´z*x3¶5U¨ ´z*x3¶5U¨

2125 specifications

The Jonsered 2125 is a powerful and versatile chainsaw that has earned a reputation among forestry professionals and enthusiasts alike. Engineered for performance and durability, this model incorporates several features and technologies that set it apart from its competitors.

At its heart, the Jonsered 2125 boasts a robust 50cc engine, designed to deliver impressive power while maintaining efficiency. The high power-to-weight ratio ensures that users can tackle demanding tasks without the strain that typically accompanies heavier models. This chainsaw strikes an excellent balance between performance and ease of use, making it suitable for both novice and experienced users.

One of the standout features of the Jonsered 2125 is its advanced ignition system, which includes an electronically controlled ignition module. This innovation enhances starting reliability, even in challenging conditions. The saw's carburetor is finely tuned for optimal fuel delivery, contributing to consistent operation and reduced emissions. Users will appreciate the environmentally friendly design, which meets stringent emission standards without compromising on performance.

The chainsaw's ergonomics play a crucial role in the overall user experience. With a well-designed handle and lightweight construction, the Jonsered 2125 reduces operator fatigue during extended use. The anti-vibration technology integrated into the design minimizes vibrations felt in the handles, allowing for safer and more comfortable operation.

Safety features are paramount in the design of the Jonsered 2125. The chainsaw is equipped with a chain brake that activates quickly in emergencies, preventing kickback incidents. Additionally, the throttle lock ensures that the chainsaw does not accidentally start, providing peace of mind to users during transport and setup.

Maintenance is made straightforward with the Jonsered 2125. The side-mounted chain tensioner allows for quick adjustments without the need for special tools. This feature is particularly valuable for users who require a reliable chainsaw ready for action at a moment’s notice.

In conclusion, the Jonsered 2125 is a highly capable chainsaw that combines power, efficiency, and user-friendly features. With its advanced technologies, ergonomic design, and strong safety characteristics, it remains a preferred choice for those who demand quality and performance in their outdoor tools. Whether conducting professional forestry work or tackling home improvement projects, the Jonsered 2125 delivers reliable results.
Top Page Image Contents