Hayter Mowers 407D manual How To Lubricate, Jackshaft Assembly, How To Change Engine Oil

Page 15

	MAINTENANCE
	LUBRICATION
	How To Lubricate	Grease Fitting
	The Jackshaft Assembly
	A grease fitting is provided to lubricate the
	jackshaft assembly. Use a grease gun with au-
	tomotive type grease to lubricate the jackshaft	Figure 10
	assembly as shown in Figure 10.	Figure 10
	assembly as shown in Figure 10.

How To Change Engine Oil

Change the engine oil when the engine is warm. For the proper oil capacity, see the en- gine manufacturer’s instructions.

1.Disconnect spark plug wire from the spark plug.

2.Remove the oil drain plug as shown in Figure 11.

3.Drain all the engine oil into a flat pan.

4.Install the oil drain plug. Make sure the oil drain plug is tight.

5.Remove the dipstick.

6.Fill the engine crankcase. DO NOT OVERFILL. For proper oil capacity, see the engine manufacturer’s instructions.

7.Connect the spark plug wire to the spark plug.

Oil Drain Plug

Figure 11

276798MA DRAFT COPY

15

Image 15

Contents Powertrim Table of Contents Hayter Limited Limited WarrantyGeneral Operation Safety RulesSafety Precautions Responsibility Of The OwnerService ChildrenSlope Operation Never run an engine indoors or inside a closed area Control And Operating Pictorials Safety Warning PictorialsAssembly Assembly Contents of Parts BAGTo Remove the Trimmer from Carton HOW to Attach the Guard HOW to Raise the HandleEngine Preparation Fill Crankcase With OilFill Fuel Tank With Petrol Operation Know Your PowertrimHOW to Stop Trimmer Head HOW to Stop the EngineHOW to USE Trimmer Head Drive Lever HOW to USE Throttle ControlHOW to USE Primer Button Trimmer Tips HOW to Start the EngineMaintenance Product SpecificationsCustomer Responsibilities How To Lubricate Jackshaft AssemblyHow To Change Engine Oil Spark Plug HOW to Adjust the Height of the HandlebarHOW to Change Trimmer Lines Service and Adjustment HOW to Replace the Trimmer LineHOW to Replace the Drive Belt Storage TrimmerEngine Trouble Cause Correction Trouble Shooting ChartEngine will not stop Code 407D Key Description Code 407D Code 407D 276798MA Draft Copy 276798MA Draft Copy How To Order Replacement Parts